From: horms@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/7] sh: clkfwk: add sh_clk_fsidiv_register()
Date: Thu, 8 Nov 2012 10:27:33 +0900 [thread overview]
Message-ID: <1352338056-21107-5-git-send-email-horms@verge.net.au> (raw)
In-Reply-To: <1352338056-21107-1-git-send-email-horms@verge.net.au>
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
This patch adds sh_clk_fsidiv_register() to share FSI-DIV clock code
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
drivers/sh/clk/cpg.c | 86 ++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/sh_clk.h | 9 +++++
2 files changed, 95 insertions(+)
diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index 07e9fb4..b3dc441 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -361,3 +361,89 @@ int __init sh_clk_div4_reparent_register(struct clk *clks, int nr,
return sh_clk_div_register_ops(clks, nr, table,
&sh_clk_div4_reparent_clk_ops);
}
+
+/* FSI-DIV */
+static unsigned long fsidiv_recalc(struct clk *clk)
+{
+ u32 value;
+
+ value = __raw_readl(clk->mapping->base);
+
+ value >>= 16;
+ if (value < 2)
+ return clk->parent->rate;
+
+ return clk->parent->rate / value;
+}
+
+static long fsidiv_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk_rate_div_range_round(clk, 1, 0xffff, rate);
+}
+
+static void fsidiv_disable(struct clk *clk)
+{
+ __raw_writel(0, clk->mapping->base);
+}
+
+static int fsidiv_enable(struct clk *clk)
+{
+ u32 value;
+
+ value = __raw_readl(clk->mapping->base) >> 16;
+ if (value < 2)
+ return 0;
+
+ __raw_writel((value << 16) | 0x3, clk->mapping->base);
+
+ return 0;
+}
+
+static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 val;
+ int idx;
+
+ idx = (clk->parent->rate / rate) & 0xffff;
+ if (idx < 2)
+ __raw_writel(0, clk->mapping->base);
+ else
+ __raw_writel(idx << 16, clk->mapping->base);
+
+ return 0;
+}
+
+static struct sh_clk_ops fsidiv_clk_ops = {
+ .recalc = fsidiv_recalc,
+ .round_rate = fsidiv_round_rate,
+ .set_rate = fsidiv_set_rate,
+ .enable = fsidiv_enable,
+ .disable = fsidiv_disable,
+};
+
+int __init sh_clk_fsidiv_register(struct clk *clks, int nr)
+{
+ struct clk_mapping *map;
+ int i;
+
+ for (i = 0; i < nr; i++) {
+
+ map = kzalloc(sizeof(struct clk_mapping), GFP_KERNEL);
+ if (!map) {
+ pr_err("%s: unable to alloc memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* clks[i].enable_reg came from SH_CLK_FSIDIV() */
+ map->phys = (phys_addr_t)clks[i].enable_reg;
+ map->len = 8;
+
+ clks[i].enable_reg = 0; /* remove .enable_reg */
+ clks[i].ops = &fsidiv_clk_ops;
+ clks[i].mapping = map;
+
+ clk_register(&clks[i]);
+ }
+
+ return 0;
+}
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index 5091091..60c7239 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -199,4 +199,13 @@ int sh_clk_div6_reparent_register(struct clk *clks, int nr);
#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
+/* .enable_reg will be updated to .mapping on sh_clk_fsidiv_register() */
+#define SH_CLK_FSIDIV(_reg, _parent) \
+{ \
+ .enable_reg = (void __iomem *)_reg, \
+ .parent = _parent, \
+}
+
+int sh_clk_fsidiv_register(struct clk *clks, int nr);
+
#endif /* __SH_CLOCK_H */
--
1.7.10.4
next prev parent reply other threads:[~2012-11-08 1:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-08 1:27 [GIT PULL v2] Renesas ARM-based SoC boards for v3.8 #2 Simon Horman
2012-11-08 1:27 ` [PATCH 1/7] ARM: shmobile: marzen: add USB phy support Simon Horman
2012-11-08 1:27 ` [PATCH 2/7] ARM: shmobile: marzen: add USB EHCI driver support Simon Horman
2012-11-08 1:27 ` [PATCH 3/7] ARM: shmobile: marzen: add USB OHCI " Simon Horman
2012-11-08 1:27 ` Simon Horman [this message]
2012-11-08 1:27 ` [PATCH 5/7] ARM: shmobile: sh7372: sh7372_fsidivX_clk become non-global Simon Horman
2012-11-08 1:27 ` [PATCH 6/7] ARM: shmobile: sh7372: use sh_clk_fsidiv_register() for FSI-DIV clocks Simon Horman
2012-11-08 1:27 ` [PATCH 7/7] ARM: shmobile: r8a7740: add FSI-DVI clocks Simon Horman
2012-11-08 6:29 ` [GIT PULL v2] Renesas ARM-based SoC boards for v3.8 #2 Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352338056-21107-5-git-send-email-horms@verge.net.au \
--to=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox