From: haojian.zhuang@gmail.com (Haojian Zhuang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/10] ARM: dts: support pinctrl single in pxa910
Date: Thu, 18 Oct 2012 17:07:03 +0800 [thread overview]
Message-ID: <1350551224-12857-9-git-send-email-haojian.zhuang@gmail.com> (raw)
In-Reply-To: <1350551224-12857-1-git-send-email-haojian.zhuang@gmail.com>
Add pinctrl-single support with device tree in pxa910 dkb platform.
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
---
arch/arm/boot/dts/pxa910-dkb.dts | 187 +++++++++++++++++++++++++++++++++++++-
arch/arm/boot/dts/pxa910.dtsi | 81 ++++++++++++++++
2 files changed, 267 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts
index e92be5a..2ad0a98 100644
--- a/arch/arm/boot/dts/pxa910-dkb.dts
+++ b/arch/arm/boot/dts/pxa910-dkb.dts
@@ -24,10 +24,195 @@
soc {
apb at d4000000 {
- uart1: uart at d4017000 {
+ pmx: pinmux at d401e000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&board_pins>;
+
+ board_pins: pinmux_board_pins {
+ /* pins not owned by device driver */
+ };
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ 0x198 0x6 /* GPIO47_UART1_RXD */
+ 0x19c 0x6 /* GPIO48_UART1_TXD */
+ >;
+ pinctrl-single,power-source = <0x2>;
+ pinctrl-single,bias = <0x6>;
+ };
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ 0x150 0x4 /* GPIO29_UART2_CTS */
+ 0x154 0x4 /* GPIO30_UART2_RTS */
+ 0x158 0x4 /* GPIO31_UART2_TXD */
+ 0x15c 0x4 /* GPIO32_UART2_RXD */
+ >;
+ pinctrl-single,power-source = <0x2>;
+ pinctrl-single,bias = <0>;
+ };
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ 0x188 0x7 /* GPIO43_UART3_RXD */
+ 0x18c 0x7 /* GPIO44_UART3_TXD */
+ >;
+ pinctrl-single,power-source = <0x2>;
+ pinctrl-single,bias = <0>;
+ };
+ twsi1_pins: pinmux_twsi1_pins {
+ pinctrl-single,pins = <
+ 0x1b0 0x2 /* GPIO53_TWSI_SCL */
+ 0x1b4 0x2 /* GPIO54_TWSI_SDA */
+ >;
+ pinctrl-single,power-source = <0x2>;
+ pinctrl-single,bias = <0>;
+ };
+ nand_pins: pinmux_nand_pins {
+ pinctrl-single,pins = <
+ 0x040 0x0 /* ND_IO0 */
+ 0x03c 0x0 /* ND_IO1 */
+ 0x038 0x0 /* ND_IO2 */
+ 0x034 0x0 /* ND_IO3 */
+ 0x030 0x0 /* ND_IO4 */
+ 0x02c 0x0 /* ND_IO5 */
+ 0x028 0x0 /* ND_IO6 */
+ 0x024 0x0 /* ND_IO7 */
+ 0x020 0x0 /* ND_IO8 */
+ 0x01c 0x0 /* ND_IO9 */
+ 0x018 0x0 /* ND_IO10 */
+ 0x014 0x0 /* ND_IO11 */
+ 0x010 0x0 /* ND_IO12 */
+ 0x00c 0x0 /* ND_IO13 */
+ 0x008 0x0 /* ND_IO14 */
+ 0x004 0x0 /* ND_IO15 */
+ 0x044 0x0 /* ND_nCS0 */
+ 0x060 0x1 /* ND_ALE */
+ 0x05c 0x0 /* ND_CLE */
+ 0x054 0x1 /* ND_nWE */
+ 0x058 0x1 /* ND_nRE */
+ 0x068 0x0 /* ND_RDY0 */
+ >;
+ pinctrl-single,power-source = <0x2>;
+ pinctrl-single,bias = <0>;
+ };
+ mmc1_ldata_pins: pinmux_mmc1_ldata_pins {
