From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/2] usb: phy: add usb3 phy driver
Date: Thu, 27 Sep 2012 19:34:06 +0530 [thread overview]
Message-ID: <1348754648-8315-1-git-send-email-kishon@ti.com> (raw)
Added a driver for usb3 phy that handles the interaction between usb phy
device and dwc3 controller. Currently writing to control module register
is taken care in this driver which will be removed once the control
module driver is in place.
Changes from v1:
* Added missing clk_put()
* Remove the patches usb: dwc3: Fix gadget pullup in SS mode and
usb: phy: omap-usb3: Decrease the number of transitions to recovery. Those
are actually WA for hw issues which will be fixed in ES2.
* Removed the *has960mhzclk* property
This patch series was rebased on
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git xceiv
However the dependent modules are not yet upstreamed and hence only compile
tested in this tree
Kishon Vijay Abraham I (2):
usb: phy: add a new driver for usb3 phy
usb: phy: omap-usb2: enable 960Mhz clock for omap5
Documentation/devicetree/bindings/usb/usb-phy.txt | 18 +
drivers/usb/phy/Kconfig | 9 +
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/omap-usb2.c | 18 +-
drivers/usb/phy/omap-usb3.c | 412 +++++++++++++++++++++
include/linux/usb/omap_usb.h | 33 ++
6 files changed, 489 insertions(+), 2 deletions(-)
create mode 100644 drivers/usb/phy/omap-usb3.c
--
1.7.9.5
next reply other threads:[~2012-09-27 14:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-27 14:04 Kishon Vijay Abraham I [this message]
2012-09-27 14:04 ` [PATCH v2 1/2] usb: phy: add a new driver for usb3 phy Kishon Vijay Abraham I
2012-09-27 14:18 ` Russell King - ARM Linux
2012-09-28 9:40 ` ABRAHAM, KISHON VIJAY
2012-09-27 14:04 ` [PATCH v2 2/2] usb: phy: omap-usb2: enable 960Mhz clock for omap5 Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348754648-8315-1-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).