From mboxrd@z Thu Jan 1 00:00:00 1970 From: jon-hunter@ti.com (Jon Hunter) Date: Thu, 25 Oct 2012 14:24:13 -0500 Subject: [PATCH V3 0/2] ARM: OMAP2+: Add device-tree support for 32kHz counter Message-ID: <1351193055-12488-1-git-send-email-jon-hunter@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This series adds device-tree support for the 32kHz counter on OMAP2+ devices, which is used as the default kernel clock-source for OMAP devices. Boot tested on OMAP2420 H4, OMAP3430 Beagle Board and OMAP4430 Panda Board with and without device-tree present. Based and dependent upon OMAP2+ series that adds device-tree support for DMTIMERs [1]. V3 changes: - Correct counter register sizes V2 changes: - Updated counter name in binding per Benoit Cousson's feedback [1] http://marc.info/?l=linux-omap&m=135065875808614&w=2 Jon Hunter (2): ARM: dts: OMAP: Add counter-32k nodes ARM: OMAP2+: Add device-tree support for 32kHz counter .../devicetree/bindings/arm/omap/counter.txt | 15 +++++++++++ arch/arm/boot/dts/omap2420.dtsi | 6 +++++ arch/arm/boot/dts/omap2430.dtsi | 6 +++++ arch/arm/boot/dts/omap3.dtsi | 6 +++++ arch/arm/boot/dts/omap4.dtsi | 6 +++++ arch/arm/mach-omap2/timer.c | 28 +++++++++++++++++++- 6 files changed, 66 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/arm/omap/counter.txt -- 1.7.9.5