+ pinctrl-single,pins = <
+ 0x0a0 0x0 /* MMC1_DATA0 */
+ 0x09c 0x0 /* MMC1_DATA1 */
+ 0x098 0x0 /* MMC1_DATA2 */
+ 0x094 0x0 /* MMC1_DATA3 */
+ >;
+ pinctrl-single,power-source = <0x3>;
+ pinctrl-single,bias = <0>;
+ };
+ mmc1_hdata_pins: pinmux_mmc1_hdata_pins {
+ pinctrl-single,pins = <
+ 0x090 0x0 /* MMC1_DATA4 */
+ 0x08c 0x0 /* MMC1_DATA5 */
+ 0x088 0x0 /* MMC1_DATA6 */
+ 0x084 0x0 /* MMC1_DATA7 */
+ >;
+ pinctrl-single,power-source = <0x2>;
+ pinctrl-single,bias = <0>;
+ };
+ mmc1_clk_pins: pinmux_mmc1_clk_pins {
+ pinctrl-single,pins = <
+ 0x0a4 0x0 /* MMC1_CMD */
+ 0x0a8 0x0 /* MMC1_CLK */
+ >;
+ pinctrl-single,power-source = <0x3>;
+ pinctrl-single,bias = <0>;
+ };
+ mmc1_cd_pins: pinmux_mmc1_cd_pins {
+ pinctrl-single,pins = <
+ 0x0ac 0x0 /* MMC1_CD */
+ 0x0b0 0x0 /* MMC1_WP */
+ >;
+ pinctrl-single,power-source = <0x2>;
+ pinctrl-single,bias = <0>;
+ };
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ 0x180 0x1 /* MMC2_CMD */
+ 0x184 0x1 /* MMC2_CLK */
+ 0x17c 0x1 /* MMC2_DATA0 */
+ 0x178 0x1 /* MMC2_DATA1 */
+ 0x174 0x1 /* MMC2_DATA2 */
+ 0x170 0x1 /* MMC2_DATA3 */
+ >;
+ pinctrl-single,power-source = <0x2>;
+ pinctrl-single,bias = <0>;
+ };
+ w1_pins: pinmux_w1_pins {
+ pinctrl-single,pins = <
+ 0x0cc 0x2 /* CLK_REQ_W1 */
+ >;
+ pinctrl-single,power-source = <0x2>;
+ pinctrl-single,bias = <0>;
+ };
+ ssp1_pins: pinmux_ssp1_pins {
+ pinctrl-single,pins = <
+ 0x130 0x1 /* GPIO21_SSP1_SCLK */
+ 0x134 0x1 /* GPIO22_SSP1_FRM */
+ 0x138 0x1 /* GPIO23_SSP1_TXD */
+ 0x13c 0x1 /* GPIO24_SSP1_RXD */
+ >;
+ pinctrl-single,power-source = <0x2>;
+ pinctrl-single,bias = <0>;
+ };
+ keypad_pins: pinmux_keypad_pins {
+ pinctrl-single,pins = <
+ 0x0dc 0x1 /* GPIO0_MKIN0 */
+ 0x0e0 0x1 /* GPIO1_MKOUT0 */
+ 0x0e4 0x1 /* GPIO2_MKIN1 */
+ 0x0e8 0x1 /* GPIO3_MKOUT1 */
+ 0x0ec 0x1 /* GPIO4_MKIN2 */
+ 0x0f0 0x1 /* GPIO5_MKOUT2 */
+ 0x0f4 0x1 /* GPIO6_MKIN3 */
+ 0x0f8 0x1 /* GPIO7_MKOUT3 */
+ 0x0fc 0x1 /* GPIO8_MKIN4 */
+ 0x100 0x1 /* GPIO9_MKOUT4 */
+ 0x10c 0x1 /* GPIO12_MKIN6 */
+ >;
+ pinctrl-single,power-source = <0x2>;
+ pinctrl-single,bias = <0>;
+ };
+ nfc_pins: pinmux_nfc_pins {
+ pinctrl-single,pins = <
+ 0x120 0x0 /* GPIO17 */
+ >;
+ pinctrl-single,power-source = <0x2>;
+ pinctrl-single,bias = <0>;
+ };
+ wlan_pins: pinmux_wlan_pins {
+ pinctrl-single,pins = <
+ 0x114 0x0 /* GPIO14 */
+ 0x12c 0x0 /* GPIO20 */
+ 0x160 0x0 /* GPIO33 */
+ 0x164 0x0 /* GPIO34 */
+ 0x168 0x0 /* GPIO35 */
+ 0x16c 0x0 /* GPIO36 */
+ >;
+ pinctrl-single,power-source = <0x2>;
+ pinctrl-single,bias = <0>;
+ };
+ };
+ uart1: uart at d4017000 { /* FFUART */
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+ };
