* [PATCH RESEND] ARM: dts: AM33XX: Rename I2C and GPIO nodes
@ 2012-11-21 11:52 AnilKumar Ch
2012-11-21 12:47 ` Peter Korsgaard
2013-01-02 10:12 ` AnilKumar, Chimata
0 siblings, 2 replies; 6+ messages in thread
From: AnilKumar Ch @ 2012-11-21 11:52 UTC (permalink / raw)
To: linux-arm-kernel
Rename I2C and GPIO nodes according to AM33XX TRM. According to
AM33XX TRM device instances are starting from "0" like i2c0, i2c1
and i2c3.
Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
[panto at antoniou-consulting.com: initial patch by pantelis's]
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
---
Changes from first version:
- Updated pantelis's patch
* Modified based on linux-omap/master
* Added GPIO nodes renaming as well
arch/arm/boot/dts/am335x-bone.dts | 10 +++++-----
arch/arm/boot/dts/am335x-evm.dts | 18 +++++++++---------
arch/arm/boot/dts/am335x-evmsk.dts | 18 +++++++++---------
arch/arm/boot/dts/am33xx.dtsi | 14 +++++++-------
4 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 2c33888..77b4352 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -43,7 +43,7 @@
status = "okay";
};
- i2c1: i2c at 44e0b000 {
+ i2c0: i2c at 44e0b000 {
status = "okay";
clock-frequency = <400000>;
@@ -59,27 +59,27 @@
led at 2 {
label = "beaglebone:green:heartbeat";
- gpios = <&gpio2 21 0>;
+ gpios = <&gpio1 21 0>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led at 3 {
label = "beaglebone:green:mmc0";
- gpios = <&gpio2 22 0>;
+ gpios = <&gpio1 22 0>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led at 4 {
label = "beaglebone:green:usr2";
- gpios = <&gpio2 23 0>;
+ gpios = <&gpio1 23 0>;
default-state = "off";
};
led at 5 {
label = "beaglebone:green:usr3";
- gpios = <&gpio2 24 0>;
+ gpios = <&gpio1 24 0>;
default-state = "off";
};
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 9f65f17..705a9c5 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -51,7 +51,7 @@
status = "okay";
};
- i2c1: i2c at 44e0b000 {
+ i2c0: i2c at 44e0b000 {
status = "okay";
clock-frequency = <400000>;
@@ -60,7 +60,7 @@
};
};
- i2c2: i2c at 4802a000 {
+ i2c1: i2c at 4802a000 {
status = "okay";
clock-frequency = <100000>;
@@ -123,12 +123,12 @@
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
- row-gpios = <&gpio2 25 0 /* Bank1, pin25 */
- &gpio2 26 0 /* Bank1, pin26 */
- &gpio2 27 0>; /* Bank1, pin27 */
+ row-gpios = <&gpio1 25 0 /* Bank1, pin25 */
+ &gpio1 26 0 /* Bank1, pin26 */
+ &gpio1 27 0>; /* Bank1, pin27 */
- col-gpios = <&gpio2 21 0 /* Bank1, pin21 */
- &gpio2 22 0>; /* Bank1, pin22 */
+ col-gpios = <&gpio1 21 0 /* Bank1, pin21 */
+ &gpio1 22 0>; /* Bank1, pin22 */
linux,keymap = <0x0000008b /* MENU */
0x0100009e /* BACK */
@@ -147,14 +147,14 @@
switch@9 {
label = "volume-up";
linux,code = <115>;
- gpios = <&gpio1 2 1>;
+ gpios = <&gpio0 2 1>;
gpio-key,wakeup;
};
switch at 10 {
label = "volume-down";
linux,code = <114>;
- gpios = <&gpio1 3 1>;
+ gpios = <&gpio0 3 1>;
gpio-key,wakeup;
};
};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index f5a6162..f67c360 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -58,7 +58,7 @@
status = "okay";
};
- i2c1: i2c at 44e0b000 {
+ i2c0: i2c at 44e0b000 {
status = "okay";
clock-frequency = <400000>;
@@ -115,26 +115,26 @@
led at 1 {
label = "evmsk:green:usr0";
- gpios = <&gpio2 4 0>;
+ gpios = <&gpio1 4 0>;
default-state = "off";
};
led at 2 {
label = "evmsk:green:usr1";
- gpios = <&gpio2 5 0>;
+ gpios = <&gpio1 5 0>;
