From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 09/11] ARM: Kirkwood: Convert ib62x0 to pinctrl.
Date: Sat, 20 Oct 2012 15:11:39 -0000 [thread overview]
Message-ID: <1350745663-5277-10-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1350745663-5277-1-git-send-email-andrew@lunn.ch>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
arch/arm/boot/dts/kirkwood-ib62x0.dts | 41 +++++++++++++++++++++++++++++++++
arch/arm/mach-kirkwood/board-ib62x0.c | 21 -----------------
2 files changed, 41 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index 66794ed..713b39b 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -16,6 +16,47 @@
};
ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+ compatible = "marvell,88f6281-pinctrl";
+ reg = <0x10000 0x20>;
+
+ pinctrl-0 = < &pmx_nand
+ &pmx_led_os_red &pmx_power_off
+ &pmx_led_os_green &pmx_led_usb_transfer
+ &pmx_button_reset &pmx_button_usb_copy >;
+ pinctrl-names = "default";
+
+ pmx_nand: pmx-nand {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp04", "mpp5", "mpp18",
+ "mpp19";
+ marvell,function = "nand";
+ };
+ pmx_led_os_red: pmx-led-os-red {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+ pmx_power_off: pmx-power-off {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+ pmx_led_os_green: pmx-led-os-green {
+ marvell,pins = "mpp25";
+ marvell,function = "gpio";
+ };
+ pmx_led_usb_transfer: pmx-led-usb-transfer {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+ pmx_button_reset: pmx-button-reset {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+ pmx_button_usb_copy: pmx-button-usb-copy {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ };
serial at 12000 {
clock-frequency = <200000000>;
status = "okay";
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index cfc47f8..1b2a4a4 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -23,7 +23,6 @@
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
-#include "mpp.h"
#define IB62X0_GPIO_POWER_OFF 24
@@ -31,24 +30,6 @@ static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static unsigned int ib62x0_mpp_config[] __initdata = {
- MPP0_NF_IO2,
- MPP1_NF_IO3,
- MPP2_NF_IO4,
- MPP3_NF_IO5,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP22_GPIO, /* OS LED red */
- MPP24_GPIO, /* Power off device */
- MPP25_GPIO, /* OS LED green */
- MPP27_GPIO, /* USB transfer LED */
- MPP28_GPIO, /* Reset button */
- MPP29_GPIO, /* USB Copy button */
- 0
-};
-
static void ib62x0_power_off(void)
{
gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
@@ -59,8 +40,6 @@ void __init ib62x0_init(void)
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(ib62x0_mpp_config);
-
kirkwood_ehci_init();
kirkwood_ge00_init(&ib62x0_ge00_data);
if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
--
1.7.10.4
next prev parent reply other threads:[~2012-10-20 15:11 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-20 15:07 [RFC 00/11] Convert Kirkwood to pinctrl Andrew Lunn
2012-10-20 15:11 ` [RFC 07/11] ARM: Kirkwood: Convert dreamplug " Andrew Lunn
2012-10-20 15:11 ` [RFC 06/11] ARM: Kirkwood: Convert dockstar " Andrew Lunn
2012-10-20 15:11 ` [RFC 05/11] ARM: Kirkwood: Convert dnskw " Andrew Lunn
2012-10-20 15:11 ` [RFC 02/11] ARM: Kirkwood: Allow use of MVEBU GPIO driver Andrew Lunn
2012-10-20 15:11 ` [RFC 01/11] ARM: Kirkwood: Allow use of pinctrl Andrew Lunn
2012-10-20 15:11 ` [RFC 03/11] ARM: Kirkwood: Convert TS219 to pinctrl Andrew Lunn
2012-10-20 15:11 ` [RFC 04/11] ARM: Kirkwood: Convert iConnect " Andrew Lunn
2012-10-20 15:11 ` [RFC 08/11] ARM: Kirkwood: Convert GoFlex Net " Andrew Lunn
2012-10-20 15:11 ` Andrew Lunn [this message]
2012-10-20 15:11 ` [RFC 10/11] ARM: Kirkwood: Convert lsxl boards " Andrew Lunn
2012-10-20 15:11 ` [RFC 11/11] ARM: Kirkwood: Convert IX2-200 " Andrew Lunn
[not found] ` <20121021115716.GA22437@schnuecks.de>
2012-10-21 17:57 ` [RFC 00/11] Convert Kirkwood " Andrew Lunn
2012-10-21 19:09 ` Thomas Petazzoni
2012-10-21 19:16 ` Andrew Lunn
2012-10-21 21:11 ` Sebastian Hesselbarth
2012-10-22 4:54 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350745663-5277-10-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).