From: xiechao.mail@gmail.com (Chao Xie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 12/29] usb: otg: mv_otg: use PHY driver for otg
Date: Wed, 21 Nov 2012 21:04:53 -0500 [thread overview]
Message-ID: <1353549910-988-12-git-send-email-xiechao.mail@gmail.com> (raw)
In-Reply-To: <1353549910-988-1-git-send-email-xiechao.mail@gmail.com>
From: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
---
drivers/usb/otg/mv_otg.c | 33 ++++++++++++---------------------
drivers/usb/otg/mv_otg.h | 2 +-
2 files changed, 13 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index ffc0689..344f246 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -25,6 +25,7 @@
#include <linux/usb/otg.h>
#include <linux/usb/gadget.h>
#include <linux/usb/hcd.h>
+#include <linux/usb/mv_usb2.h>
#include <linux/platform_data/mv_usb.h>
#include "mv_otg.h"
@@ -261,8 +262,8 @@ static int mv_otg_enable_internal(struct mv_otg *mvotg)
dev_dbg(&mvotg->pdev->dev, "otg enabled\n");
otg_clock_enable(mvotg);
- if (mvotg->pdata->phy_init) {
- retval = mvotg->pdata->phy_init(mvotg->phy_regs);
+ if (mvotg->mvphy->init) {
+ retval = mvotg->mvphy->init(mvotg->mvphy);
if (retval) {
dev_err(&mvotg->pdev->dev,
"init phy error %d\n", retval);
@@ -288,8 +289,8 @@ static void mv_otg_disable_internal(struct mv_otg *mvotg)
{
if (mvotg->active) {
dev_dbg(&mvotg->pdev->dev, "otg disabled\n");
- if (mvotg->pdata->phy_deinit)
- mvotg->pdata->phy_deinit(mvotg->phy_regs);
+ if (mvotg->mvphy->shutdown)
+ mvotg->mvphy->shutdown(mvotg->mvphy);
otg_clock_disable(mvotg);
mvotg->active = 0;
}
@@ -741,23 +742,8 @@ static int mv_otg_probe(struct platform_device *pdev)
for (i = 0; i < OTG_TIMER_NUM; i++)
init_timer(&mvotg->otg_ctrl.timer[i]);
- r = platform_get_resource_byname(mvotg->pdev,
- IORESOURCE_MEM, "phyregs");
- if (r == NULL) {
- dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
- retval = -ENODEV;
- goto err_destroy_workqueue;
- }
-
- mvotg->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
- if (mvotg->phy_regs == NULL) {
- dev_err(&pdev->dev, "failed to map phy I/O memory\n");
- retval = -EFAULT;
- goto err_destroy_workqueue;
- }
-
- r = platform_get_resource_byname(mvotg->pdev,
- IORESOURCE_MEM, "capregs");
+ r = platform_get_resource(mvotg->pdev,
+ IORESOURCE_MEM, 0);
if (r == NULL) {
dev_err(&pdev->dev, "no I/O memory resource defined\n");
retval = -ENODEV;
@@ -770,6 +756,11 @@ static int mv_otg_probe(struct platform_device *pdev)
retval = -EFAULT;
goto err_destroy_workqueue;
}
+ mvotg->mvphy = mv_usb2_get_phy();
+ if (mvotg->mvphy == NULL) {
+ retval = -ENODEV;
+ goto err_destroy_workqueue;
+ }
/* we will acces controller register, so enable the udc controller */
retval = mv_otg_enable_internal(mvotg);
diff --git a/drivers/usb/otg/mv_otg.h b/drivers/usb/otg/mv_otg.h
index 8a9e351..7b9629a 100644
--- a/drivers/usb/otg/mv_otg.h
+++ b/drivers/usb/otg/mv_otg.h
