From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 04/11] ARM: Kirkwood: Convert iConnect to pinctrl.
Date: Sat, 20 Oct 2012 15:11:35 -0000 [thread overview]
Message-ID: <1350745663-5277-5-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1350745663-5277-1-git-send-email-andrew@lunn.ch>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
arch/arm/boot/dts/kirkwood-iconnect.dts | 52 +++++++++++++++++++++++++++++++
arch/arm/mach-kirkwood/board-iconnect.c | 17 ----------
2 files changed, 52 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index d97cd9d..7b926f7 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -18,6 +18,58 @@
};
ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+ compatible = "marvell,88f6281-pinctrl";
+ reg = <0x10000 0x20>;
+
+ pinctrl-0 = < &pmx_gpio_12 &pmx_gpio_35
+ &pmx_gpio_41 &pmx_gpio_42
+ &pmx_gpio_43 &pmx_gpio_44
+ &pmx_gpio_45 &pmx_gpio_46
+ &pmx_gpio_47 &pmx_gpio_48 >;
+ pinctrl-names = "default";
+
+ pmx_gpio_12: pmx-gpio-12 {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_35: pmx-gpio-35 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_41: pmx-gpio-41 {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_42: pmx-gpio-42 {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_43: pmx-gpio-43 {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_44: pmx-gpio-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_45: pmx-gpio-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_46: pmx-gpio-46 {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_47: pmx-gpio-47 {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_48: pmx-gpio-48 {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+ };
i2c at 11000 {
status = "okay";
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index d084b1e..aeba479 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -21,30 +21,13 @@
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data iconnect_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(11),
};
-static unsigned int iconnect_mpp_config[] __initdata = {
- MPP12_GPIO,
- MPP35_GPIO,
- MPP41_GPIO,
- MPP42_GPIO,
- MPP43_GPIO,
- MPP44_GPIO,
- MPP45_GPIO,
- MPP46_GPIO,
- MPP47_GPIO,
- MPP48_GPIO,
- 0
-};
-
void __init iconnect_init(void)
{
- kirkwood_mpp_conf(iconnect_mpp_config);
-
kirkwood_ehci_init();
kirkwood_ge00_init(&iconnect_ge00_data);
}
--
1.7.10.4
next prev parent reply other threads:[~2012-10-20 15:11 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-20 15:07 [RFC 00/11] Convert Kirkwood to pinctrl Andrew Lunn
2012-10-20 15:11 ` [RFC 07/11] ARM: Kirkwood: Convert dreamplug " Andrew Lunn
2012-10-20 15:11 ` [RFC 06/11] ARM: Kirkwood: Convert dockstar " Andrew Lunn
2012-10-20 15:11 ` [RFC 05/11] ARM: Kirkwood: Convert dnskw " Andrew Lunn
2012-10-20 15:11 ` [RFC 02/11] ARM: Kirkwood: Allow use of MVEBU GPIO driver Andrew Lunn
2012-10-20 15:11 ` [RFC 01/11] ARM: Kirkwood: Allow use of pinctrl Andrew Lunn
2012-10-20 15:11 ` [RFC 03/11] ARM: Kirkwood: Convert TS219 to pinctrl Andrew Lunn
2012-10-20 15:11 ` Andrew Lunn [this message]
2012-10-20 15:11 ` [RFC 08/11] ARM: Kirkwood: Convert GoFlex Net " Andrew Lunn
2012-10-20 15:11 ` [RFC 09/11] ARM: Kirkwood: Convert ib62x0 " Andrew Lunn
2012-10-20 15:11 ` [RFC 10/11] ARM: Kirkwood: Convert lsxl boards " Andrew Lunn
2012-10-20 15:11 ` [RFC 11/11] ARM: Kirkwood: Convert IX2-200 " Andrew Lunn
[not found] ` <20121021115716.GA22437@schnuecks.de>
2012-10-21 17:57 ` [RFC 00/11] Convert Kirkwood " Andrew Lunn
2012-10-21 19:09 ` Thomas Petazzoni
2012-10-21 19:16 ` Andrew Lunn
2012-10-21 21:11 ` Sebastian Hesselbarth
2012-10-22 4:54 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350745663-5277-5-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).