+ uart2: uart at d4018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+ };
+ uart3: uart at d4036000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
status = "okay";
};
twsi1: i2c at d4011000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&twsi1_pins>;
status = "okay";
};
rtc: rtc at d4010000 {
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
index aebf32d..d3f5205 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -49,6 +49,87 @@
reg = <0xd4000000 0x00200000>;
ranges;
+ pmx: pinmux at d401e000 {
+ compatible = "pinctrl-single";
+ reg = <0xd401e000 0x0330>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <7>;
+ pinctrl-single,gpio-mask = <7>;
+ pinctrl-single,gpio-ranges = <&gpiorange0 &gpiorange1
+ &gpiorange2 &gpiorange3
+ &gpiorange4 &gpiorange5
+ &gpiorange6 &gpiorange7
+ &gpiorange8 &gpiorange9
+ &gpiorange10>;
+ pinctrl-single,power-source-mask = <0x1800>;
+ pinctrl-single,power-source-shift = <11>;
+ pinctrl-single,bias-mask = <0xe000>;
+ pinctrl-single,bias-shift = <13>;
+ pinctrl-single,bias-disable = <0>;
+ pinctrl-single,bias-pull-down = <0xa000>;
+ pinctrl-single,bias-pull-up = <0xc000>;
+ pinctrl-single,input-schmitt-mask = <0x70>;
+ pinctrl-single,input-schmitt-shift = <4>;
+
+ gpiorange0: gpiorange at d401e0dc {
+ /* GPIO0 ~ GPIO54 */
+ pinctrl-single,gpio = <0 55 0x0dc>;
+ pinctrl-single,gpio-enable = <0x0dc 0>;
+ };
+ gpiorange1: gpiorange at d401e2f0 {
+ /* GPIO55 ~ GPIO59 */
+ pinctrl-single,gpio = <55 5 0x2f0>;
+ pinctrl-single,gpio-enable = <0x2f0 1>;
+ };
+ gpiorange2: gpiorange at d401e304 {
+ /* GPIO60 ~ GPIO66 */
+ pinctrl-single,gpio = <60 7 0x304>;
+ pinctrl-single,gpio-enable = <0x304 0>;
+ };
+ gpiorange3: gpiorange at d401e1b8 {
+ /* GPIO67 ~ GPIO109 */
+ pinctrl-single,gpio = <67 43 0x1b8>;
+ pinctrl-single,gpio-enable = <0x1b8 0>;
+ };
+ gpiorange4: gpiorange at d401e298 {
+ /* GPIO110 ~ GPIO116 */
+ pinctrl-single,gpio = <110 7 0x298>;
+ pinctrl-single,gpio-enable = <0x298 0>;
+ };
+ gpiorange5: gpiorange at d401e0b4 {
+ /* GPIO117 ~ GPIO120 */
+ pinctrl-single,gpio = <117 4 0x0b4>;
+ pinctrl-single,gpio-enable = <0x0b4 1>;
+ };
+ gpiorange6: gpiorange at d401e32c {
+ /* GPIO121 */
+ pinctrl-single,gpio = <121 1 0x32c>;
+ pinctrl-single,gpio-enable = <0x32c 0>;
+ };
+ gpiorange7: gpiorange at d401e0c8 {
+ /* GPIO122 ~ GPIO123 */
+ pinctrl-single,gpio = <122 2 0x0c8>;
+ pinctrl-single,gpio-enable = <0x0c8 1>;
+ };
+ gpiorange8: gpiorange at d401e0d0 {
+ /* GPIO124 */
+ pinctrl-single,gpio = <124 1 0x0d0>;
+ pinctrl-single,gpio-enable = <0x0d0 0>;
+ };
+ gpiorange9: gpiorange at d401e0d4 {
+ /* GPIO125 */
+ pinctrl-single,gpio = <125 1 0x0d4>;
