From: const@MakeLinux.com (Constantine Shulyupin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4] Enable USB peripheral on dm365 EVM
Date: Thu, 4 Oct 2012 18:22:33 +0200 [thread overview]
Message-ID: <1349367753-6725-1-git-send-email-const@MakeLinux.com> (raw)
From: Constantine Shulyupin <const@MakeLinux.com>
Signed-off-by: Constantine Shulyupin <const@MakeLinux.com>
---
Note:
USBPHY_CTL_PADDR and USBPHY_CLKFREQ_24MHZ are defined in board-dm365-evm.c because davinci.h can't be included from drivers/usb/musb/. May be davinci.h should be renamed and moved to arch/arm/mach-davinci/include/mach/usb.h like arch/arm/plat-omap/include/plat/usb.h
Tested with usb gadget g_zero.
Changelog
Changes since v3 http://www.spinics.net/lists/kernel/msg1412544.html:
- removed optional altering of pr_info
Changes since v2 http://article.gmane.org/gmane.linux.kernel/1159868/
- reordered code
- removed alternation of GPIO33, which is multiplexed with DRVVBUS, because is not need for peripheral USB
Changes since v1 http://marc.info/?l=linux-kernel&m=130894150803661&w=2:
- removed optional code and reordered
This patch is based on code from Arago, Angstom, and RidgeRun projects.
Original patch by miguel.aguilar at ridgerun.com is three years ago:
- http://www.mail-archive.com/davinci-linux-open-source at linux.davincidsp.com/msg14741.html
---
arch/arm/mach-davinci/board-dm365-evm.c | 8 ++++++++
arch/arm/mach-davinci/usb.c | 2 ++
drivers/usb/musb/davinci.h | 1 +
drivers/usb/musb/musb_core.c | 20 ++++++++++++--------
4 files changed, 23 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 3a4743b..dfcb67f 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -38,6 +38,8 @@
#include <mach/mmc.h>
#include <mach/nand.h>
#include <mach/keyscan.h>
+#include <mach/usb.h>
+#include <mach/hardware.h>
#include <media/tvp514x.h>
@@ -92,6 +94,9 @@ static inline int have_tvp7002(void)
#define CPLD_CCD_DIR3 CPLD_OFFSET(0x3f,0)
#define CPLD_CCD_IO3 CPLD_OFFSET(0x3f,1)
+#define USBPHY_CTL_PADDR 0x01c40034
+#define USBPHY_CLKFREQ_24MHZ BIT(13)
+
static void __iomem *cpld;
@@ -613,6 +618,9 @@ static __init void dm365_evm_init(void)
dm365_init_spi0(BIT(0), dm365_evm_spi_info,
ARRAY_SIZE(dm365_evm_spi_info));
+ writel(readl(IO_ADDRESS(USBPHY_CTL_PADDR)) | USBPHY_CLKFREQ_24MHZ,
+ IO_ADDRESS(USBPHY_CTL_PADDR));
+ davinci_setup_usb(500, 8);
}
MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 23d2b6d..664c689 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -49,6 +49,8 @@ static struct musb_hdrc_platform_data usb_data = {
.mode = MUSB_PERIPHERAL,
#elif defined(CONFIG_USB_MUSB_HOST)
.mode = MUSB_HOST,
+#else
+ .mode = MUSB_OTG,
#endif
.clock = "usb",
.config = &musb_config,
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
index 371baa0..e737d97 100644
--- a/drivers/usb/musb/davinci.h
+++ b/drivers/usb/musb/davinci.h
@@ -16,6 +16,7 @@
/* Integrated highspeed/otg PHY */
#define USBPHY_CTL_PADDR 0x01c40034
+#define USBPHY_CLKFREQ_24MHZ BIT(13)
#define USBPHY_DATAPOL BIT(11) /* (dm355) switch D+/D- */
#define USBPHY_PHYCLKGD BIT(8)
#define USBPHY_SESNDEN BIT(7) /* v(sess_end) comparator */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 26f1bef..277fe65 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2051,9 +2051,17 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
({char *s;
switch (musb->board_mode) {
- case MUSB_HOST: s = "Host"; break;
- case MUSB_PERIPHERAL: s = "Peripheral"; break;
- default: s = "OTG"; break;
+ case MUSB_HOST:
+ s = "Host";
+ break;
+ case MUSB_PERIPHERAL:
+ s = "Peripheral";
+ break;
+ case MUSB_OTG:
+ s = "OTG";
+ break;
+ default:
+ s = "Undefined";
}; s; }),
ctrl,
(is_dma_capable() && musb->dma_controller)
--
1.7.9.5
next reply other threads:[~2012-10-04 16:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-04 16:22 Constantine Shulyupin [this message]
2012-10-04 17:21 ` [PATCH v4] Enable USB peripheral on dm365 EVM Greg KH
2012-10-08 11:41 ` Sekhar Nori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349367753-6725-1-git-send-email-const@MakeLinux.com \
--to=const@makelinux.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).