[PATCHv4 2/2] i2c: omap: make reset a seperate function

[shubhrajyoti@ti.com (Shubhrajyoti D)]

Implement reset as a separate function.
This will enable us to make sure that we don't do the
calculation again on every transfer.
Also at probe the reset is not added as the hwmod is doing that
for us.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
---
some of the errors may not need a reset.
will check and post separate patch.

 drivers/i2c/busses/i2c-omap.c |   25 ++++++++++++++++---------
 1 files changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 38acf1a..a25b7b0 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -309,15 +309,9 @@ static void __omap_i2c_init(struct omap_i2c_dev *dev)
 		omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
 }
 
-static int omap_i2c_init(struct omap_i2c_dev *dev)
+static int omap_i2c_reset(struct omap_i2c_dev *dev)
 {
-	u16 psc = 0, scll = 0, sclh = 0;
-	u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
-	unsigned long fclk_rate = 12000000;
 	unsigned long timeout;
-	unsigned long internal_clk = 0;
-	struct clk *fclk;
-
 	if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
 		/* Disable I2C controller before soft reset */
 		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
@@ -363,6 +357,17 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 			dev->westate = OMAP_I2C_WE_ALL;
 		}
 	}
+	return 0;
+}
+
+static int omap_i2c_init(struct omap_i2c_dev *dev)
+{
+	u16 psc = 0, scll = 0, sclh = 0;
+	u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
+	unsigned long fclk_rate = 12000000;
+	unsigned long internal_clk = 0;
+	struct clk *fclk;
+
 
 	if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
 		/*
@@ -595,7 +600,8 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	if (timeout == 0) {
 		dev_err(dev->dev, "controller timed out\n");
 		ret = -ETIMEDOUT;
-		omap_i2c_init(dev);
+		omap_i2c_reset(dev);
+		__omap_i2c_init(dev);
 		goto out;
 	}
 
@@ -606,7 +612,8 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
 			    OMAP_I2C_STAT_XUDF)) {
 		ret = -EIO;
-		omap_i2c_init(dev);
+		omap_i2c_reset(dev);
+		__omap_i2c_init(dev);
 		goto out;
 	}
 
-- 
1.7.5.4