From mboxrd@z Thu Jan  1 00:00:00 1970
From: xiechao.mail@gmail.com (Chao Xie)
Date: Wed, 21 Nov 2012 21:04:58 -0500
Subject: [PATCH 17/29] arm: mmp: remove the usb phy setting
In-Reply-To: <1353549910-988-1-git-send-email-xiechao.mail@gmail.com>
References: <1353549910-988-1-git-send-email-xiechao.mail@gmail.com>
Message-ID: <1353549910-988-17-git-send-email-xiechao.mail@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

From: Chao Xie <chao.xie@marvell.com>

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
---
 arch/arm/mach-mmp/devices.c               |  278 -----------------------------
 arch/arm/mach-mmp/include/mach/regs-usb.h |  253 --------------------------
 2 files changed, 0 insertions(+), 531 deletions(-)
 delete mode 100644 arch/arm/mach-mmp/include/mach/regs-usb.h

diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index dd2d8b1..af341e5 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -15,7 +15,6 @@
 #include <mach/irqs.h>
 #include <mach/devices.h>
 #include <mach/cputype.h>
-#include <mach/regs-usb.h>
 
 int __init pxa_register_device(struct pxa_device_desc *desc,
 				void *data, size_t size)
@@ -72,280 +71,3 @@ int __init pxa_register_device(struct pxa_device_desc *desc,
 	return platform_device_add(pdev);
 }
 
-#if defined(CONFIG_USB) || defined(CONFIG_USB_GADGET)
-
-/*****************************************************************************
- * The registers read/write routines
- *****************************************************************************/
-
-static unsigned int u2o_get(void __iomem *base, unsigned int offset)
-{
-	return readl_relaxed(base + offset);
-}
-
-static void u2o_set(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	u32 reg;
-
-	reg = readl_relaxed(base + offset);
-	reg |= value;
-	writel_relaxed(reg, base + offset);
-	readl_relaxed(base + offset);
-}
-
-static void u2o_clear(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	u32 reg;
-
-	reg = readl_relaxed(base + offset);
-	reg &= ~value;
-	writel_relaxed(reg, base + offset);
-	readl_relaxed(base + offset);
-}
-
-static void u2o_write(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	writel_relaxed(value, base + offset);
-	readl_relaxed(base + offset);
-}
-
-#if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV)
-
-#if defined(CONFIG_CPU_PXA910) || defined(CONFIG_CPU_PXA168)
-
-static DEFINE_MUTEX(phy_lock);
-static int phy_init_cnt;
-
-static int usb_phy_init_internal(void __iomem *base)
-{
-	int loops;
-
-	pr_info("Init usb phy!!!\n");
-
-	/* Initialize the USB PHY power */
-	if (cpu_is_pxa910()) {
-		u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
-			| (1<<UTMI_CTRL_PU_REF_SHIFT));
-	}
-
-	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
-	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
-
-	/* UTMI_PLL settings */
-	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
-		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
-		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
-		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
-
-	u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
-		| 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
-		| 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
-		| 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
-
-	/* UTMI_TX */
-	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
-		| UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
-		| UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
-		| UTMI_TX_AMP_MASK);
-	u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
-		| 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
-		| 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
