linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 33/34] ARM: imx: call mxc_device_init() in soc specific function
Date: Thu, 20 Sep 2012 14:45:46 +0800	[thread overview]
Message-ID: <1348123547-31082-34-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1348123547-31082-1-git-send-email-shawn.guo@linaro.org>

mxc_device_init() is a core_initcall function used to register devices
for mxc_aips_bus and mxc_ahb_bus, which are needed by gpio and dma
device registration.

Instead of being a core_initcall function, we have it called in soc
specific initialization function before gpio and dma devices get
registered, so that it will not be called for other platforms when
we enable multi-platform support for imx.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/common.h          |    1 +
 arch/arm/mach-imx/devices/devices.c |    3 +--
 arch/arm/mach-imx/mm-imx21.c        |    2 ++
 arch/arm/mach-imx/mm-imx25.c        |    2 ++
 arch/arm/mach-imx/mm-imx27.c        |    2 ++
 arch/arm/mach-imx/mm-imx3.c         |    4 ++++
 arch/arm/mach-imx/mm-imx5.c         |    4 ++++
 7 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index ead9018..ef8db6b 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -79,6 +79,7 @@ extern void mxc_arch_reset_init(void __iomem *);
 extern int mx53_revision(void);
 extern int mx53_display_revision(void);
 extern void imx_set_aips(void __iomem *);
+extern int mxc_device_init(void);
 
 enum mxc_cpu_pwr_mode {
 	WAIT_CLOCKED,		/* wfi only */
diff --git a/arch/arm/mach-imx/devices/devices.c b/arch/arm/mach-imx/devices/devices.c
index 9301e07..1b37482 100644
--- a/arch/arm/mach-imx/devices/devices.c
+++ b/arch/arm/mach-imx/devices/devices.c
@@ -32,7 +32,7 @@ struct device mxc_ahb_bus = {
 	.parent		= &platform_bus,
 };
 
-static int __init mxc_device_init(void)
+int __init mxc_device_init(void)
 {
 	int ret;
 
@@ -45,4 +45,3 @@ static int __init mxc_device_init(void)
 done:
 	return ret;
 }
-core_initcall(mxc_device_init);
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 8868398..d8ccd3a 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -82,6 +82,8 @@ static const struct resource imx21_audmux_res[] __initconst = {
 
 void __init imx21_soc_init(void)
 {
+	mxc_device_init();
+
 	mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 	mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 	mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index 9be33cd..9357707 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -89,6 +89,8 @@ static const struct resource imx25_audmux_res[] __initconst = {
 
 void __init imx25_soc_init(void)
 {
+	mxc_device_init();
+
 	/* i.mx25 has the i.mx35 type gpio */
 	mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
 	mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index ecaa5b9..4f1be65 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -82,6 +82,8 @@ static const struct resource imx27_audmux_res[] __initconst = {
 
 void __init imx27_soc_init(void)
 {
+	mxc_device_init();
+
 	/* i.mx27 has the i.mx21 type gpio */
 	mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
 	mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 072b3bf..f718bf5 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -175,6 +175,8 @@ void __init imx31_soc_init(void)
 
 	imx3_init_l2x0();
 
+	mxc_device_init();
+
 	mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
 	mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
 	mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
@@ -271,6 +273,8 @@ void __init imx35_soc_init(void)
 
 	imx3_init_l2x0();
 
+	mxc_device_init();
+
 	mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
 	mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
 	mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index e739553..f92caf1 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -138,6 +138,8 @@ static const struct resource imx51_audmux_res[] __initconst = {
 
 void __init imx50_soc_init(void)
 {
+	mxc_device_init();
+
 	/* i.mx50 has the i.mx35 type gpio */
 	mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
 	mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
@@ -153,6 +155,8 @@ void __init imx50_soc_init(void)
 
 void __init imx51_soc_init(void)
 {
+	mxc_device_init();
+
 	/* i.mx51 has the i.mx35 type gpio */
 	mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
 	mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
-- 
1.7.9.5

  parent reply	other threads:[~2012-09-20  6:45 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-20  6:45 [PATCH v2 00/34] i.MX multi-platform support Shawn Guo
2012-09-20  6:45 ` [PATCH v2 01/34] ARM: imx: include board headers in the same folder Shawn Guo
2012-09-20  6:45 ` [PATCH v2 02/34] ARM: imx: move iomux drivers and headers into mach-imx Shawn Guo
2012-09-20  6:45 ` [PATCH v2 03/34] ARM: imx: remove unnecessary inclusion from device-imx*.h Shawn Guo
2012-09-20  6:45 ` [PATCH v2 04/34] ARM: imx: move platform device code into mach-imx Shawn Guo
2012-09-20  6:45 ` [PATCH v2 05/34] ARM: imx: merge plat-mxc " Shawn Guo
2012-09-20  6:45 ` [PATCH v2 06/34] ARM: imx: include common.h rather than mach/common.h Shawn Guo
2012-09-20  6:45 ` [PATCH v2 07/34] ARM: imx: ARM: imx: include cpuidle.h rather than mach/cpuidle.h Shawn Guo
2012-09-20  6:45 ` [PATCH v2 08/34] ARM: imx: include iim.h rather than mach/iim.h Shawn Guo
2012-09-20  6:45 ` [PATCH v2 09/34] ARM: imx: include iram.h rather than mach/iram.h Shawn Guo
2012-09-20  6:45 ` [PATCH v2 10/34] ARM: imx: include ulpi.h rather than mach/ulpi.h Shawn Guo
2012-09-20  6:45 ` [PATCH v2 11/34] media: mx1_camera: remove the driver Shawn Guo
2012-09-20 12:56   ` Mauro Carvalho Chehab
2012-09-20 14:47     ` Shawn Guo
2012-09-20  6:45 ` [PATCH v2 12/34] ARM: imx: remove mach/dma-mx1-mx2.h Shawn Guo
2012-09-20  6:45 ` [PATCH v2 13/34] dma: ipu: rename mach/ipu.h to include/linux/dma/ipu-dma.h Shawn Guo
2012-09-20  6:45 ` [PATCH v2 14/34] dma: imx-sdma: remove unneeded mach/hardware.h inclusion Shawn Guo
2012-09-20  6:45 ` [PATCH v2 15/34] ASoC: imx-ssi: " Shawn Guo
2012-09-20  6:45 ` [PATCH v2 16/34] usb: ehci-mxc: " Shawn Guo
2012-09-20  6:45 ` [PATCH v2 17/34] video: mx3fb: " Shawn Guo
2012-09-20  6:45 ` [PATCH v2 18/34] watchdog: imx2_wdt: " Shawn Guo
2012-09-20  6:45 ` [PATCH v2 19/34] i2c: imx: remove cpu_is_xxx by using platform_device_id Shawn Guo
2012-09-20  6:45 ` [PATCH v2 20/34] mtd: mxc_nand: " Shawn Guo
2012-09-20  6:45 ` [PATCH v2 21/34] rtc: mxc_rtc: " Shawn Guo
2012-09-20  6:45 ` [PATCH v2 22/34] dma: imx-dma: use devm_kzalloc and devm_request_irq Shawn Guo
2012-09-20  6:45 ` [PATCH v2 23/34] dma: imx-dma: retrieve MEM and IRQ from resources Shawn Guo
2012-09-20  6:45 ` [PATCH v2 24/34] dma: imx-dma: remove cpu_is_xxx by using platform_device_id Shawn Guo
2012-09-20  6:45 ` [PATCH v2 25/34] media: mx2_camera: remove dead code in mx2_camera_add_device Shawn Guo
2012-09-20  6:45 ` [PATCH v2 26/34] media: mx2_camera: use managed functions to clean up code Shawn Guo
2012-09-20  6:45 ` [PATCH v2 27/34] media: mx2_camera: remove cpu_is_xxx by using platform_device_id Shawn Guo
2012-09-27 19:03   ` Mauro Carvalho Chehab
2012-10-06  8:26     ` Shawn Guo
2012-10-06 14:39       ` Mauro Carvalho Chehab
2012-09-20  6:45 ` [PATCH v2 28/34] mmc: mxcmmc: " Shawn Guo
2012-09-20  6:45 ` [PATCH v2 29/34] video: imxfb: " Shawn Guo
2012-09-20  6:45 ` [PATCH v2 30/34] ARM: imx: move debug macros to include/debug Shawn Guo
2012-09-20  6:45 ` [PATCH v2 31/34] ARM: imx: include hardware.h rather than mach/hardware.h Shawn Guo
2012-09-20  6:45 ` [PATCH v2 32/34] ARM: imx: remove header file mach/irqs.h Shawn Guo
2012-09-20  6:45 ` Shawn Guo [this message]
2012-09-20  6:45 ` [PATCH v2 34/34] ARM: imx: enable multi-platform build Shawn Guo
2012-09-20  7:39 ` [PATCH v2 00/34] i.MX multi-platform support Arnd Bergmann
2012-09-20 11:41   ` Mark Brown
2012-09-20 11:52     ` Shawn Guo
2012-09-20 12:47       ` Mark Brown
2012-09-20 13:36         ` Shawn Guo
2012-09-20 14:53   ` Shawn Guo
2012-09-20 15:56     ` Arnd Bergmann
2012-09-21  8:01       ` [alsa-devel] " Shawn Guo
2012-09-21  8:26         ` Olof Johansson
2012-09-21 16:46           ` Shawn Guo
2012-09-21 16:53             ` Shawn Guo
2012-09-22  7:41               ` Olof Johansson
2012-09-22  8:09                 ` Olof Johansson
2012-09-22  9:34                   ` Shawn Guo
2012-09-22 15:43           ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1348123547-31082-34-git-send-email-shawn.guo@linaro.org \
    --to=shawn.guo@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).