From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/9] ARM: Kirkwood: Convert GoFlex Net to pinctrl.
Date: Wed, 24 Oct 2012 16:53:51 +0200 [thread overview]
Message-ID: <1351090434-30499-7-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1351090434-30499-1-git-send-email-andrew@lunn.ch>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
arch/arm/boot/dts/kirkwood-goflexnet.dts | 57 ++++++++++++++++++++++++++++++
arch/arm/mach-kirkwood/board-goflexnet.c | 18 ----------
2 files changed, 57 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index 7c8238f..46d16a2 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -16,6 +16,63 @@
};
ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+ compatible = "marvell,88f6281-pinctrl";
+ reg = <0x10000 0x20>;
+
+ pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
+ &pmx_led_left_cap_0 &pmx_led_left_cap_1
+ &pmx_led_left_cap_2 &pmx_led_left_cap_3
+ &pmx_led_right_cap_0 &pmx_led_right_cap_1
+ &pmx_led_right_cap_2 &pmx_led_right_cap_3
+ >;
+ pinctrl-names = "default";
+
+ pmx_usb_power_enable: pmx-usb-power-enable {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ pmx_led_right_cap_0: pmx-led_right_cap_0 {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_led_right_cap_1: pmx-led_right_cap_1 {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_led_right_cap_2: pmx-led_right_cap_2 {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+ pmx_led_right_cap_3: pmx-led_right_cap_3 {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_led_left_cap_0: pmx-led_left_cap_0 {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_led_left_cap_1: pmx-led_left_cap_1 {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_led_left_cap_2: pmx-led_left_cap_2 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_led_left_cap_3: pmx-led_left_cap_3 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ pmx_led_green: pmx-led_green {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ pmx_led_orange: pmx-led_orange {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ };
serial at 12000 {
clock-frequency = <200000000>;
status = "ok";
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
index 001ca8c..9643f4b 100644
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -34,34 +34,16 @@
#include <mach/bridge-regs.h>
#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
-static unsigned int goflexnet_mpp_config[] __initdata = {
- MPP29_GPIO, /* USB Power Enable */
- MPP47_GPIO, /* LED Orange */
- MPP46_GPIO, /* LED Green */
- MPP45_GPIO, /* LED Left Capacity 3 */
- MPP44_GPIO, /* LED Left Capacity 2 */
- MPP43_GPIO, /* LED Left Capacity 1 */
- MPP42_GPIO, /* LED Left Capacity 0 */
- MPP41_GPIO, /* LED Right Capacity 3 */
- MPP40_GPIO, /* LED Right Capacity 2 */
- MPP39_GPIO, /* LED Right Capacity 1 */
- MPP38_GPIO, /* LED Right Capacity 0 */
- 0
-};
-
void __init goflexnet_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(goflexnet_mpp_config);
-
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
pr_err("can't setup GPIO 29 (USB Power Enable)\n");
--
1.7.10.4
next prev parent reply other threads:[~2012-10-24 14:53 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-24 14:53 [PATCH 0/9] ARM: Kirkwood: Convert to pinctrl Andrew Lunn
2012-10-24 14:53 ` [PATCH 1/9] ARM: Kirkwood: Convert TS219 " Andrew Lunn
2012-10-24 19:31 ` Thomas Petazzoni
2012-10-24 19:49 ` Sebastian Hesselbarth
2012-10-24 20:00 ` Thomas Petazzoni
2012-10-24 20:04 ` Andrew Lunn
2012-10-24 20:05 ` Thomas Petazzoni
2012-10-24 20:14 ` Sebastian Hesselbarth
2012-10-24 20:19 ` Thomas Petazzoni
2012-10-24 14:53 ` [PATCH 2/9] ARM: Kirkwood: Convert iConnect " Andrew Lunn
2012-10-24 14:53 ` [PATCH 3/9] ARM: Kirkwood: Convert dnskw " Andrew Lunn
2012-10-25 22:58 ` Jamie Lentin
2012-10-26 6:01 ` Andrew Lunn
2012-10-26 9:42 ` Jamie Lentin
2012-10-26 10:24 ` Andrew Lunn
2012-10-26 12:30 ` Jamie Lentin
2012-10-24 14:53 ` [PATCH 4/9] ARM: Kirkwood: Convert dockstar " Andrew Lunn
2012-10-24 14:53 ` [PATCH 5/9] ARM: Kirkwood: Convert dreamplug " Andrew Lunn
2012-10-24 14:53 ` Andrew Lunn [this message]
2012-10-26 17:28 ` [PATCH 6/9] ARM: Kirkwood: Convert GoFlex Net " Josh Coombs
2012-10-27 8:51 ` Andrew Lunn
2012-10-28 14:31 ` Josh Coombs
2012-10-24 14:53 ` [PATCH 7/9] ARM: Kirkwood: Convert ib62x0 " Andrew Lunn
2012-10-24 20:40 ` Simon Baatz
2012-10-24 14:53 ` [PATCH 8/9] ARM: Kirkwood: Convert lsxl boards " Andrew Lunn
2012-10-24 20:37 ` Michael Walle
2012-10-28 16:40 ` Michael Walle
2012-10-24 14:53 ` [PATCH 9/9] ARM: Kirkwood: Convert IX2-200 " Andrew Lunn
2012-10-24 20:04 ` Thomas Petazzoni
2012-10-24 20:20 ` Andrew Lunn
2012-10-24 20:29 ` Thomas Petazzoni
2012-10-24 15:29 ` [PATCH 0/9] ARM: Kirkwood: Convert " Josh Coombs
2012-10-24 15:35 ` Andrew Lunn
2012-10-24 19:26 ` Thomas Petazzoni
2012-10-24 18:06 ` Michael Walle
2012-10-24 20:01 ` Andrew Lunn
2012-10-24 20:47 ` Michael Walle
2012-10-24 21:33 ` Thomas Petazzoni
2012-10-25 5:46 ` Andrew Lunn
2012-10-25 6:28 ` Thomas Petazzoni
2012-10-25 7:39 ` Michael Walle
2012-10-25 7:43 ` Thomas Petazzoni
2012-10-25 20:19 ` Michael Walle
2012-10-26 18:06 ` Michael Walle
2012-10-26 18:45 ` Thomas Petazzoni
2012-10-26 20:17 ` Michael Walle
2012-10-27 8:59 ` Andrew Lunn
2012-10-25 22:57 ` Jamie Lentin
2012-10-28 16:57 ` Andrew Lunn
2012-10-28 18:17 ` Michael Walle
2012-10-28 19:50 ` Simon Baatz
2012-10-28 20:01 ` Andrew Lunn
2012-10-28 21:06 ` Jamie Lentin
2012-10-31 22:38 ` Josh Coombs
2012-11-07 16:13 ` [RFC PATCH 0/2] Kirkwood 98dx4122 pinctrl variant Valentin Longchamp
2012-11-07 17:36 ` Andrew Lunn
2012-11-07 16:13 ` [PATCH 1/2] ARM: support 98DX412x kirkwoods with pinctrl Valentin Longchamp
2012-11-07 16:13 ` [PATCH 2/2] ARM: convert the km_kirkwood board to pinctrl Valentin Longchamp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351090434-30499-7-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).