From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Fri, 5 Oct 2012 16:31:46 +0100 Subject: [PATCH 10/10] ARM: ux500: Supply the STMPE keypad Device Tree node to the STUIB DT In-Reply-To: <1349451107-8009-1-git-send-email-lee.jones@linaro.org> References: <1349451107-8009-1-git-send-email-lee.jones@linaro.org> Message-ID: <1349451107-8009-11-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch allows the STMPE keypad driver to be successfully probed and initialised during a Device Tree enabled boot sequence. It contains all of the required properties needed to setup and map each key on the 6x3 keypad located on the ST User Interface Board. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/stuib.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi index b25663c..b492e3e 100644 --- a/arch/arm/boot/dts/stuib.dtsi +++ b/arch/arm/boot/dts/stuib.dtsi @@ -21,6 +21,33 @@ i2c-client-wake; st,autosleep-timeout = <1024>; + + stmpe_keypad { + compatible = "st,stmpe-keypad"; + + debounce-interval = <64>; + stericsson,scan-count = <8>; + stericsson,no-autorepeat; + + linux,keymap = <0x205006b + 0x4010074 + 0x3050072 + 0x1030004 + 0x502006a + 0x500000a + 0x5008b + 0x706001c + 0x405000b + 0x6070003 + 0x3040067 + 0x303006c + 0x60400e7 + 0x602009e + 0x4020073 + 0x5050002 + 0x4030069 + 0x3020008>; + }; }; }; -- 1.7.9.5