-
-	/* UTMI_RX */
-	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
-		| UTMI_REG_SQ_LENGTH_MASK);
-	u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
-		| 2<<UTMI_REG_SQ_LENGTH_SHIFT);
-
-	/* UTMI_IVREF */
-	if (cpu_is_pxa168())
-		/* fixing Microsoft Altair board interface with NEC hub issue -
-		 * Set UTMI_IVREF from 0x4a3 to 0x4bf */
-		u2o_write(base, UTMI_IVREF, 0x4bf);
-
-	/* toggle VCOCAL_START bit of UTMI_PLL */
-	udelay(200);
-	u2o_set(base, UTMI_PLL, VCOCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_PLL, VCOCAL_START);
-
-	/* toggle REG_RCAL_START bit of UTMI_TX */
-	udelay(400);
-	u2o_set(base, UTMI_TX, REG_RCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_TX, REG_RCAL_START);
-	udelay(400);
-
-	/* Make sure PHY PLL is ready */
-	loops = 0;
-	while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
-		mdelay(1);
-		loops++;
-		if (loops > 100) {
-			printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n",
-				u2o_get(base, UTMI_PLL));
-			break;
-		}
-	}
-
-	if (cpu_is_pxa168()) {
-		u2o_set(base, UTMI_RESERVE, 1 << 5);
-		/* Turn on UTMI PHY OTG extension */
-		u2o_write(base, UTMI_OTG_ADDON, 1);
-	}
-
-	return 0;
-}
-
-static int usb_phy_deinit_internal(void __iomem *base)
-{
-	pr_info("Deinit usb phy!!!\n");
-
-	if (cpu_is_pxa168())
-		u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
-
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
-	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
-	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
-
-	return 0;
-}
-
-int pxa_usb_phy_init(void __iomem *phy_reg)
-{
-	mutex_lock(&phy_lock);
-	if (phy_init_cnt++ == 0)
-		usb_phy_init_internal(phy_reg);
-	mutex_unlock(&phy_lock);
-	return 0;
-}
-
-void pxa_usb_phy_deinit(void __iomem *phy_reg)
-{
-	WARN_ON(phy_init_cnt == 0);
-
-	mutex_lock(&phy_lock);
-	if (--phy_init_cnt == 0)
-		usb_phy_deinit_internal(phy_reg);
-	mutex_unlock(&phy_lock);
-}
-#endif
-#endif
-#endif
-
-#ifdef CONFIG_USB_SUPPORT
-static u64 usb_dma_mask = ~(u32)0;
-
-#ifdef CONFIG_USB_MV_UDC
-struct resource pxa168_u2o_resources[] = {
-	/* regbase */
-	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* phybase */
-	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2o = {
-	.name		= "mv-udc",
-	.id		= -1,
-	.resource	= pxa168_u2o_resources,
-	.num_resources	= ARRAY_SIZE(pxa168_u2o_resources),
-	.dev		=  {
-		.dma_mask	= &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	}
-};
-#endif /* CONFIG_USB_MV_UDC */
-
-#ifdef CONFIG_USB_EHCI_MV_U2O
-struct resource pxa168_u2oehci_resources[] = {
-	/* regbase */
-	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* phybase */
-	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2oehci = {
-	.name		= "pxa-u2oehci",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &usb_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-
-	.num_resources	= ARRAY_SIZE(pxa168_u2oehci_resources),
-	.resource	= pxa168_u2oehci_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_MV_OTG)
-struct resource pxa168_u2ootg_resources[] = {
-	/* regbase */
-	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* phybase */
-	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2ootg = {
-	.name		= "mv-otg",
-	.id		= -1,
-	.dev  = {
-		.dma_mask          = &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-
-	.num_resources	= ARRAY_SIZE(pxa168_u2ootg_resources),
-	.resource      = pxa168_u2ootg_resources,
-};
-#endif /* CONFIG_USB_MV_OTG */
-
-#endif
diff --git a/arch/arm/mach-mmp/include/mach/regs-usb.h b/arch/arm/mach-mmp/include/mach/regs-usb.h
deleted file mode 100644
index b047bf4..0000000
