From: xiechao.mail@gmail.com (Chao Xie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 15/29] arm: brownstone: add usb support for the board
Date: Wed, 21 Nov 2012 21:04:56 -0500 [thread overview]
Message-ID: <1353549910-988-15-git-send-email-xiechao.mail@gmail.com> (raw)
In-Reply-To: <1353549910-988-1-git-send-email-xiechao.mail@gmail.com>
From: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
---
arch/arm/mach-mmp/brownstone.c | 47 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 47 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index 5cb769c..90c0340 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -18,6 +18,7 @@
#include <linux/regulator/max8649.h>
#include <linux/regulator/fixed.h>
#include <linux/mfd/max8925.h>
+#include <linux/platform_data/mv_usb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -195,6 +196,31 @@ static struct sram_platdata mmp2_isram_platdata = {
.granularity = SRAM_GRANULARITY,
};
+#ifdef CONFIG_USB_SUPPORT
+
+static char *mmp2_usb_clock_name[] = {
+ [0] = "usb_clk",
+};
+
+static struct mv_usb_phy_platform_data brownstone_usb_phy_pdata = {
+ .clknum = 1,
+ .clkname = mmp2_usb_clock_name,
+};
+
+#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O)
+
+static struct mv_usb_platform_data brownstone_usb_pdata = {
+ .clknum = 1,
+ .clkname = mmp2_usb_clock_name,
+ .vbus = NULL,
+ .mode = MV_USB_MODE_OTG,
+ .otg_force_a_bus_req = 1,
+ .set_vbus = NULL,
+};
+#endif
+#endif
+
+
static void __init brownstone_init(void)
{
mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));
@@ -211,6 +237,27 @@ static void __init brownstone_init(void)
/* enable 5v regulator */
platform_device_register(&brownstone_v_5vp_device);
+
+#ifdef CONFIG_USB_SUPPORT
+ pxa_register_device(&mmp2_device_u2ophy, &brownstone_usb_phy_pdata,
+ sizeof(brownstone_usb_phy_pdata));
+#endif
+
+#ifdef CONFIG_USB_MV_UDC
+ pxa_register_device(&mmp2_device_u2o, &brownstone_usb_pdata,
+ sizeof(brownstone_usb_pdata));
+#endif
+
+#ifdef CONFIG_USB_EHCI_MV_U2O
+ pxa_register_device(&mmp2_device_u2oehci, &brownstone_usb_pdata,
+ sizeof(brownstone_usb_pdata));
+#endif
+
+#ifdef CONFIG_USB_MV_OTG
+ pxa_register_device(&mmp2_device_u2ootg, &brownstone_usb_pdata,
+ sizeof(brownstone_usb_pdata));
+#endif
+
}
MACHINE_START(BROWNSTONE, "Brownstone Development Platform")
--
1.7.4.1
next prev parent reply other threads:[~2012-11-22 2:04 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-22 2:04 [PATCH 01/29] usb: gadget: mv_udc: use udc_start and udc_stop functions Chao Xie
2012-11-22 2:04 ` [PATCH 02/29] usb: gadget: mv_udc: use devm_xxx for probe Chao Xie
2012-11-22 2:04 ` [PATCH 03/29] usb: gadget: mv_udc: fix the clk APIs Chao Xie
2012-11-22 2:04 ` [PATCH 04/29] usb: otg: mv_otg: use devm_xxx for probe Chao Xie
2012-11-22 2:04 ` [PATCH 05/29] usb: otg: mv_otg: fix the clk APIs Chao Xie
2012-11-22 2:04 ` [PATCH 06/29] usb: host: ehci-mv: fix " Chao Xie
2012-11-23 16:06 ` Alan Stern
2012-11-22 2:04 ` [PATCH 07/29] usb: host: ehci-mv: remove unused variable Chao Xie
2012-11-22 2:04 ` [PATCH 08/29] usb: gadget: mv_udc: fix the value of tranceiver Chao Xie
2012-11-22 2:04 ` [PATCH 09/29] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller Chao Xie
2012-11-22 2:04 ` [PATCH 10/29] usb: gadget: mv_udc: use PHY driver for udc Chao Xie
2012-11-22 2:04 ` [PATCH 11/29] usb: ehci: ehci-mv: use PHY driver for ehci Chao Xie
2012-11-22 2:04 ` [PATCH 12/29] usb: otg: mv_otg: use PHY driver for otg Chao Xie
2012-11-22 2:04 ` [PATCH 13/29] arm: mmp2: change the defintion of usb devices Chao Xie
2012-11-22 2:04 ` [PATCH 14/29] arm: pxa910: " Chao Xie
2012-11-22 2:04 ` Chao Xie [this message]
2012-11-22 2:04 ` [PATCH 16/29] arm: ttc_dkb: add usb support Chao Xie
2012-11-22 2:04 ` [PATCH 17/29] arm: mmp: remove the usb phy setting Chao Xie
2012-11-22 2:04 ` [PATCH 18/29] arm: mmp: remove usb devices from pxa168 Chao Xie
2012-11-22 2:05 ` [PATCH 19/29] usb: phy: mv_usb2_phy: add externel chip support Chao Xie
2012-11-22 2:05 ` [PATCH 20/29] usb: gadget: mv_udc: add extern " Chao Xie
2012-11-22 2:05 ` [PATCH 21/29] usb: ehci: ehci-mv: " Chao Xie
2012-11-22 2:05 ` [PATCH 22/29] usb: otg: mv_otg: " Chao Xie
2012-11-22 2:05 ` [PATCH 23/29] arm: mmp: add extern chip support for brownstone Chao Xie
2012-11-22 2:05 ` [PATCH 24/29] arm: mmp: add extern chip support for ttc_dkb Chao Xie
2012-11-22 2:05 ` [PATCH 25/29] usb: gadget: mv_udc: add device tree support Chao Xie
2012-11-22 2:05 ` [PATCH 26/29] usb: otg: mv_otg: " Chao Xie
2012-11-22 2:05 ` [PATCH 27/29] usb: ehci: ehci-mv: " Chao Xie
2012-11-22 2:05 ` [PATCH 28/29] arm: mmp: devicetree: add usb support for mmp2 Chao Xie
2012-11-22 2:05 ` [PATCH 29/29] arm: mmp: devicetree: add usb support for pxa910_dkb Chao Xie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353549910-988-15-git-send-email-xiechao.mail@gmail.com \
--to=xiechao.mail@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).