linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] ARM: Kirkwood: Convert XOR instantiation to DT.
Date: Sun, 18 Nov 2012 11:44:57 +0100	[thread overview]
Message-ID: <1353235498-22638-2-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1353235498-22638-1-git-send-email-andrew@lunn.ch>

Use DT to describe the two XOR DMA engines on Kirkwood. Remove the
C code initialization.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---

These patches depend on the refactoring/DT patches from Thomas and NOT
the clock patches from me. With the clock patches, a slight different
patch is needed, specifying a clocks property in DT and no auxdata.

 arch/arm/boot/dts/kirkwood.dtsi   |   38 +++++++++++++++++++++++++++++++++++++
 arch/arm/mach-kirkwood/board-dt.c |    6 ++----
 2 files changed, 40 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 4e5b815..e0ba79d 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -77,6 +77,44 @@
 			status = "okay";
 		};
 
+		xor at 60800 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60800 0x100
+			       0x60A00 0x100>;
+			status = "okay";
+
+			xor00 {
+			      interrupts = <5>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			};
+			xor01 {
+			      interrupts = <6>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			      dmacap,memset;
+			};
+		};
+
+		xor at 60900 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60900 0x100
+			       0xd0B00 0x100>;
+			status = "okay";
+
+			xor00 {
+			      interrupts = <7>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			};
+			xor01 {
+			      interrupts = <8>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			      dmacap,memset;
+			};
+		};
+
 		sata at 80000 {
 			compatible = "marvell,orion-sata";
 			reg = <0x80000 0x5000>;
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index d94872f..e62f10de 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -34,6 +34,8 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
 	OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL),
 	OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL),
+	OF_DEV_AUXDATA("marvell,orion-xor", 0xf1060800, "mv_xor.0", NULL),
+	OF_DEV_AUXDATA("marvell,orion-xor", 0xf1060900, "mv_xor.1", NULL),
 	{},
 };
 
@@ -56,10 +58,6 @@ static void __init kirkwood_dt_init(void)
 	/* Setup root of clk tree */
 	kirkwood_clk_init();
 
-	/* internal devices that every board has */
-	kirkwood_xor0_init();
-	kirkwood_xor1_init();
-
 #ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
 #endif
-- 
1.7.10.4

  reply	other threads:[~2012-11-18 10:44 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-18 10:44 [PATCH v2 1/2] DMA: mv_xor: Add a device_control function Andrew Lunn
2012-11-18 10:44 ` Andrew Lunn [this message]
2012-11-18 17:40   ` [PATCH v2 2/2] ARM: Kirkwood: Convert XOR instantiation to DT Thomas Petazzoni
2012-11-18 18:27     ` Andrew Lunn
2012-11-19  6:37   ` Jason Cooper
2012-11-19  6:41     ` Andrew Lunn
2012-11-19  6:54       ` Jason Cooper
2012-11-18 17:40 ` [PATCH v2 1/2] DMA: mv_xor: Add a device_control function Thomas Petazzoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1353235498-22638-2-git-send-email-andrew@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).