From: linus.walleij@linaro.org (Linus Walleij)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/6] ARM: integrator: remove static CP syscon mapping
Date: Mon, 12 Nov 2012 01:52:58 +0100 [thread overview]
Message-ID: <1352681578-12969-1-git-send-email-linus.walleij@linaro.org> (raw)
This removes the static mapping for the CP system controller for
the device tree case. Fork the static mappings table and move
the system controller to only be statically mapped in the ATAG
boot path.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-integrator/integrator_cp.c | 50 +++++++++++++++++++++-----------
1 file changed, 33 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 9194a4f..7220210 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -52,11 +52,13 @@
#include "common.h"
+/* Base address to the CP controller */
+static void __iomem *intcp_con_base;
+
#define INTCP_PA_FLASH_BASE 0x24000000
#define INTCP_PA_CLCD_BASE 0xc0000000
-#define INTCP_VA_CTRL_BASE __io_address(INTEGRATOR_CP_CTL_BASE)
#define INTCP_FLASHPROG 0x04
#define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0)
#define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1)
@@ -127,11 +129,6 @@ static struct map_desc intcp_io_desc[] __initdata = {
.pfn = __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
.length = SZ_4K,
.type = MT_DEVICE
- }, {
- .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
- .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
}
};
@@ -147,9 +144,9 @@ static int intcp_flash_init(struct platform_device *dev)
{
u32 val;
- val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+ val = readl(intcp_con_base + INTCP_FLASHPROG);
val |= CINTEGRATOR_FLASHPROG_FLWREN;
- writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+ writel(val, intcp_con_base + INTCP_FLASHPROG);
return 0;
}
@@ -158,21 +155,21 @@ static void intcp_flash_exit(struct platform_device *dev)
{
u32 val;
- val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+ val = readl(intcp_con_base + INTCP_FLASHPROG);
val &= ~(CINTEGRATOR_FLASHPROG_FLVPPEN|CINTEGRATOR_FLASHPROG_FLWREN);
- writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+ writel(val, intcp_con_base + INTCP_FLASHPROG);
}
static void intcp_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
- val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+ val = readl(intcp_con_base + INTCP_FLASHPROG);
if (on)
val |= CINTEGRATOR_FLASHPROG_FLVPPEN;
else
val &= ~CINTEGRATOR_FLASHPROG_FLVPPEN;
- writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
+ writel(val, intcp_con_base + INTCP_FLASHPROG);
}
static struct physmap_flash_data intcp_flash_data = {
@@ -191,7 +188,7 @@ static struct physmap_flash_data intcp_flash_data = {
static unsigned int mmc_status(struct device *dev)
{
unsigned int status = readl(__io_address(0xca000000 + 4));
- writel(8, __io_address(INTEGRATOR_CP_CTL_BASE + 8));
+ writel(8, intcp_con_base + 8);
return status & 8;
}
@@ -337,9 +334,6 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
{ /* sentinel */ },
};
-/* Base address to the CP controller */
-static void __iomem *intcp_con_base;
-
static void __init intcp_init_of(void)
{
struct device_node *root;
@@ -418,6 +412,28 @@ MACHINE_END
#ifdef CONFIG_ATAGS
/*
+ * For the ATAG boot some static mappings are needed. This will
+ * go away with the ATAG support down the road.
+ */
+
+static struct map_desc intcp_io_desc_atag[] __initdata = {
+ {
+ .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ },
+};
+
+static void __init intcp_map_io_atag(void)
+{
+ iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag));
+ intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE);
+ intcp_map_io();
+}
+
+
+/*
* This is where non-devicetree initialization code is collected and stashed
* for eventual deletion.
*/
@@ -556,7 +572,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
.reserve = integrator_reserve,
- .map_io = intcp_map_io,
+ .map_io = intcp_map_io_atag,
.nr_irqs = NR_IRQS_INTEGRATOR_CP,
.init_early = intcp_init_early,
.init_irq = intcp_init_irq,
--
1.7.11.7
reply other threads:[~2012-11-12 0:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352681578-12969-1-git-send-email-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).