From: rajanikanth.hv@linaro.org (Rajanikanth H.V)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/4] Implement device tree support for ab8500 BM Devices
Date: Wed, 31 Oct 2012 15:40:29 +0000 [thread overview]
Message-ID: <1351698033-8980-1-git-send-email-rajanikanth.hv@linaro.org> (raw)
From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>
This patch-set adds device tree binding for ab8500 battery-managed
devices. Removes the redundant platform structure maintained
across bm devices and implements common DT probe routine across all the
modules.
Test status:
a) Tested across 'legacy platform data' and DT binding support
a.1) ab8500_charger driver fails to get regulator in the
legacy platform mode.
b) Interrupt numbers assigned differs between legacy and FDT mode.
(a) Legacy platform_data Mode:
root at ME:/ cat /proc/interrupts
CPU0 CPU1
483: 0 0 ab8500 ab8500-ponkey-dbf
484: 0 0 ab8500 ab8500-ponkey-dbr
485: 0 0 ab8500 BATT_OVV
494: 0 1 ab8500
495: 0 0 ab8500 ab8500-rtc
501: 0 13 ab8500 NCONV_ACCU
503: 7 22 ab8500 CCEOC
504: 0 1 ab8500 CC_INT_CALIB
505: 0 0 ab8500 LOW_BAT_F
516: 0 34 ab8500 ab8500-gpadc
556: 0 0 ab8500 usb-link-status
(b) FDT Mode:
root at ME:/ cat /proc/interrupts
CPU0 CPU1
6: 0 0 ab8500 ab8500-ponkey-dbf
7: 0 0 ab8500 ab8500-ponkey-dbr
8: 0 0 ab8500 BATT_OVV
162: 0 7 ab8500 ab8500-gpadc
163: 0 1 ab8500
164: 0 0 ab8500 ab8500-rtc
484: 0 0 ab8500 usb-link-status
499: 0 4 ab8500 NCONV_ACCU
500: 0 0 ab8500 LOW_BAT_F
502: 0 1 ab8500 CC_INT_CALIB
503: 0 6 ab8500 CCEOC
c) Event handlers across bm-modules have been verified only
during 'battery discharge process' as 'battery charging process'
depends on ab8500-usb code
Rajanikanth H.V (4):
mfd: ab8500: add devicetree support for fuelgauge
mfd: ab8500: add devicetree support for btemp
mfd: ab8500: add devicetree support for charger
mfd: ab8500: add devicetree support for chargalg
Documentation/devicetree/bindings/mfd/ab8500.txt | 27 +-
.../bindings/power_supply/ab8500/btemp.txt | 16 +
.../bindings/power_supply/ab8500/chargalg.txt | 16 +
.../bindings/power_supply/ab8500/charger.txt | 25 +
.../devicetree/bindings/power_supply/ab8500/fg.txt | 58 +++
arch/arm/boot/dts/dbx5x0.dtsi | 28 +-
drivers/mfd/ab8500-core.c | 20 +
drivers/power/Kconfig | 6 -
drivers/power/Makefile | 2 +-
drivers/power/ab8500_bmdata.c | 518 ++++++++++++++++++++
drivers/power/ab8500_btemp.c | 76 +--
drivers/power/ab8500_charger.c | 83 ++--
drivers/power/ab8500_fg.c | 81 +--
drivers/power/abx500_chargalg.c | 56 ++-
include/linux/mfd/abx500.h | 34 +-
15 files changed, 881 insertions(+), 165 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/charger.txt
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
create mode 100644 drivers/power/ab8500_bmdata.c
--
1.7.10.4
next reply other threads:[~2012-10-31 15:40 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-31 15:40 Rajanikanth H.V [this message]
2012-10-31 15:40 ` [PATCH 1/4] mfd: ab8500: add devicetree support for fuelgauge Rajanikanth H.V
2012-11-01 15:15 ` Francesco Lavra
2012-11-07 18:45 ` Rajanikanth H V
2012-11-10 16:53 ` Francesco Lavra
2012-11-15 11:34 ` Rajanikanth HV
2012-10-31 15:40 ` [PATCH 2/4] mfd: ab8500: add devicetree support for btemp Rajanikanth H.V
2012-10-31 15:40 ` [PATCH 3/4] mfd: ab8500: add devicetree support for charger Rajanikanth H.V
2012-10-31 15:40 ` [PATCH 4/4] mfd: ab8500: add devicetree support for chargalg Rajanikanth H.V
2012-11-19 3:46 ` [PATCH 0/4] Implement device tree support for ab8500 BM Devices Anton Vorontsov
2012-11-19 3:58 ` Rajanikanth HV
2012-11-19 4:57 ` Anton Vorontsov
-- strict thread matches above, loose matches on Subject: below --
2012-11-22 18:43 Rajanikanth H.V
2012-10-25 6:30 Rajanikanth H.V
2012-10-01 4:08 Rajanikanth H.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351698033-8980-1-git-send-email-rajanikanth.hv@linaro.org \
--to=rajanikanth.hv@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).