From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Fri, 5 Oct 2012 16:31:39 +0100 Subject: [PATCH 03/10] mfd: Correct copy and paste mistake in stmpe In-Reply-To: <1349451107-8009-1-git-send-email-lee.jones@linaro.org> References: <1349451107-8009-1-git-send-email-lee.jones@linaro.org> Message-ID: <1349451107-8009-4-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org When specifying IRQ numbers for the stmpe1601, IRQ defines for the stmpe24xx were used instead. Fortunately, the defined numbers are the same, hence why it survived testing. This fix is merely an aesthetic one. Cc: Samuel Ortiz Acked-by: Linus Walleij Signed-off-by: Lee Jones --- drivers/mfd/stmpe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 5c8d8f2..e50ebdf 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -519,12 +519,12 @@ static const u8 stmpe1601_regs[] = { static struct stmpe_variant_block stmpe1601_blocks[] = { { .cell = &stmpe_gpio_cell, - .irq = STMPE24XX_IRQ_GPIOC, + .irq = STMPE1601_IRQ_GPIOC, .block = STMPE_BLOCK_GPIO, }, { .cell = &stmpe_keypad_cell, - .irq = STMPE24XX_IRQ_KEYPAD, + .irq = STMPE1601_IRQ_KEYPAD, .block = STMPE_BLOCK_KEYPAD, }, }; -- 1.7.9.5