default-state = "off";
};
led at 3 {
label = "evmsk:green:mmc0";
- gpios = <&gpio2 6 0>;
+ gpios = <&gpio1 6 0>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led at 4 {
label = "evmsk:green:heartbeat";
- gpios = <&gpio2 7 0>;
+ gpios = <&gpio1 7 0>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
@@ -148,26 +148,26 @@
switch at 1 {
label = "button0";
linux,code = <0x100>;
- gpios = <&gpio3 3 0>;
+ gpios = <&gpio2 3 0>;
};
switch at 2 {
label = "button1";
linux,code = <0x101>;
- gpios = <&gpio3 2 0>;
+ gpios = <&gpio2 2 0>;
};
switch at 3 {
label = "button2";
linux,code = <0x102>;
- gpios = <&gpio1 30 0>;
+ gpios = <&gpio0 30 0>;
gpio-key,wakeup;
};
switch at 4 {
label = "button3";
linux,code = <0x103>;
- gpios = <&gpio3 5 0>;
+ gpios = <&gpio2 5 0>;
};
};
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 5dfd682..2ad01c7 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -87,7 +87,7 @@
reg = <0x48200000 0x1000>;
};
- gpio1: gpio at 44e07000 {
+ gpio0: gpio at 44e07000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio1";
gpio-controller;
@@ -98,7 +98,7 @@
interrupts = <96>;
};
- gpio2: gpio at 4804c000 {
+ gpio1: gpio at 4804c000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
gpio-controller;
@@ -109,7 +109,7 @@
interrupts = <98>;
};
- gpio3: gpio at 481ac000 {
+ gpio2: gpio at 481ac000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio3";
gpio-controller;
@@ -120,7 +120,7 @@
interrupts = <32>;
};
- gpio4: gpio at 481ae000 {
+ gpio3: gpio at 481ae000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
gpio-controller;
@@ -185,7 +185,7 @@
status = "disabled";
};
- i2c1: i2c at 44e0b000 {
+ i2c0: i2c at 44e0b000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -195,7 +195,7 @@
status = "disabled";
};
- i2c2: i2c at 4802a000 {
+ i2c1: i2c at 4802a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -205,7 +205,7 @@
status = "disabled";
};
- i2c3: i2c at 4819c000 {
+ i2c2: i2c at 4819c000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH RESEND] ARM: dts: AM33XX: Rename I2C and GPIO nodes
2012-11-21 11:52 [PATCH RESEND] ARM: dts: AM33XX: Rename I2C and GPIO nodes AnilKumar Ch
@ 2012-11-21 12:47 ` Peter Korsgaard
2013-01-02 10:12 ` AnilKumar, Chimata
1 sibling, 0 replies; 6+ messages in thread
From: Peter Korsgaard @ 2012-11-21 12:47 UTC (permalink / raw)
To: linux-arm-kernel
>>>>> "A" == AnilKumar Ch <anilkumar@ti.com> writes:
A> Rename I2C and GPIO nodes according to AM33XX TRM. According to
A> AM33XX TRM device instances are starting from "0" like i2c0, i2c1
A> and i2c3.
A> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
A> [panto at antoniou-consulting.com: initial patch by pantelis's]
A> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Thanks!
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH RESEND] ARM: dts: AM33XX: Rename I2C and GPIO nodes
2012-11-21 11:52 [PATCH RESEND] ARM: dts: AM33XX: Rename I2C and GPIO nodes AnilKumar Ch
2012-11-21 12:47 ` Peter Korsgaard
@ 2013-01-02 10:12 ` AnilKumar, Chimata
2013-01-08 9:30 ` Peter Korsgaard
2013-01-08 16:13 ` Benoit Cousson
1 sibling, 2 replies; 6+ messages in thread
From: AnilKumar, Chimata @ 2013-01-02 10:12 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 21, 2012 at 17:22:17, AnilKumar, Chimata wrote:
> Rename I2C and GPIO nodes according to AM33XX TRM. According to
> AM33XX TRM device instances are starting from "0" like i2c0, i2c1
> and i2c3.