--- a/arch/arm/mach-mmp/include/mach/regs-usb.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_REGS_USB_H
-#define __ASM_ARCH_REGS_USB_H
-
-#define PXA168_U2O_REGBASE	(0xd4208000)
-#define PXA168_U2O_PHYBASE	(0xd4207000)
-
-#define PXA168_U2H_REGBASE      (0xd4209000)
-#define PXA168_U2H_PHYBASE      (0xd4206000)
-
-#define MMP3_HSIC1_REGBASE	(0xf0001000)
-#define MMP3_HSIC1_PHYBASE	(0xf0001800)
-
-#define MMP3_HSIC2_REGBASE	(0xf0002000)
-#define MMP3_HSIC2_PHYBASE	(0xf0002800)
-
-#define MMP3_FSIC_REGBASE	(0xf0003000)
-#define MMP3_FSIC_PHYBASE	(0xf0003800)
-
-
-#define USB_REG_RANGE		(0x1ff)
-#define USB_PHY_RANGE		(0xff)
-
-/* registers */
-#define U2x_CAPREGS_OFFSET       0x100
-
-/* phy regs */
-#define UTMI_REVISION		0x0
-#define UTMI_CTRL		0x4
-#define UTMI_PLL		0x8
-#define UTMI_TX			0xc
-#define UTMI_RX			0x10
-#define UTMI_IVREF		0x14
-#define UTMI_T0			0x18
-#define UTMI_T1			0x1c
-#define UTMI_T2			0x20
-#define UTMI_T3			0x24
-#define UTMI_T4			0x28
-#define UTMI_T5			0x2c
-#define UTMI_RESERVE		0x30
-#define UTMI_USB_INT		0x34
-#define UTMI_DBG_CTL		0x38
-#define UTMI_OTG_ADDON		0x3c
-
-/* For UTMICTRL Register */
-#define UTMI_CTRL_USB_CLK_EN                    (1 << 31)
-/* pxa168 */
-#define UTMI_CTRL_SUSPEND_SET1                  (1 << 30)
-#define UTMI_CTRL_SUSPEND_SET2                  (1 << 29)
-#define UTMI_CTRL_RXBUF_PDWN                    (1 << 24)
-#define UTMI_CTRL_TXBUF_PDWN                    (1 << 11)
-
-#define UTMI_CTRL_INPKT_DELAY_SHIFT             30
-#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
-#define UTMI_CTRL_PU_REF_SHIFT			20
-#define UTMI_CTRL_ARC_PULLDN_SHIFT              12
-#define UTMI_CTRL_PLL_PWR_UP_SHIFT              1
-#define UTMI_CTRL_PWR_UP_SHIFT                  0
-
-/* For UTMI_PLL Register */
-#define UTMI_PLL_PLLCALI12_SHIFT		29
-#define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)
-
-#define UTMI_PLL_PLLVDD18_SHIFT			27
-#define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)
-
-#define UTMI_PLL_PLLVDD12_SHIFT			25
-#define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)
-
-#define UTMI_PLL_CLK_BLK_EN_SHIFT               24
-#define CLK_BLK_EN                              (0x1 << 24)
-#define PLL_READY                               (0x1 << 23)
-#define KVCO_EXT                                (0x1 << 22)
-#define VCOCAL_START                            (0x1 << 21)
-
-#define UTMI_PLL_KVCO_SHIFT			15
-#define UTMI_PLL_KVCO_MASK                      (0x7 << 15)
-
-#define UTMI_PLL_ICP_SHIFT			12
-#define UTMI_PLL_ICP_MASK                       (0x7 << 12)
-
-#define UTMI_PLL_FBDIV_SHIFT                    4
-#define UTMI_PLL_FBDIV_MASK                     (0xFF << 4)
-
-#define UTMI_PLL_REFDIV_SHIFT                   0
-#define UTMI_PLL_REFDIV_MASK                    (0xF << 0)
-
-/* For UTMI_TX Register */
-#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
-#define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)
-
-#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT	26
-#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		(0x1 << 26)
-
-#define UTMI_TX_TXVDD12_SHIFT                   22
-#define UTMI_TX_TXVDD12_MASK                    (0x3 << 22)
-
-#define UTMI_TX_CK60_PHSEL_SHIFT                17
-#define UTMI_TX_CK60_PHSEL_MASK                 (0xf << 17)
-
-#define UTMI_TX_IMPCAL_VTH_SHIFT                14
-#define UTMI_TX_IMPCAL_VTH_MASK                 (0x7 << 14)
-
-#define REG_RCAL_START                          (0x1 << 12)
-
-#define UTMI_TX_LOW_VDD_EN_SHIFT                11
-
-#define UTMI_TX_AMP_SHIFT			0
-#define UTMI_TX_AMP_MASK			(0x7 << 0)
-
-/* For UTMI_RX Register */
-#define UTMI_REG_SQ_LENGTH_SHIFT                15
