From: t.figa@samsung.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 14/16] ARM: dts: exynos4210: Remove legacy gpio nodes
Date: Fri, 28 Sep 2012 16:28:45 +0200 [thread overview]
Message-ID: <1348842527-22460-15-git-send-email-t.figa@samsung.com> (raw)
In-Reply-To: <1348842527-22460-1-git-send-email-t.figa@samsung.com>
This patch removes the legacy gpio nodes as the gpio driver is going to
be replaced with the new pinctrl driver.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
---
arch/arm/boot/dts/exynos4210.dtsi | 229 --------------------------------------
1 file changed, 229 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index a4bd0c9..ecbc707 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -250,233 +250,4 @@
interrupts = <0 36 0>;
};
};
-
- gpio-controllers {
- #address-cells = <1>;
- #size-cells = <1>;
- gpio-controller;
- ranges;
-
- gpa0: gpio-controller at 11400000 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400000 0x20>;
- #gpio-cells = <4>;
- };
-
- gpa1: gpio-controller at 11400020 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400020 0x20>;
- #gpio-cells = <4>;
- };
-
- gpb: gpio-controller at 11400040 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400040 0x20>;
- #gpio-cells = <4>;
- };
-
- gpc0: gpio-controller at 11400060 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400060 0x20>;
- #gpio-cells = <4>;
- };
-
- gpc1: gpio-controller at 11400080 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400080 0x20>;
- #gpio-cells = <4>;
- };
-
- gpd0: gpio-controller at 114000A0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114000A0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpd1: gpio-controller at 114000C0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114000C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpe0: gpio-controller at 114000E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114000E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpe1: gpio-controller at 11400100 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400100 0x20>;
- #gpio-cells = <4>;
- };
-
- gpe2: gpio-controller at 11400120 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400120 0x20>;
- #gpio-cells = <4>;
- };
-
- gpe3: gpio-controller at 11400140 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400140 0x20>;
- #gpio-cells = <4>;
- };
-
- gpe4: gpio-controller at 11400160 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400160 0x20>;
- #gpio-cells = <4>;
- };
-
- gpf0: gpio-controller at 11400180 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400180 0x20>;
- #gpio-cells = <4>;
- };
-
- gpf1: gpio-controller at 114001A0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114001A0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpf2: gpio-controller at 114001C0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114001C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpf3: gpio-controller at 114001E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114001E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpj0: gpio-controller at 11000000 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000000 0x20>;
- #gpio-cells = <4>;
- };
-
- gpj1: gpio-controller at 11000020 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000020 0x20>;
- #gpio-cells = <4>;
- };
-
- gpk0: gpio-controller at 11000040 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000040 0x20>;
- #gpio-cells = <4>;
- };
-
- gpk1: gpio-controller at 11000060 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000060 0x20>;
- #gpio-cells = <4>;
- };
-
- gpk2: gpio-controller at 11000080 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000080 0x20>;
- #gpio-cells = <4>;
- };
-
- gpk3: gpio-controller at 110000A0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x110000A0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpl0: gpio-controller at 110000C0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x110000C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpl1: gpio-controller at 110000E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x110000E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpl2: gpio-controller at 11000100 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000100 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy0: gpio-controller at 11000120 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000120 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy1: gpio-controller at 11000140 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000140 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy2: gpio-controller at 11000160 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000160 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy3: gpio-controller at 11000180 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000180 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy4: gpio-controller at 110001A0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x110001A0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy5: gpio-controller at 110001C0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x110001C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy6: gpio-controller at 110001E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x110001E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx0: gpio-controller at 11000C00 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000C00 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx1: gpio-controller at 11000C20 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000C20 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx2: gpio-controller at 11000C40 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000C40 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx3: gpio-controller at 11000C60 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11000C60 0x20>;
- #gpio-cells = <4>;
- };
-
- gpz: gpio-controller at 03860000 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x03860000 0x20>;
- #gpio-cells = <4>;
- };
- };
};
--
1.7.12
next prev parent reply other threads:[~2012-09-28 14:28 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-28 14:28 [RFC PATCH 00/16] pinctrl: samsung: Usability and extensibiltiy improvements Tomasz Figa
2012-09-28 14:28 ` [RFC PATCH 01/16] pinctrl: exynos: Parse wakeup-eint parameters from DT Tomasz Figa
2012-09-28 14:28 ` [RFC PATCH 02/16] pinctrl: samsung: Detect and handle unsupported configuration types Tomasz Figa
2012-09-28 14:28 ` [RFC PATCH 03/16] pinctrl: samsung: Parse pin banks from DT Tomasz Figa
2012-09-28 14:28 ` [RFC PATCH 04/16] pinctrl: exynos: Remove static platform-specific data Tomasz Figa
2012-09-28 14:28 ` [RFC PATCH 05/16] pinctrl: samsung: Parse bank-specific eint offset from DT Tomasz Figa
2012-09-28 14:28 ` [RFC PATCH 06/16] pinctrl: samsung: Hold OF node of pin bank in bank struct Tomasz Figa
2012-09-28 14:28 ` [RFC PATCH 07/16] pinctrl: samsung: Hold pointer to driver data " Tomasz Figa
2012-09-28 14:28 ` [RFC PATCH 08/16] pinctrl: exynos: Use one IRQ domain per pin bank Tomasz Figa
2012-09-28 14:28 ` [RFC PATCH 09/16] pinctrl: samsung: Do not pass gpio_chip to pin_to_reg_bank Tomasz Figa
2012-09-28 14:28 ` [RFC PATCH 10/16] pinctrl: samsung: Use one GPIO chip per pin bank Tomasz Figa
2012-09-28 14:28 ` [RFC PATCH 11/16] pinctrl: samsung: Use per-bank IRQ domain for wake-up interrupts Tomasz Figa
2012-09-28 14:28 ` [RFC PATCH 12/16] pinctrl: exynos: Set pin function to EINT in irq_set_type of wake-up EINT Tomasz Figa
2012-09-28 14:28 ` [RFC PATCH 13/16] pinctrl: samsung: Parse offsets of particular registers from DT Tomasz Figa
2012-09-28 14:28 ` Tomasz Figa [this message]
2012-09-28 14:28 ` [RFC PATCH 15/16] ARM: dts: exynos4210: Add platform-specific descriptions for pin controllers Tomasz Figa
2012-09-28 14:28 ` [RFC PATCH 16/16] Documentation: Update samsung-pinctrl device tree bindings documentation Tomasz Figa
2012-10-04 19:23 ` Stephen Warren
2012-10-01 6:58 ` [RFC PATCH 00/16] pinctrl: samsung: Usability and extensibiltiy improvements Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348842527-22460-15-git-send-email-t.figa@samsung.com \
--to=t.figa@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox