From mboxrd@z Thu Jan 1 00:00:00 1970 From: anilkumar@ti.com (AnilKumar Ch) Date: Mon, 5 Nov 2012 16:15:49 +0530 Subject: [PATCH 09/10] ARM: dts: AM33XX: Add pinmux configuration for gpio-keys to EVMSK In-Reply-To: <1352112350-13398-1-git-send-email-anilkumar@ti.com> References: <1352112350-13398-1-git-send-email-anilkumar@ti.com> Message-ID: <1352112350-13398-10-git-send-email-anilkumar@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add pinmux configurations for gpio based keys to am335x-evmsk. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch --- arch/arm/boot/dts/am335x-evmsk.dts | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 7262fa8..0f825dd 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -32,7 +32,7 @@ am33xx_pinmux: pinmux at 44e10800 { pinctrl-names = "default"; - pinctrl-0 = <&user_leds_s0>; + pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>; user_leds_s0: user_leds_s0 { pinctrl-single,pins = < @@ -42,6 +42,15 @@ 0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */ >; }; + + gpio_keys_s0: gpio_keys_s0 { + pinctrl-single,pins = < + 0x94 0x27 /* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */ + 0x90 0x27 /* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */ + 0x70 0x27 /* gpmc_wait0.gpio0_30, INPUT | MODE7 */ + 0x9c 0x27 /* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */ + >; + }; }; ocp { -- 1.7.9.5