+ pinctrl-single,gpio-enable = <0x0d4 1>;
+ };
+ gpiorange10: gpiorange at d401e06c {
+ /* GPIO126 ~ GPIO127 */
+ pinctrl-single,gpio = <126 2 0x06c>;
+ pinctrl-single,gpio-enable = <0x06c 0>;
+ };
+ };
+
timer0: timer at d4014000 {
compatible = "mrvl,mmp-timer";
reg = <0xd4014000 0x100>;
--
1.7.0.4
next prev parent reply other threads:[~2012-10-18 9:07 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-18 9:06 [PATCH 01/10] pinctrl: use postcore_initcall Haojian Zhuang
2012-10-18 9:06 ` [PATCH 02/10] ARM: mmp: select pinctrl driver Haojian Zhuang
2012-10-18 9:06 ` [PATCH 03/10] tty: pxa: configure pin Haojian Zhuang
2012-10-18 18:21 ` Linus Walleij
2012-10-18 22:20 ` Stephen Warren
2012-10-22 8:45 ` Linus Walleij
2012-10-22 20:26 ` Stephen Warren
2012-10-23 9:26 ` Linus Walleij
2012-10-23 9:37 ` Mark Brown
2012-10-23 9:59 ` Linus Walleij
2012-10-23 11:58 ` Mark Brown
2012-10-24 5:43 ` Linus Walleij
2012-10-18 9:06 ` [PATCH 04/10] i2c: pxa: configure pins Haojian Zhuang
2012-10-18 18:22 ` Linus Walleij
2012-10-18 9:06 ` [PATCH 05/10] i2c: pxa: use devm_kzalloc Haojian Zhuang
2012-10-18 22:27 ` Stephen Warren
2012-10-19 1:16 ` Haojian Zhuang
2012-10-18 9:07 ` [PATCH 06/10] pinctrl: single: support gpio request and free Haojian Zhuang
2012-10-19 22:37 ` Tony Lindgren
2012-10-18 9:07 ` [PATCH 07/10] pinctrl: remove mutex lock in groups show Haojian Zhuang
2012-10-18 18:29 ` Linus Walleij
2012-10-18 22:26 ` Stephen Warren
2012-10-22 8:53 ` Linus Walleij
2012-10-18 9:07 ` [PATCH 08/10] pinctrl: single: support pinconf generic Haojian Zhuang
2012-10-18 18:30 ` Linus Walleij
2012-10-18 22:29 ` Tony Lindgren
2012-10-19 2:23 ` Haojian Zhuang
2012-10-19 2:40 ` Tony Lindgren
2012-10-19 18:44 ` Tony Lindgren
2012-10-19 18:53 ` Tony Lindgren
2012-10-19 19:13 ` Tony Lindgren
2012-10-22 10:09 ` Haojian Zhuang
2012-10-22 17:09 ` Tony Lindgren
2012-10-25 23:43 ` Tony Lindgren
2012-10-26 1:47 ` Haojian Zhuang
2012-10-26 17:29 ` Tony Lindgren
2012-10-31 22:37 ` Haojian Zhuang
2012-10-18 9:07 ` Haojian Zhuang [this message]
2012-10-18 9:07 ` [PATCH 10/10] document: devicetree: bind pinconf in pinctrl single Haojian Zhuang
2012-10-19 22:40 ` Tony Lindgren
2012-10-18 18:20 ` [PATCH 01/10] pinctrl: use postcore_initcall Linus Walleij
2012-10-18 22:18 ` Stephen Warren
2012-10-18 22:28 ` Tony Lindgren
2012-10-19 2:16 ` Haojian Zhuang
2012-10-19 2:38 ` Tony Lindgren
2012-10-19 2:53 ` Haojian Zhuang
2012-10-19 17:41 ` Tony Lindgren
2012-10-19 2:24 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350551224-12857-9-git-send-email-haojian.zhuang@gmail.com \
--to=haojian.zhuang@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).