From mboxrd@z Thu Jan 1 00:00:00 1970 From: thomas@tomweber.eu (Thomas Weber) Date: Thu, 15 Nov 2012 19:12:03 +0100 Subject: [PATCH] ARM: OMAP3: Devkit8000: Add DDC i2c_bus_num Message-ID: <1353003123-7335-1-git-send-email-thomas@tomweber.eu> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add i2c bus number for DVI output. The driver uses this to detect if a panel is connected and to read EDID. Signed-off-by: Thomas Weber --- arch/arm/mach-omap2/board-devkit8000.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 1fd161e..6f04f0f 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -139,6 +139,7 @@ static struct omap_dss_device devkit8000_lcd_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = -1, + .i2c_bus_num = 1, }; static struct omap_dss_device devkit8000_dvi_device = { -- 1.8.0