>
> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
> [panto at antoniou-consulting.com: initial patch by pantelis's]
> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
> ---
> Changes from first version:
> - Updated pantelis's patch
> * Modified based on linux-omap/master
> * Added GPIO nodes renaming as well
Hi Tony/Benoit,
If there are no comments could you please pull this patch?
Thanks
AnilKumar
> arch/arm/boot/dts/am335x-bone.dts | 10 +++++-----
> arch/arm/boot/dts/am335x-evm.dts | 18 +++++++++---------
> arch/arm/boot/dts/am335x-evmsk.dts | 18 +++++++++---------
> arch/arm/boot/dts/am33xx.dtsi | 14 +++++++-------
> 4 files changed, 30 insertions(+), 30 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
> index 2c33888..77b4352 100644
> --- a/arch/arm/boot/dts/am335x-bone.dts
> +++ b/arch/arm/boot/dts/am335x-bone.dts
> @@ -43,7 +43,7 @@
> status = "okay";
> };
>
> - i2c1: i2c at 44e0b000 {
> + i2c0: i2c at 44e0b000 {
> status = "okay";
> clock-frequency = <400000>;
>
> @@ -59,27 +59,27 @@
>
> led at 2 {
> label = "beaglebone:green:heartbeat";
> - gpios = <&gpio2 21 0>;
> + gpios = <&gpio1 21 0>;
> linux,default-trigger = "heartbeat";
> default-state = "off";
> };
>
> led at 3 {
> label = "beaglebone:green:mmc0";
> - gpios = <&gpio2 22 0>;
> + gpios = <&gpio1 22 0>;
> linux,default-trigger = "mmc0";
> default-state = "off";
> };
>
> led at 4 {
> label = "beaglebone:green:usr2";
> - gpios = <&gpio2 23 0>;
> + gpios = <&gpio1 23 0>;
> default-state = "off";
> };
>
> led at 5 {
> label = "beaglebone:green:usr3";
> - gpios = <&gpio2 24 0>;
> + gpios = <&gpio1 24 0>;
> default-state = "off";
> };
> };
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index 9f65f17..705a9c5 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -51,7 +51,7 @@
> status = "okay";
> };
>
> - i2c1: i2c at 44e0b000 {
> + i2c0: i2c at 44e0b000 {
> status = "okay";
> clock-frequency = <400000>;
>
> @@ -60,7 +60,7 @@
> };
> };
>
> - i2c2: i2c at 4802a000 {
> + i2c1: i2c at 4802a000 {
> status = "okay";
> clock-frequency = <100000>;
>
> @@ -123,12 +123,12 @@
> debounce-delay-ms = <5>;
> col-scan-delay-us = <2>;
>
> - row-gpios = <&gpio2 25 0 /* Bank1, pin25 */
> - &gpio2 26 0 /* Bank1, pin26 */
> - &gpio2 27 0>; /* Bank1, pin27 */
> + row-gpios = <&gpio1 25 0 /* Bank1, pin25 */
> + &gpio1 26 0 /* Bank1, pin26 */
> + &gpio1 27 0>; /* Bank1, pin27 */
>
> - col-gpios = <&gpio2 21 0 /* Bank1, pin21 */
> - &gpio2 22 0>; /* Bank1, pin22 */
> + col-gpios = <&gpio1 21 0 /* Bank1, pin21 */
> + &gpio1 22 0>; /* Bank1, pin22 */
>
> linux,keymap = <0x0000008b /* MENU */
> 0x0100009e /* BACK */
> @@ -147,14 +147,14 @@
> switch at 9 {
> label = "volume-up";
> linux,code = <115>;
> - gpios = <&gpio1 2 1>;
> + gpios = <&gpio0 2 1>;
> gpio-key,wakeup;
> };
>
> switch at 10 {
> label = "volume-down";
> linux,code = <114>;
> - gpios = <&gpio1 3 1>;
> + gpios = <&gpio0 3 1>;
> gpio-key,wakeup;
> };
> };
> diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
> index f5a6162..f67c360 100644
> --- a/arch/arm/boot/dts/am335x-evmsk.dts
> +++ b/arch/arm/boot/dts/am335x-evmsk.dts
> @@ -58,7 +58,7 @@
> status = "okay";
> };
>
> - i2c1: i2c at 44e0b000 {
> + i2c0: i2c at 44e0b000 {
> status = "okay";
