[PATCH v2] ARM: dts: AM33XX: Add usbss node

Benoit Cousson
2012-11-06T15:32:31Z

On 11/06/2012 03:29 PM, Felipe Balbi wrote:
> Hi,
>
> On Tue, Nov 06, 2012 at 07:59:38PM +0530, Afzal Mohammed wrote:
>> From: Ajay Kumar Gupta <ajay.gupta@ti.com>
>>
>> Device tree node for usbss on AM33XX. There are two musb
>> controllers on am33xx platform so have port0-mode and
>> port1-mode data.
>>
>> [afzal at ti.com: reg & interrupt property addition]
>>
>> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
>> Signed-off-by: Santhapuri, Damodar <damodar.santhapuri@ti.com>
>> Signed-off-by: Ravi Babu <ravibabu@ti.com>
>> Signed-off-by: Afzal Mohammed <afzal@ti.com>
>
> to my eyes, this looks ok.
>
> Reviewed-by: Felipe Balbi <balbi@ti.com>

Thanks Felipe. Patch applied in for_3.8/dts_part2 branch.

Regards,
Benoit

>
>> ---
>>
>> v2: node named as "usb"
>>
>> Depends on "usb: musb: dsps: dt binding - add resources, example"
>> (https://patchwork.kernel.org/patch/1704691/)
>>
>> arch/arm/boot/dts/am33xx.dtsi | 17 +++++++++++++++++
>> 1 file changed, 17 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
>> index 5dfd682..20a3f29 100644
>> --- a/arch/arm/boot/dts/am33xx.dtsi
>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>> @@ -321,5 +321,22 @@
>> ti,hwmods = "spi1";
>> status = "disabled";
>> };
>> +
>> + usb at 47400000 {
>> + compatible = "ti,musb-am33xx";
>> + reg = <0x47400000 0x1000 /* usbss */
>> + 0x47401000 0x800 /* musb instance 0 */
>> + 0x47401800 0x800>; /* musb instance 1 */
>> + interrupts = <17 /* usbss */
>> + 18 /* musb instance 0 */
>> + 19>; /* musb instance 1 */
>> + multipoint = <1>;
>> + num-eps = <16>;
>> + ram-bits = <12>;
>> + port0-mode = <3>;
>> + port1-mode = <3>;
>> + power = <250>;
>> + ti,hwmods = "usb_otg_hs";
>> + };
>> };
>> };
>> --
>> 1.7.12
>>
>