From: thomas.abraham@linaro.org (Thomas Abraham)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/5] ARM: dts: add mct device tree node for all supported Exynos SoC's
Date: Sat, 03 Nov 2012 20:15:38 +0530 [thread overview]
Message-ID: <1351953938-13487-6-git-send-email-thomas.abraham@linaro.org> (raw)
In-Reply-To: <1351953938-13487-1-git-send-email-thomas.abraham@linaro.org>
Add MCT device tree node for Exynos4210, Exynos4212, Exynos4412 and Exynos5250.
Cc: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
---
arch/arm/boot/dts/exynos4210.dtsi | 8 ++++++++
arch/arm/boot/dts/exynos4212.dtsi | 10 ++++++++++
arch/arm/boot/dts/exynos4412.dtsi | 8 ++++++++
arch/arm/boot/dts/exynos5250.dtsi | 21 +++++++++++++++++++++
4 files changed, 47 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 214c557..129762c 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -42,6 +42,14 @@
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
+ mct at 10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+ <0 42 0>, <0 48 0>;
+ samsung,mct-nr-local-irqs = <4>;
+ };
+
pinctrl_0: pinctrl at 11400000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11400000 0x1000>;
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index c6ae200..87c6da4 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -25,4 +25,14 @@
gic:interrupt-controller at 10490000 {
cpu-offset = <0x8000>;
};
+
+ mct at 10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+ <1 12 0>, <1 12 0>;
+ samsung,mct-nr-local-irqs = <2>;
+ };
+
+
};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index d7dfe31..ccf020a 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -25,4 +25,12 @@
gic:interrupt-controller at 10490000 {
cpu-offset = <0x4000>;
};
+
+ mct at 10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+ <1 12 0>, <1 12 0>, <1 12 0>, <1 12 0>;
+ samsung,mct-nr-local-irqs = <4>;
+ };
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 49546bc..688acf2 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -56,6 +56,27 @@
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
};
+ mct at 101C0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101C0000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+ samsung,mct-nr-local-irqs = <2>;
+
+ mct_map: mct-map {
+ compatible = "samsung,mct-map";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &combiner 23 3>,
+ <0x4 0 &gic 0 120 0>,
+ <0x5 0 &gic 0 121 0>;
+ };
+ };
+
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x101D0000 0x100>;
--
1.6.6.rc2
prev parent reply other threads:[~2012-11-03 14:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-03 14:45 [PATCH 0/5] ARM: Exynos: Enable device tree support for MCT controller Thomas Abraham
2012-11-03 14:45 ` [PATCH 1/5] ARM: Exynos: add a register base address variable in mct controller driver Thomas Abraham
2012-11-03 14:45 ` [PATCH 2/5] ARM: Exynos: prepare an array of MCT interrupt numbers and use it Thomas Abraham
2012-11-03 14:45 ` [PATCH 3/5] ARM: Exynos: add device tree support for MCT controller driver Thomas Abraham
2012-11-03 16:50 ` Sylwester Nawrocki
2012-11-05 7:46 ` Thomas Abraham
2012-11-03 14:45 ` [PATCH 4/5] ARM: Exynos: remove static io-remapping of mct registers for Exynos5 Thomas Abraham
2012-11-03 14:45 ` Thomas Abraham [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351953938-13487-6-git-send-email-thomas.abraham@linaro.org \
--to=thomas.abraham@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).