From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Fri, 5 Oct 2012 16:31:45 +0100 Subject: [PATCH 09/10] ARM: ux500: Apply a Device Tree node for the STMPE MFD In-Reply-To: <1349451107-8009-1-git-send-email-lee.jones@linaro.org> References: <1349451107-8009-1-git-send-email-lee.jones@linaro.org> Message-ID: <1349451107-8009-10-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Here we apply the STMPE Multi-Functional Device's node to the ST User Interface Board Device Tree file. It includes all of the properties required for correct device initialsation. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/stuib.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi index 62f3ecd..b25663c 100644 --- a/arch/arm/boot/dts/stuib.dtsi +++ b/arch/arm/boot/dts/stuib.dtsi @@ -11,6 +11,19 @@ / { soc-u9500 { + i2c at 80004000 { + stmpe1601: stmpe1601 at 40 { + compatible = "st,stmpe1601"; + reg = <0x40>; + interrupts = <26 0x4>; + interrupt-parent = <&gpio6>; + interrupt-controller; + + i2c-client-wake; + st,autosleep-timeout = <1024>; + }; + }; + i2c at 80110000 { bu21013_tp at 0x5c { compatible = "rhom,bu21013_tp"; -- 1.7.9.5