> clock-frequency = <400000>;
>
> @@ -115,26 +115,26 @@
>
> led at 1 {
> label = "evmsk:green:usr0";
> - gpios = <&gpio2 4 0>;
> + gpios = <&gpio1 4 0>;
> default-state = "off";
> };
>
> led at 2 {
> label = "evmsk:green:usr1";
> - gpios = <&gpio2 5 0>;
> + gpios = <&gpio1 5 0>;
> default-state = "off";
> };
>
> led at 3 {
> label = "evmsk:green:mmc0";
> - gpios = <&gpio2 6 0>;
> + gpios = <&gpio1 6 0>;
> linux,default-trigger = "mmc0";
> default-state = "off";
> };
>
> led at 4 {
> label = "evmsk:green:heartbeat";
> - gpios = <&gpio2 7 0>;
> + gpios = <&gpio1 7 0>;
> linux,default-trigger = "heartbeat";
> default-state = "off";
> };
> @@ -148,26 +148,26 @@
> switch at 1 {
> label = "button0";
> linux,code = <0x100>;
> - gpios = <&gpio3 3 0>;
> + gpios = <&gpio2 3 0>;
> };
>
> switch at 2 {
> label = "button1";
> linux,code = <0x101>;
> - gpios = <&gpio3 2 0>;
> + gpios = <&gpio2 2 0>;
> };
>
> switch at 3 {
> label = "button2";
> linux,code = <0x102>;
> - gpios = <&gpio1 30 0>;
> + gpios = <&gpio0 30 0>;
> gpio-key,wakeup;
> };
>
> switch at 4 {
> label = "button3";
> linux,code = <0x103>;
> - gpios = <&gpio3 5 0>;
> + gpios = <&gpio2 5 0>;
> };
> };
> };
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 5dfd682..2ad01c7 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -87,7 +87,7 @@
> reg = <0x48200000 0x1000>;
> };
>
> - gpio1: gpio at 44e07000 {
> + gpio0: gpio at 44e07000 {
> compatible = "ti,omap4-gpio";
> ti,hwmods = "gpio1";
> gpio-controller;
> @@ -98,7 +98,7 @@
> interrupts = <96>;
> };
>
> - gpio2: gpio at 4804c000 {
> + gpio1: gpio at 4804c000 {
> compatible = "ti,omap4-gpio";
> ti,hwmods = "gpio2";
> gpio-controller;
> @@ -109,7 +109,7 @@
> interrupts = <98>;
> };
>
> - gpio3: gpio at 481ac000 {
> + gpio2: gpio at 481ac000 {
> compatible = "ti,omap4-gpio";
> ti,hwmods = "gpio3";
> gpio-controller;
> @@ -120,7 +120,7 @@
> interrupts = <32>;
> };
>
> - gpio4: gpio at 481ae000 {
> + gpio3: gpio at 481ae000 {
> compatible = "ti,omap4-gpio";
> ti,hwmods = "gpio4";
> gpio-controller;
> @@ -185,7 +185,7 @@
> status = "disabled";
> };
>
> - i2c1: i2c at 44e0b000 {
> + i2c0: i2c at 44e0b000 {
> compatible = "ti,omap4-i2c";
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -195,7 +195,7 @@
> status = "disabled";
> };
>
> - i2c2: i2c at 4802a000 {
> + i2c1: i2c at 4802a000 {
> compatible = "ti,omap4-i2c";
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -205,7 +205,7 @@
> status = "disabled";
> };
>
> - i2c3: i2c at 4819c000 {
> + i2c2: i2c at 4819c000 {
> compatible = "ti,omap4-i2c";
> #address-cells = <1>;
> #size-cells = <0>;
> --
> 1.7.9.5
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH RESEND] ARM: dts: AM33XX: Rename I2C and GPIO nodes
2013-01-02 10:12 ` AnilKumar, Chimata
@ 2013-01-08 9:30 ` Peter Korsgaard
2013-01-08 16:13 ` Benoit Cousson
1 sibling, 0 replies; 6+ messages in thread
From: Peter Korsgaard @ 2013-01-08 9:30 UTC (permalink / raw)
To: linux-arm-kernel
>>>>> "AnilKumar" == AnilKumar, Chimata <anilkumar@ti.com> writes:
AnilKumar> On Wed, Nov 21, 2012 at 17:22:17, AnilKumar, Chimata wrote:
>> Rename I2C and GPIO nodes according to AM33XX TRM. According to
>> AM33XX TRM device instances are starting from "0" like i2c0, i2c1
>> and i2c3.
