From mboxrd@z Thu Jan 1 00:00:00 1970 From: a.kesavan@samsung.com (Abhilash Kesavan) Date: Fri, 09 Nov 2012 17:44:14 +0530 Subject: [PATCH] ARM: EXYNOS5: Add arm down clock support Message-ID: <1352463254-28423-1-git-send-email-a.kesavan@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org In idle state down clocking the arm cores can result in power savings. Program the power control registers to achieve this and save these registers across a suspend/resume cycle. Signed-off-by: Abhilash Kesavan --- arch/arm/mach-exynos/clock-exynos5.c | 2 + arch/arm/mach-exynos/cpuidle.c | 36 ++++++++++++++++++++++++ arch/arm/mach-exynos/include/mach/regs-clock.h | 19 ++++++++++++ 3 files changed, 57 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index a88e0d9..9bb6567 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -80,6 +80,8 @@ static struct sleep_save exynos5_clock_save[] = { SAVE_ITEM(EXYNOS5_VPLL_CON0), SAVE_ITEM(EXYNOS5_VPLL_CON1), SAVE_ITEM(EXYNOS5_VPLL_CON2), + SAVE_ITEM(EXYNOS5_PWR_CTRL1), + SAVE_ITEM(EXYNOS5_PWR_CTRL2), }; #endif diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index cff0595..4ddda91 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -156,12 +157,47 @@ static int exynos4_enter_lowpower(struct cpuidle_device *dev, return exynos4_enter_core0_aftr(dev, drv, new_index); } +static void __init exynos5_core_down_clk(void) +{ + unsigned int tmp; + + /* + * Enable arm clock down (in idle) and set arm divider + * ratios in WFI/WFE state. + */ + tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \ + PWR_CTRL1_CORE1_DOWN_RATIO | \ + PWR_CTRL1_DIV2_DOWN_EN | \ + PWR_CTRL1_DIV1_DOWN_EN | \ + PWR_CTRL1_USE_CORE1_WFE | \ + PWR_CTRL1_USE_CORE0_WFE | \ + PWR_CTRL1_USE_CORE1_WFI | \ + PWR_CTRL1_USE_CORE0_WFI; + __raw_writel(tmp, EXYNOS5_PWR_CTRL1); + + /* + * Enable arm clock up (on exiting idle). Set arm divider + * ratios when not in idle along with the standby duration + * ratios. + */ + tmp = PWR_CTRL2_DIV2_UP_EN | \ + PWR_CTRL2_DIV1_UP_EN | \ + PWR_CTRL2_DUR_STANDBY2_VAL | \ + PWR_CTRL2_DUR_STANDBY1_VAL | \ + PWR_CTRL2_CORE2_UP_RATIO | \ + PWR_CTRL2_CORE1_UP_RATIO; + __raw_writel(tmp, EXYNOS5_PWR_CTRL2); +} + static int __init exynos4_init_cpuidle(void) { int i, max_cpuidle_state, cpu_id; struct cpuidle_device *device; struct cpuidle_driver *drv = &exynos4_idle_driver; + if (soc_is_exynos5250()) + exynos5_core_down_clk(); + /* Setup cpuidle driver */ drv->state_count = (sizeof(exynos4_cpuidle_set) / sizeof(struct cpuidle_state)); diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h index 8c9b38c..d36ad76 100644 --- a/arch/arm/mach-exynos/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos/include/mach/regs-clock.h @@ -267,6 +267,9 @@ #define EXYNOS5_CLKDIV_STATCPU0 EXYNOS_CLKREG(0x00600) #define EXYNOS5_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x00604) +#define EXYNOS5_PWR_CTRL1 EXYNOS_CLKREG(0x01020) +#define EXYNOS5_PWR_CTRL2 EXYNOS_CLKREG(0x01024) + #define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100) #define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204) @@ -344,6 +347,22 @@ #define EXYNOS5_EPLLCON0_LOCKED_SHIFT (29) +#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28) +#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16) +#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9) +#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8) +#define PWR_CTRL1_USE_CORE1_WFE (1 << 5) +#define PWR_CTRL1_USE_CORE0_WFE (1 << 4) +#define PWR_CTRL1_USE_CORE1_WFI (1 << 1) +#define PWR_CTRL1_USE_CORE0_WFI (1 << 0) + +#define PWR_CTRL2_DIV2_UP_EN (1 << 25) +#define PWR_CTRL2_DIV1_UP_EN (1 << 24) +#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16) +#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8) +#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4) +#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0) + /* Compatibility defines and inclusion */ #include -- 1.6.6.1