linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: stanhu@gmail.com (Stan Hu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/1] ARM: Add option to configure output line for McSPI driver
Date: Wed, 26 Sep 2012 11:34:27 -0700	[thread overview]
Message-ID: <1348684467-5707-1-git-send-email-stanhu@gmail.com> (raw)
In-Reply-To: <y>

McSPI driver previously assumed that D0 was input (MISO) and D1 was output (MOSI).
This forces the hardware designer to wire all SPI peripherals in this way when
it should be a software configuration option.

Signed-off-by: Stan Hu <stanhu@gmail.com>
---
 arch/arm/plat-omap/include/plat/mcspi.h |    2 ++
 drivers/spi/spi-omap2-mcspi.c           |   11 +++++++++--
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h
index a357eb2..0a6b790 100644
--- a/arch/arm/plat-omap/include/plat/mcspi.h
+++ b/arch/arm/plat-omap/include/plat/mcspi.h
@@ -18,6 +18,8 @@ struct omap2_mcspi_dev_attr {
 
 struct omap2_mcspi_device_config {
 	unsigned turbo_mode:1;
+	/* 1 -> [D0 = MOSI, D1 = MISO], otherwise vice versa */
+	unsigned d0_is_output:1;
 };
 
 #endif
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index b2fb141..1853527 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -717,6 +717,7 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
 		struct spi_transfer *t)
 {
 	struct omap2_mcspi_cs *cs = spi->controller_state;
+	struct omap2_mcspi_device_config *cd = spi->controller_data;
 	struct omap2_mcspi *mcspi;
 	struct spi_master *spi_cntrl;
 	u32 l = 0, div = 0;
@@ -742,8 +743,14 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
 	/* standard 4-wire master mode:  SCK, MOSI/out, MISO/in, nCS
 	 * REVISIT: this controller could support SPI_3WIRE mode.
 	 */
-	l &= ~(OMAP2_MCSPI_CHCONF_IS|OMAP2_MCSPI_CHCONF_DPE1);
-	l |= OMAP2_MCSPI_CHCONF_DPE0;
+	l &= ~(OMAP2_MCSPI_CHCONF_IS|
+		OMAP2_MCSPI_CHCONF_DPE0|OMAP2_MCSPI_CHCONF_DPE1);
+
+	/* set input selection for D0 and D1 */
+	if (cd->d0_is_output)
+		l |= OMAP2_MCSPI_CHCONF_IS|OMAP2_MCSPI_CHCONF_DPE1;
+	else
+		l |= OMAP2_MCSPI_CHCONF_DPE0;
 
 	/* wordlength */
 	l &= ~OMAP2_MCSPI_CHCONF_WL_MASK;
-- 
1.7.9.5

             reply	other threads:[~2012-09-26 18:34 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-26 18:34 Stan Hu [this message]
2012-10-08 20:50 ` [PATCH 1/1] ARM: Add option to configure output line for McSPI driver Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1348684467-5707-1-git-send-email-stanhu@gmail.com \
    --to=stanhu@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).