From: linux@prisktech.co.nz (Tony Prisk)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] ARM: dts: Update board files for pwm support
Date: Fri, 19 Oct 2012 23:38:53 +1300 [thread overview]
Message-ID: <1350643135-13197-1-git-send-email-linux@prisktech.co.nz> (raw)
This patch adds pwm support to arch-vt8500 board files, and adds
the use-case of pwm-backlight.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
arch/arm/boot/dts/vt8500-bv07.dts | 8 ++++++++
arch/arm/boot/dts/vt8500.dtsi | 29 +++++++++++++++++++++++++++++
arch/arm/boot/dts/wm8505-ref.dts | 8 ++++++++
arch/arm/boot/dts/wm8505.dtsi | 29 +++++++++++++++++++++++++++++
arch/arm/boot/dts/wm8650-mid.dts | 8 ++++++++
arch/arm/boot/dts/wm8650.dtsi | 17 +++++++++++++----
6 files changed, 95 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts
index 567cf4e..3cba367 100644
--- a/arch/arm/boot/dts/vt8500-bv07.dts
+++ b/arch/arm/boot/dts/vt8500-bv07.dts
@@ -33,4 +33,12 @@
};
};
};
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <5>;
+ };
};
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index d8645e9..e196b2e 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -40,14 +40,43 @@
#address-cells = <1>;
#size-cells = <0>;
+ ref25: ref25M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
ref24: ref24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
+
+ pllb: pllb {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x204>;
+ };
+
+ clkpwm: pwm {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x348>;
+ enable-reg = <0x250>;
+ enable-bit = <14>;
+ };
};
};
+ pwm: pwm at d8220000 {
+ #pwm-cells = <2>;
+ compatible = "via,vt8500-pwm";
+ reg = <0xd8220000 0x100>;
+ clocks = <&clkpwm>;
+ };
+
timer at d8130100 {
compatible = "via,vt8500-timer";
reg = <0xd8130100 0x28>;
diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts
index fd4e248..f51c0ed 100644
--- a/arch/arm/boot/dts/wm8505-ref.dts
+++ b/arch/arm/boot/dts/wm8505-ref.dts
@@ -33,4 +33,12 @@
};
};
};
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <5>;
+ };
};
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index b459691..83c8ec5 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -54,14 +54,43 @@
#address-cells = <1>;
#size-cells = <0>;
+ ref25: ref25M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
ref24: ref24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
+
+ pllb: pllb {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x204>;
+ };
+
+ clkpwm: pwm {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x348>;
+ enable-reg = <0x250>;
+ enable-bit = <10>;
+ };
};
};
+ pwm: pwm at d8220000 {
+ #pwm-cells = <2>;
+ compatible = "via,vt8500-pwm";
+ reg = <0xd8220000 0x100>;
+ clocks = <&clkpwm>;
+ };
+
timer at d8130100 {
compatible = "via,vt8500-timer";
reg = <0xd8130100 0x28>;
diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts
index cefd938..7a05dd5 100644
--- a/arch/arm/boot/dts/wm8650-mid.dts
+++ b/arch/arm/boot/dts/wm8650-mid.dts
@@ -33,4 +33,12 @@
};
};
};
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <5>;
+ };
};
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index 83b9467..a25d240 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -75,14 +75,16 @@
reg = <0x204>;
};
- arm: arm {
+ clkpwm: pwm {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
- clocks = <&plla>;
- divisor-reg = <0x300>;
+ clocks = <&pllb>;
+ divisor-reg = <0x348>;
+ enable-reg = <0x250>;
+ enable-bit = <10>;
};
- sdhc: sdhc {
+ clksdhc: sdhc {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&pllb>;
@@ -94,6 +96,13 @@
};
};
+ pwm: pwm at d8220000 {
+ #pwm-cells = <2>;
+ compatible = "via,vt8500-pwm";
+ reg = <0xd8220000 0x100>;
+ clocks = <&clkpwm>;
+ };
+
timer at d8130100 {
compatible = "via,vt8500-timer";
reg = <0xd8130100 0x28>;
--
1.7.9.5
next reply other threads:[~2012-10-19 10:38 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-19 10:38 Tony Prisk [this message]
2012-10-19 10:38 ` [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support Tony Prisk
2012-10-22 6:34 ` Thierry Reding
2012-10-22 6:51 ` Tony Prisk
2012-10-22 7:09 ` Tony Prisk
2012-10-22 7:24 ` Thierry Reding
2012-10-22 7:36 ` Tony Prisk
2012-10-22 8:04 ` Thierry Reding
2012-10-22 8:13 ` [PATCH v2] pwm: " Tony Prisk
2012-10-22 8:40 ` Thierry Reding
2012-10-22 18:10 ` [PATCH v3] " Tony Prisk
2012-10-23 22:14 ` Thierry Reding
2012-10-24 3:46 ` Tony Prisk
2012-10-24 5:41 ` Thierry Reding
2012-10-24 17:35 ` Tony Prisk
2012-10-24 3:48 ` Tony Prisk
2012-10-23 8:41 ` [PATCH 2/3] PWM: " Tony Prisk
2012-10-23 9:22 ` Thierry Reding
2012-10-23 9:31 ` Russell King - ARM Linux
2012-10-23 9:56 ` Thierry Reding
2012-10-22 7:11 ` Thierry Reding
2012-10-22 11:50 ` Arnd Bergmann
2012-10-22 12:07 ` Thierry Reding
2012-10-22 13:52 ` Arnd Bergmann
2012-10-22 15:08 ` Thierry Reding
2012-10-22 17:49 ` Tony Prisk
2012-10-19 10:38 ` [PATCH 3/3] DOC: PWM: Adding binding document for via,vt8500-pwm Tony Prisk
2012-10-22 6:35 ` Thierry Reding
2012-10-22 6:53 ` Tony Prisk
2012-10-19 22:37 ` [PATCH 1/3] ARM: dts: Update board files for pwm support Tony Prisk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350643135-13197-1-git-send-email-linux@prisktech.co.nz \
--to=linux@prisktech.co.nz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).