From: xiechao.mail@gmail.com (Chao Xie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 18/29] arm: mmp: remove usb devices from pxa168
Date: Wed, 21 Nov 2012 21:04:59 -0500 [thread overview]
Message-ID: <1353549910-988-18-git-send-email-xiechao.mail@gmail.com> (raw)
In-Reply-To: <1353549910-988-1-git-send-email-xiechao.mail@gmail.com>
From: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
---
arch/arm/mach-mmp/pxa168.c | 42 ------------------------------------------
1 files changed, 0 insertions(+), 42 deletions(-)
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index b7f074f..dd3a68b 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -28,7 +28,6 @@
#include <mach/mfp.h>
#include <linux/dma-mapping.h>
#include <mach/pxa168.h>
-#include <mach/regs-usb.h>
#include "common.h"
#include "clock.h"
@@ -135,47 +134,6 @@ struct platform_device pxa168_device_gpio = {
.resource = pxa168_resource_gpio,
};
-struct resource pxa168_usb_host_resources[] = {
- /* USB Host conroller register base */
- [0] = {
- .start = PXA168_U2H_REGBASE + U2x_CAPREGS_OFFSET,
- .end = PXA168_U2H_REGBASE + USB_REG_RANGE,
- .flags = IORESOURCE_MEM,
- .name = "capregs",
- },
- /* USB PHY register base */
- [1] = {
- .start = PXA168_U2H_PHYBASE,
- .end = PXA168_U2H_PHYBASE + USB_PHY_RANGE,
- .flags = IORESOURCE_MEM,
- .name = "phyregs",
- },
- [2] = {
- .start = IRQ_PXA168_USB2,
- .end = IRQ_PXA168_USB2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
-struct platform_device pxa168_device_usb_host = {
- .name = "pxa-sph",
- .id = -1,
- .dev = {
- .dma_mask = &pxa168_usb_host_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-
- .num_resources = ARRAY_SIZE(pxa168_usb_host_resources),
- .resource = pxa168_usb_host_resources,
-};
-
-int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata)
-{
- pxa168_device_usb_host.dev.platform_data = pdata;
- return platform_device_register(&pxa168_device_usb_host);
-}
-
void pxa168_restart(char mode, const char *cmd)
{
soft_restart(0xffff0000);
--
1.7.4.1
next prev parent reply other threads:[~2012-11-22 2:04 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-22 2:04 [PATCH 01/29] usb: gadget: mv_udc: use udc_start and udc_stop functions Chao Xie
2012-11-22 2:04 ` [PATCH 02/29] usb: gadget: mv_udc: use devm_xxx for probe Chao Xie
2012-11-22 2:04 ` [PATCH 03/29] usb: gadget: mv_udc: fix the clk APIs Chao Xie
2012-11-22 2:04 ` [PATCH 04/29] usb: otg: mv_otg: use devm_xxx for probe Chao Xie
2012-11-22 2:04 ` [PATCH 05/29] usb: otg: mv_otg: fix the clk APIs Chao Xie
2012-11-22 2:04 ` [PATCH 06/29] usb: host: ehci-mv: fix " Chao Xie
2012-11-23 16:06 ` Alan Stern
2012-11-22 2:04 ` [PATCH 07/29] usb: host: ehci-mv: remove unused variable Chao Xie
2012-11-22 2:04 ` [PATCH 08/29] usb: gadget: mv_udc: fix the value of tranceiver Chao Xie
2012-11-22 2:04 ` [PATCH 09/29] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller Chao Xie
2012-11-22 2:04 ` [PATCH 10/29] usb: gadget: mv_udc: use PHY driver for udc Chao Xie
2012-11-22 2:04 ` [PATCH 11/29] usb: ehci: ehci-mv: use PHY driver for ehci Chao Xie
2012-11-22 2:04 ` [PATCH 12/29] usb: otg: mv_otg: use PHY driver for otg Chao Xie
2012-11-22 2:04 ` [PATCH 13/29] arm: mmp2: change the defintion of usb devices Chao Xie
2012-11-22 2:04 ` [PATCH 14/29] arm: pxa910: " Chao Xie
2012-11-22 2:04 ` [PATCH 15/29] arm: brownstone: add usb support for the board Chao Xie
2012-11-22 2:04 ` [PATCH 16/29] arm: ttc_dkb: add usb support Chao Xie
2012-11-22 2:04 ` [PATCH 17/29] arm: mmp: remove the usb phy setting Chao Xie
2012-11-22 2:04 ` Chao Xie [this message]
2012-11-22 2:05 ` [PATCH 19/29] usb: phy: mv_usb2_phy: add externel chip support Chao Xie
2012-11-22 2:05 ` [PATCH 20/29] usb: gadget: mv_udc: add extern " Chao Xie
2012-11-22 2:05 ` [PATCH 21/29] usb: ehci: ehci-mv: " Chao Xie
2012-11-22 2:05 ` [PATCH 22/29] usb: otg: mv_otg: " Chao Xie
2012-11-22 2:05 ` [PATCH 23/29] arm: mmp: add extern chip support for brownstone Chao Xie
2012-11-22 2:05 ` [PATCH 24/29] arm: mmp: add extern chip support for ttc_dkb Chao Xie
2012-11-22 2:05 ` [PATCH 25/29] usb: gadget: mv_udc: add device tree support Chao Xie
2012-11-22 2:05 ` [PATCH 26/29] usb: otg: mv_otg: " Chao Xie
2012-11-22 2:05 ` [PATCH 27/29] usb: ehci: ehci-mv: " Chao Xie
2012-11-22 2:05 ` [PATCH 28/29] arm: mmp: devicetree: add usb support for mmp2 Chao Xie
2012-11-22 2:05 ` [PATCH 29/29] arm: mmp: devicetree: add usb support for pxa910_dkb Chao Xie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353549910-988-18-git-send-email-xiechao.mail@gmail.com \
--to=xiechao.mail@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).