From: xiechao.mail@gmail.com (Chao Xie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 27/29] usb: ehci: ehci-mv: add device tree support
Date: Wed, 21 Nov 2012 21:05:08 -0500 [thread overview]
Message-ID: <1353549910-988-27-git-send-email-xiechao.mail@gmail.com> (raw)
In-Reply-To: <1353549910-988-1-git-send-email-xiechao.mail@gmail.com>
From: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
---
drivers/usb/host/ehci-mv.c | 104 +++++++++++++++++++++++++++++++++-----------
1 files changed, 79 insertions(+), 25 deletions(-)
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 171e145..0e99dac 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/of.h>
#include <linux/err.h>
#include <linux/usb/otg.h>
#include <linux/usb/mv_usb2.h>
@@ -32,11 +33,9 @@ struct ehci_hcd_mv {
struct usb_phy *otg;
- struct mv_usb_platform_data *pdata;
-
/* clock source and total clock number */
unsigned int clknum;
- struct clk *clk[0];
+ struct clk **clk;
};
static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
@@ -138,22 +137,55 @@ static const struct hc_driver mv_ehci_hc_driver = {
.bus_resume = ehci_bus_resume,
};
+static int __devinit mv_ehci_parse_dt(struct platform_device *pdev,
+ struct ehci_hcd_mv *ehci_mv)
+{
+ struct device_node *np = pdev->dev.of_node;
+ unsigned int clks_num;
+ int i, ret;
+ const char *clk_name;
+
+ if (!np)
+ return 1;
+
+ clks_num = of_property_count_strings(np, "clocks");
+ if (clks_num < 0)
+ return clks_num;
+
+ ehci_mv->clk = devm_kzalloc(&pdev->dev,
+ sizeof(struct clk *) * clks_num, GFP_KERNEL);
+ if (ehci_mv->clk == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < clks_num; i++) {
+ ret = of_property_read_string_index(np, "clocks", i,
+ &clk_name);
+ if (ret)
+ return ret;
+ ehci_mv->clk[i] = clk_get(NULL, clk_name);
+ if (IS_ERR(ehci_mv->clk[i]))
+ return PTR_ERR(ehci_mv->clk[i]);
+ }
+
+ ehci_mv->clknum = clks_num;
+
+ ret = of_property_read_u32(np, "mode", &ehci_mv->mode);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static int mv_ehci_probe(struct platform_device *pdev)
{
- struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
struct ehci_hcd_mv *ehci_mv;
struct resource *r;
- int clk_i, retval = -ENODEV;
+ int retval = -ENODEV;
u32 offset;
size_t size;
- if (!pdata) {
- dev_err(&pdev->dev, "missing platform_data\n");
- return -ENODEV;
- }
-
if (usb_disabled())
return -ENODEV;
@@ -161,7 +193,7 @@ static int mv_ehci_probe(struct platform_device *pdev)
if (!hcd)
return -ENOMEM;
- size = sizeof(*ehci_mv) + sizeof(struct clk *) * pdata->clknum;
+ size = sizeof(*ehci_mv);
ehci_mv = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (