linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: shc_work@mail.ru (Alexander Shiyan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/7] ARM: clps711x: convert to clockevents
Date: Wed, 10 Oct 2012 19:45:27 +0400	[thread overview]
Message-ID: <1349883933-8881-1-git-send-email-shc_work@mail.ru> (raw)

This patch converts CLPS711X-platform to use modern clockevent API.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/Kconfig                |    2 +-
 arch/arm/mach-clps711x/common.c |   38 +++++++++++++++++---------------------
 2 files changed, 18 insertions(+), 22 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3ebe71c..1d43127 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -354,9 +354,9 @@ config ARCH_BCM2835
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select CPU_ARM720T
-	select ARCH_USES_GETTIMEOFFSET
 	select COMMON_CLK
 	select CLKDEV_LOOKUP
+	select GENERIC_CLOCKEVENTS
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for Cirrus Logic 711x/721x/731x based boards.
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index 509243d..218684f 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -21,13 +21,14 @@
  */
 #include <linux/io.h>
 #include <linux/init.h>
+#include <linux/sizes.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/clockchips.h>
 #include <linux/clk-provider.h>
 
-#include <asm/sizes.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
@@ -36,7 +37,6 @@
 
 static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh,
 		  *clk_tint, *clk_spi;
-static unsigned long latch;
 
 /*
  * This maps the generic CLPS711x registers
@@ -158,32 +158,29 @@ void __init clps711x_init_irq(void)
 	clps_writel(0, KBDEOI);
 }
 
-/*
- * gettimeoffset() returns time since last timer tick, in usecs.
- *
- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- * 'tick' is usecs per jiffy.
- */
-static unsigned long clps711x_gettimeoffset(void)
+static void clps711x_clockevent_set_mode(enum clock_event_mode mode,
+					 struct clock_event_device *evt)
 {
-	unsigned long hwticks;
-	hwticks = latch - (clps_readl(TC2D) & 0xffff);
-	return (hwticks * (tick_nsec / 1000)) / latch;
 }
 
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id)
+static struct clock_event_device clockevent_clps711x = {
+	.name		= "CLPS711x Clockevents",
+	.rating		= 300,
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.set_mode	= clps711x_clockevent_set_mode,
+};
+
+static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id)
 {
-	timer_tick();
+	clockevent_clps711x.event_handler(&clockevent_clps711x);
+
 	return IRQ_HANDLED;
 }
 
 static struct irqaction clps711x_timer_irq = {
 	.name		= "CLPS711x Timer Tick",
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= p720t_timer_interrupt,
+	.handler	= clps711x_timer_interrupt,
 };
 
 static void add_fixed_clk(struct clk *clk, const char *name, int rate)
@@ -244,20 +241,19 @@ static void __init clps711x_timer_init(void)
 
 	pr_info("CPU frequency set at %i Hz.\n", cpu);
 
-	latch = (timh + HZ / 2) / HZ;
+	clps_writew(DIV_ROUND_CLOSEST(timh, HZ), TC2D);
 
 	tmp = clps_readl(SYSCON1);
 	tmp |= SYSCON1_TC2S | SYSCON1_TC2M;
 	clps_writel(tmp, SYSCON1);
 
-	clps_writel(latch - 1, TC2D);
+	clockevents_config_and_register(&clockevent_clps711x, timh, 1, 0xffff);
 
 	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
 }
 
 struct sys_timer clps711x_timer = {
 	.init		= clps711x_timer_init,
-	.offset		= clps711x_gettimeoffset,
 };
 
 void clps711x_restart(char mode, const char *cmd)
-- 
1.7.8.6

             reply	other threads:[~2012-10-10 15:45 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-10 15:45 Alexander Shiyan [this message]
2012-10-10 15:45 ` [PATCH 2/7] ARM: clps711x: p720t: remove missing #include Alexander Shiyan
2012-10-10 15:45 ` [PATCH 3/7] ARM: clps711x: rework IRQ sybsustem initialization Alexander Shiyan
2012-10-10 15:45 ` [PATCH 4/7] ARM: clps711x: added missing definitions Alexander Shiyan
2012-10-10 15:45 ` [PATCH 5/7] ARM: clps711x: make all virtual addresses definition via one macro Alexander Shiyan
2012-10-10 18:25   ` Arnd Bergmann
2012-10-11 14:24     ` Alexander Shiyan
2012-10-10 15:45 ` [PATCH 6/7] ARM: clps711x: merge all CLPS711X-defconfigs into one Alexander Shiyan
2012-10-10 15:45 ` [PATCH 7/7] ARM: clps711x: merge files related to EDB7211-board " Alexander Shiyan
2012-10-10 18:30 ` [PATCH 1/7] ARM: clps711x: convert to clockevents Arnd Bergmann
2012-10-25 15:30 ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1349883933-8881-1-git-send-email-shc_work@mail.ru \
    --to=shc_work@mail.ru \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).