From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] ARM: msm: Move dma.h #defines that are private to dma.c
Date: Wed, 19 Sep 2012 00:00:40 -0700 [thread overview]
Message-ID: <1348038044-1790-2-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1348038044-1790-1-git-send-email-sboyd@codeaurora.org>
These #defines are only used by the dma.c file within mach-msm.
Don't put them into a global mach include that any driver can use
to muck with registers within the dma controller. This also
prevents random people from getting access to msm_iomap.h
(a file that will soon be private to mach-msm).
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/mach-msm/dma.c | 26 ++++++++++++++++++++++++++
arch/arm/mach-msm/include/mach/dma.h | 26 --------------------------
2 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index 354b91d..b279fd8 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -19,9 +19,35 @@
#include <linux/interrupt.h>
#include <linux/completion.h>
#include <mach/dma.h>
+#include <mach/msm_iomap.h>
#define MSM_DMOV_CHANNEL_COUNT 16
+#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
+#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
+#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
+#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define DMOV_SD_AARM DMOV_SD2
+#else
+#define DMOV_SD_AARM DMOV_SD3
+#endif
+
+#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch)
+#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch)
+#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch)
+#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch)
+#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch)
+#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch)
+#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch)
+#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch)
+
+#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch)
+#define DMOV_ISR DMOV_SD_AARM(0x380, 0)
+
+#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch)
+
enum {
MSM_DMOV_PRINT_ERRORS = 1,
MSM_DMOV_PRINT_IO = 2,
diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h
index 05583f5..a72d48d 100644
--- a/arch/arm/mach-msm/include/mach/dma.h
+++ b/arch/arm/mach-msm/include/mach/dma.h
@@ -16,7 +16,6 @@
#ifndef __ASM_ARCH_MSM_DMA_H
#include <linux/list.h>
-#include <mach/msm_iomap.h>
struct msm_dmov_errdata {
uint32_t flush[6];
@@ -45,48 +44,23 @@ static inline
int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; }
#endif
-
-#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
-#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
-#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
-#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#define DMOV_SD_AARM DMOV_SD2
-#else
-#define DMOV_SD_AARM DMOV_SD3
-#endif
-
-#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch)
#define DMOV_CMD_LIST (0 << 29) /* does not work */
#define DMOV_CMD_PTR_LIST (1 << 29) /* works */
#define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */
#define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */
#define DMOV_CMD_ADDR(addr) ((addr) >> 3)
-#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch)
#define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */
#define DMOV_RSLT_ERROR (1 << 3)
#define DMOV_RSLT_FLUSH (1 << 2)
#define DMOV_RSLT_DONE (1 << 1) /* top pointer done */
#define DMOV_RSLT_USER (1 << 0) /* command with FR force result */
-#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch)
-#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch)
-#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch)
-#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch)
-#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch)
-#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch)
-
-#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch)
#define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29))
#define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3)
#define DMOV_STATUS_RSLT_VALID (1 << 1)
#define DMOV_STATUS_CMD_PTR_RDY (1 << 0)
-#define DMOV_ISR DMOV_SD_AARM(0x380, 0)
-
-#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch)
#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
#define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1)
#define DMOV_CONFIG_IRQ_EN (1 << 0)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2012-09-19 7:00 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-19 7:00 [PATCH 0/5] Trim down mach includes in MSM drivers Stephen Boyd
2012-09-19 7:00 ` Stephen Boyd [this message]
2012-09-19 7:00 ` [PATCH 2/5] mmc: msm_sdcc: Remove unnecessary include Stephen Boyd
2012-09-19 7:21 ` Chris Ball
2012-09-19 7:00 ` [PATCH 3/5] video: msm: Remove useless mach/* includes Stephen Boyd
2012-09-23 19:52 ` Florian Tobias Schandinat
2012-09-19 7:00 ` [PATCH 4/5] gpio: Make gpio-msm-v1 into a platform driver Stephen Boyd
2012-09-20 6:45 ` Linus Walleij
2012-09-20 16:08 ` David Brown
2012-09-20 20:14 ` Rohit Vaswani
2012-09-19 7:00 ` [PATCH 5/5] ARM: msm: Remove unused cpu.h header file Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348038044-1790-2-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).