@@ -137,10 +137,10 @@ struct mv_otg_regs {
struct mv_otg {
struct usb_phy phy;
+ struct mv_usb2_phy *mvphy;
struct mv_otg_ctrl otg_ctrl;
/* base address */
- void __iomem *phy_regs;
void __iomem *cap_regs;
struct mv_otg_regs __iomem *op_regs;
--
1.7.4.1
next prev parent reply other threads:[~2012-11-22 2:04 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-22 2:04 [PATCH 01/29] usb: gadget: mv_udc: use udc_start and udc_stop functions Chao Xie
2012-11-22 2:04 ` [PATCH 02/29] usb: gadget: mv_udc: use devm_xxx for probe Chao Xie
2012-11-22 2:04 ` [PATCH 03/29] usb: gadget: mv_udc: fix the clk APIs Chao Xie
2012-11-22 2:04 ` [PATCH 04/29] usb: otg: mv_otg: use devm_xxx for probe Chao Xie
2012-11-22 2:04 ` [PATCH 05/29] usb: otg: mv_otg: fix the clk APIs Chao Xie
2012-11-22 2:04 ` [PATCH 06/29] usb: host: ehci-mv: fix " Chao Xie
2012-11-23 16:06 ` Alan Stern
2012-11-22 2:04 ` [PATCH 07/29] usb: host: ehci-mv: remove unused variable Chao Xie
2012-11-22 2:04 ` [PATCH 08/29] usb: gadget: mv_udc: fix the value of tranceiver Chao Xie
2012-11-22 2:04 ` [PATCH 09/29] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller Chao Xie
2012-11-22 2:04 ` [PATCH 10/29] usb: gadget: mv_udc: use PHY driver for udc Chao Xie
2012-11-22 2:04 ` [PATCH 11/29] usb: ehci: ehci-mv: use PHY driver for ehci Chao Xie
2012-11-22 2:04 ` Chao Xie [this message]
2012-11-22 2:04 ` [PATCH 13/29] arm: mmp2: change the defintion of usb devices Chao Xie
2012-11-22 2:04 ` [PATCH 14/29] arm: pxa910: " Chao Xie
2012-11-22 2:04 ` [PATCH 15/29] arm: brownstone: add usb support for the board Chao Xie
2012-11-22 2:04 ` [PATCH 16/29] arm: ttc_dkb: add usb support Chao Xie
2012-11-22 2:04 ` [PATCH 17/29] arm: mmp: remove the usb phy setting Chao Xie
2012-11-22 2:04 ` [PATCH 18/29] arm: mmp: remove usb devices from pxa168 Chao Xie
2012-11-22 2:05 ` [PATCH 19/29] usb: phy: mv_usb2_phy: add externel chip support Chao Xie
2012-11-22 2:05 ` [PATCH 20/29] usb: gadget: mv_udc: add extern " Chao Xie
2012-11-22 2:05 ` [PATCH 21/29] usb: ehci: ehci-mv: " Chao Xie
2012-11-22 2:05 ` [PATCH 22/29] usb: otg: mv_otg: " Chao Xie
2012-11-22 2:05 ` [PATCH 23/29] arm: mmp: add extern chip support for brownstone Chao Xie
2012-11-22 2:05 ` [PATCH 24/29] arm: mmp: add extern chip support for ttc_dkb Chao Xie
2012-11-22 2:05 ` [PATCH 25/29] usb: gadget: mv_udc: add device tree support Chao Xie
2012-11-22 2:05 ` [PATCH 26/29] usb: otg: mv_otg: " Chao Xie
2012-11-22 2:05 ` [PATCH 27/29] usb: ehci: ehci-mv: " Chao Xie
2012-11-22 2:05 ` [PATCH 28/29] arm: mmp: devicetree: add usb support for mmp2 Chao Xie
2012-11-22 2:05 ` [PATCH 29/29] arm: mmp: devicetree: add usb support for pxa910_dkb Chao Xie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353549910-988-12-git-send-email-xiechao.mail@gmail.com \
--to=xiechao.mail@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).