[PATCH V4 2/7] ARM: tegra: cpuidle: add CPU resume function

[josephl@nvidia.com (Joseph Lo)]

The CPU suspending on Tegra means CPU power gating. We add a resume
function for taking care the CPUs that resume from power gating status.
This function was been hooked to the reset handler. We take care
everything here before go into kernel.

Be aware of that, you may see the legacy power status "LP2" in the code
which is exactly the same meaning of "CPU power down".

Based on the work by:
Scott Williams <scwilliams@nvidia.com>
Colin Cross <ccross@android.com>
Gary King <gking@nvidia.com>

Signed-off-by: Joseph Lo <josephl@nvidia.com>
---
V4:
* rebased on next-20121031
* add ifdef of CONFIG_HAVE_ARM_SCU in tegra_resume, this can make the code
  re-usable for the future chips (e.g. A15)
V3:
* update subject and the commit message
V2:
* moving the code that only for Tegra30 inside the ifdef in the tegra_resume
---
 arch/arm/mach-tegra/headsmp.S |   60 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-tegra/reset.c   |    6 ++++
 arch/arm/mach-tegra/sleep.h   |    1 +
 3 files changed, 67 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S
index 93f0370..82dc84b 100644
--- a/arch/arm/mach-tegra/headsmp.S
+++ b/arch/arm/mach-tegra/headsmp.S
@@ -68,6 +68,55 @@ ENTRY(tegra_secondary_startup)
         b       secondary_startup
 ENDPROC(tegra_secondary_startup)
 
+#ifdef CONFIG_PM_SLEEP
+/*
+ *	tegra_resume
+ *
+ *	  CPU boot vector when restarting the a CPU following
+ *	  an LP2 transition. Also branched to by LP0 and LP1 resume after
+ *	  re-enabling sdram.
+ */
+ENTRY(tegra_resume)
+	bl	v7_invalidate_l1
+	/* Enable coresight */
+	mov32	r0, 0xC5ACCE55
+	mcr	p14, 0, r0, c7, c12, 6
+
+	cpu_id	r0
+	cmp	r0, #0				@ CPU0?
+	bne	cpu_resume			@ no
+
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+	/* Are we on Tegra20? */
+	mov32	r6, TEGRA_APB_MISC_BASE
+	ldr	r0, [r6, #APB_MISC_GP_HIDREV]
+	and	r0, r0, #0xff00
+	cmp	r0, #(0x20 << 8)
+	beq	1f				@ Yes
+	/* Clear the flow controller flags for this CPU. */
+	mov32	r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR	@ CPU0 CSR
+	ldr	r1, [r2]
+	/* Clear event & intr flag */
+	orr	r1, r1, \
+		#FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+	movw	r0, #0x0FFD	@ enable, cluster_switch, immed, & bitmaps
+	bic	r1, r1, r0
+	str	r1, [r2]
+1:
+#endif
+
+#ifdef CONFIG_HAVE_ARM_SCU
+	/* enable SCU */
+	mov32	r0, TEGRA_ARM_PERIF_BASE
+	ldr	r1, [r0]
+	orr	r1, r1, #1
+	str	r1, [r0]
+#endif
+
+	b	cpu_resume
+ENDPROC(tegra_resume)
+#endif
+
 	.align L1_CACHE_SHIFT
 ENTRY(__tegra_cpu_reset_handler_start)
 
@@ -121,6 +170,17 @@ ENTRY(__tegra_cpu_reset_handler)
 1:
 #endif
 
+	/* Waking up from LP2? */
+	ldr	r9, [r12, #RESET_DATA(MASK_LP2)]
+	tst	r9, r11				@ if in_lp2
+	beq	__is_not_lp2
+	ldr	lr, [r12, #RESET_DATA(STARTUP_LP2)]
+	cmp	lr, #0
+	bleq	__die				@ no LP2 startup handler
+	bx	lr
+
+__is_not_lp2:
+
 #ifdef CONFIG_SMP
 	/*
 	 * Can only be secondary boot (initial or hotplug) but CPU 0
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index e05da7d..3fd89ec 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -25,6 +25,7 @@
 #include "iomap.h"
 #include "irammap.h"
 #include "reset.h"
+#include "sleep.h"
 #include "fuse.h"
 
 #define TEGRA_IRAM_RESET_BASE (TEGRA_IRAM_BASE + \
@@ -79,5 +80,10 @@ void __init tegra_cpu_reset_handler_init(void)
 		virt_to_phys((void *)tegra_secondary_startup);
 #endif
 
+#ifdef CONFIG_PM_SLEEP
+	__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] =
+		virt_to_phys((void *)tegra_resume);
+#endif
+
 	tegra_cpu_reset_handler_enable();
 }
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
index 4889b28..addb83f 100644
--- a/arch/arm/mach-tegra/sleep.h
+++ b/arch/arm/mach-tegra/sleep.h
@@ -72,6 +72,7 @@
 	dsb
 .endm
 #else
+void tegra_resume(void);
 
 #ifdef CONFIG_HOTPLUG_CPU
 void tegra20_hotplug_init(void);
-- 
1.7.0.4