>>
>> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
>> [panto at antoniou-consulting.com: initial patch by pantelis's]
>> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
>> ---
>> Changes from first version:
>> - Updated pantelis's patch
>> * Modified based on linux-omap/master
>> * Added GPIO nodes renaming as well
AnilKumar> Hi Tony/Benoit,
AnilKumar> If there are no comments could you please pull this patch?
Yes, please do.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH RESEND] ARM: dts: AM33XX: Rename I2C and GPIO nodes
2013-01-02 10:12 ` AnilKumar, Chimata
2013-01-08 9:30 ` Peter Korsgaard
@ 2013-01-08 16:13 ` Benoit Cousson
2013-01-09 9:41 ` Pantelis Antoniou
1 sibling, 1 reply; 6+ messages in thread
From: Benoit Cousson @ 2013-01-08 16:13 UTC (permalink / raw)
To: linux-arm-kernel
Hi Anil,
On 01/02/2013 11:12 AM, AnilKumar, Chimata wrote:
> On Wed, Nov 21, 2012 at 17:22:17, AnilKumar, Chimata wrote:
>> Rename I2C and GPIO nodes according to AM33XX TRM. According to
>> AM33XX TRM device instances are starting from "0" like i2c0, i2c1
>> and i2c3.
>>
>> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
>> [panto at antoniou-consulting.com: initial patch by pantelis's]
>> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
>> ---
>> Changes from first version:
>> - Updated pantelis's patch
>> * Modified based on linux-omap/master
>> * Added GPIO nodes renaming as well
>
> Hi Tony/Benoit,
>
> If there are no comments could you please pull this patch?
Yep, it is done.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.9/dts
Regards,
Benoit
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH RESEND] ARM: dts: AM33XX: Rename I2C and GPIO nodes
2013-01-08 16:13 ` Benoit Cousson
@ 2013-01-09 9:41 ` Pantelis Antoniou
0 siblings, 0 replies; 6+ messages in thread
From: Pantelis Antoniou @ 2013-01-09 9:41 UTC (permalink / raw)
To: linux-arm-kernel
Hi Benoit,
On Jan 8, 2013, at 6:13 PM, Benoit Cousson wrote:
> Hi Anil,
>
> On 01/02/2013 11:12 AM, AnilKumar, Chimata wrote:
>> On Wed, Nov 21, 2012 at 17:22:17, AnilKumar, Chimata wrote:
>>> Rename I2C and GPIO nodes according to AM33XX TRM. According to
>>> AM33XX TRM device instances are starting from "0" like i2c0, i2c1
>>> and i2c3.
>>>
>>> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
>>> [panto at antoniou-consulting.com: initial patch by pantelis's]
>>> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
>>> ---
>>> Changes from first version:
>>> - Updated pantelis's patch
>>> * Modified based on linux-omap/master
>>> * Added GPIO nodes renaming as well
>>
>> Hi Tony/Benoit,
>>
>> If there are no comments could you please pull this patch?
>
> Yep, it is done.
>
> The patch is available here:
> git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.9/dts
>
> Regards,
> Benoit
>
Note that when this lands in mainline, the DT patch bindings for DT overlays
must be converted to the correct form.
Regards
-- Pantelis
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-01-09 9:41 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-11-21 11:52 [PATCH RESEND] ARM: dts: AM33XX: Rename I2C and GPIO nodes AnilKumar Ch
2012-11-21 12:47 ` Peter Korsgaard
2013-01-02 10:12 ` AnilKumar, Chimata
2013-01-08 9:30 ` Peter Korsgaard
2013-01-08 16:13 ` Benoit Cousson
2013-01-09 9:41 ` Pantelis Antoniou
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).