-#define UTMI_REG_SQ_LENGTH_MASK                 (0x3 << 15)
-
-#define UTMI_RX_SQ_THRESH_SHIFT                 4
-#define UTMI_RX_SQ_THRESH_MASK                  (0xf << 4)
-
-#define UTMI_OTG_ADDON_OTG_ON			(1 << 0)
-
-/* For MMP3 USB Phy */
-#define USB2_PLL_REG0		0x4
-#define USB2_PLL_REG1		0x8
-#define USB2_TX_REG0		0x10
-#define USB2_TX_REG1		0x14
-#define USB2_TX_REG2		0x18
-#define USB2_RX_REG0		0x20
-#define USB2_RX_REG1		0x24
-#define USB2_RX_REG2		0x28
-#define USB2_ANA_REG0		0x30
-#define USB2_ANA_REG1		0x34
-#define USB2_ANA_REG2		0x38
-#define USB2_DIG_REG0		0x3C
-#define USB2_DIG_REG1		0x40
-#define USB2_DIG_REG2		0x44
-#define USB2_DIG_REG3		0x48
-#define USB2_TEST_REG0		0x4C
-#define USB2_TEST_REG1		0x50
-#define USB2_TEST_REG2		0x54
-#define USB2_CHARGER_REG0	0x58
-#define USB2_OTG_REG0		0x5C
-#define USB2_PHY_MON0		0x60
-#define USB2_RESETVE_REG0	0x64
-#define USB2_ICID_REG0		0x78
-#define USB2_ICID_REG1		0x7C
-
-/* USB2_PLL_REG0 */
-/* This is for Ax stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3		0
-#define USB2_PLL_FBDIV_MASK_MMP3		(0xFF << 0)
-
-#define USB2_PLL_REFDIV_SHIFT_MMP3		8
-#define USB2_PLL_REFDIV_MASK_MMP3		(0xF << 8)
-
-#define USB2_PLL_VDD12_SHIFT_MMP3		12
-#define USB2_PLL_VDD18_SHIFT_MMP3		14
-
-/* This is for B0 stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3_B0		0
-#define USB2_PLL_REFDIV_SHIFT_MMP3_B0		9
-#define USB2_PLL_VDD18_SHIFT_MMP3_B0		14
-#define USB2_PLL_FBDIV_MASK_MMP3_B0		0x01FF
-#define USB2_PLL_REFDIV_MASK_MMP3_B0		0x3E00
-
-#define USB2_PLL_CAL12_SHIFT_MMP3		0
-#define USB2_PLL_CALI12_MASK_MMP3		(0x3 << 0)
-
-#define USB2_PLL_VCOCAL_START_SHIFT_MMP3	2
-
-#define USB2_PLL_KVCO_SHIFT_MMP3		4
-#define USB2_PLL_KVCO_MASK_MMP3			(0x7<<4)
-
-#define USB2_PLL_ICP_SHIFT_MMP3			8
-#define USB2_PLL_ICP_MASK_MMP3			(0x7<<8)
-
-#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3		12
-
-#define USB2_PLL_PU_PLL_SHIFT_MMP3		13
-#define USB2_PLL_PU_PLL_MASK			(0x1 << 13)
-
-#define USB2_PLL_READY_MASK_MMP3		(0x1 << 15)
-
-/* USB2_TX_REG0 */
-#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3		8
-#define USB2_TX_IMPCAL_VTH_MASK_MMP3		(0x7 << 8)
-
-#define USB2_TX_RCAL_START_SHIFT_MMP3		13
-
-/* USB2_TX_REG1 */
-#define USB2_TX_CK60_PHSEL_SHIFT_MMP3		0
-#define USB2_TX_CK60_PHSEL_MASK_MMP3		(0xf << 0)
-
-#define USB2_TX_AMP_SHIFT_MMP3			4
-#define USB2_TX_AMP_MASK_MMP3			(0x7 << 4)
-
-#define USB2_TX_VDD12_SHIFT_MMP3		8
-#define USB2_TX_VDD12_MASK_MMP3			(0x3 << 8)
-
-/* USB2_TX_REG2 */
-#define USB2_TX_DRV_SLEWRATE_SHIFT		10
-
-/* USB2_RX_REG0 */
-#define USB2_RX_SQ_THRESH_SHIFT_MMP3		4
-#define USB2_RX_SQ_THRESH_MASK_MMP3		(0xf << 4)
-
-#define USB2_RX_SQ_LENGTH_SHIFT_MMP3		10
-#define USB2_RX_SQ_LENGTH_MASK_MMP3		(0x3 << 10)
-
-/* USB2_ANA_REG1*/
-#define USB2_ANA_PU_ANA_SHIFT_MMP3		14
-
-/* USB2_OTG_REG0 */
-#define USB2_OTG_PU_OTG_SHIFT_MMP3		3
-
-/* fsic registers */
-#define FSIC_MISC			0x4
-#define FSIC_INT			0x28
-#define FSIC_CTRL			0x30
-
-/* HSIC registers */
-#define HSIC_PAD_CTRL			0x4
-
-#define HSIC_CTRL			0x8
-#define HSIC_CTRL_HSIC_ENABLE		(1<<7)
-#define HSIC_CTRL_PLL_BYPASS		(1<<4)
-
-#define TEST_GRP_0			0xc
-#define TEST_GRP_1			0x10
-
-#define HSIC_INT			0x14
-#define HSIC_INT_READY_INT_EN		(1<<10)
-#define HSIC_INT_CONNECT_INT_EN		(1<<9)
-#define HSIC_INT_CORE_INT_EN		(1<<8)
-#define HSIC_INT_HS_READY		(1<<2)
-#define HSIC_INT_CONNECT		(1<<1)
-#define HSIC_INT_CORE			(1<<0)
-
-#define HSIC_CONFIG			0x18
-#define USBHSIC_CTRL			0x20
-
-#define HSIC_USB_CTRL			0x28
-#define HSIC_USB_CTRL_CLKEN		1
-#define	HSIC_USB_CLK_PHY		0x0
-#define HSIC_USB_CLK_PMU		0x1
-
-#endif /* __ASM_ARCH_PXA_U2O_H */
-- 
1.7.4.1