From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] usb: dwc3: core: add dt support for dwc3 core
Date: Fri, 28 Sep 2012 18:23:15 +0530 [thread overview]
Message-ID: <1348836795-4783-7-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1348836795-4783-1-git-send-email-kishon@ti.com>
Added dwc3 support for dwc3 core and update the documentation with
device tree binding information.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
Documentation/devicetree/bindings/usb/dwc3.txt | 24 ++++++++++++++++++++++++
drivers/usb/dwc3/core.c | 14 ++++++++++++--
2 files changed, 36 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/dwc3.txt
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
new file mode 100644
index 0000000..87d5eeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -0,0 +1,24 @@
+SYNOPSIS DWC3 CORE
+
+DWC3- USB3 CONTROLLER
+
+Required properties:
+ - compatible: Should be "synopsis,dwc3"
+ - reg : Address and length of the register set for the device
+ - interrupts: Interrupts used by the dwc3 controller.
+ - interrupt-parent: the phandle for the interrupt controller that
+ services interrupts for this device.
+
+Optional properties:
+ - tx-fifo-resize: determines if the fifo spaces can be reallocated according
+ to use-cases.
+
+This is usually a subnode to DWC3 glue to which it is connected.
+
+dwc3 at 4a030000 {
+ compatible = "synopsis,dwc3";
+ reg = <0x4a030000 0xcfff>;
+ interrupts = <0 92 4>
+ interrupt-parent = <&gic>
+ tx-fifo-resize;
+};
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 08a5738..0c17a7a 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -484,8 +484,7 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
else
dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
- if (of_get_property(node, "tx-fifo-resize", NULL))
- dwc->needs_fifo_resize = true;
+ dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
@@ -602,11 +601,22 @@ static int __devexit dwc3_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id of_dwc3_matach[] = {
+ {
+ .compatible = "synopsis,dwc3"
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_matach);
+#endif
+
static struct platform_driver dwc3_driver = {
.probe = dwc3_probe,
.remove = __devexit_p(dwc3_remove),
.driver = {
.name = "dwc3",
+ .of_match_table = of_match_ptr(of_dwc3_matach),
},
};
--
1.7.10.4
next prev parent reply other threads:[~2012-09-28 12:53 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-28 12:53 [PATCH 0/6] usb: dwc3-omap: add dt support Kishon Vijay Abraham I
2012-09-28 12:53 ` [PATCH 1/6] usb: dwc3-omap: use of_platform API to create dwc3 core pdev Kishon Vijay Abraham I
2012-09-28 12:57 ` Felipe Balbi
2012-09-28 13:31 ` ABRAHAM, KISHON VIJAY
2012-10-01 8:50 ` Felipe Balbi
2012-09-28 12:53 ` [PATCH 2/6] usb: dwc3-omap: use runtime API's to enable clocks Kishon Vijay Abraham I
2012-09-28 12:58 ` Felipe Balbi
2012-09-28 13:31 ` ABRAHAM, KISHON VIJAY
2012-09-28 12:53 ` [PATCH 3/6] usb: dwc3-omap: Remove explicit writes to SYSCONFIG register Kishon Vijay Abraham I
2012-09-28 12:53 ` [PATCH 4/6] usb: dwc3-omap: Add an API to write to dwc mailbox Kishon Vijay Abraham I
2012-09-28 12:59 ` Felipe Balbi
2012-09-28 13:31 ` ABRAHAM, KISHON VIJAY
2012-09-28 12:53 ` [PATCH 5/6] usb: dwc3-omap: Minor fixes to get dt working Kishon Vijay Abraham I
2012-09-28 12:53 ` Kishon Vijay Abraham I [this message]
2012-09-28 13:02 ` [PATCH 6/6] usb: dwc3: core: add dt support for dwc3 core Felipe Balbi
2012-09-28 13:32 ` ABRAHAM, KISHON VIJAY
2012-09-30 16:47 ` Sergei Shtylyov
2012-10-01 5:10 ` ABRAHAM, KISHON VIJAY
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348836795-4783-7-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).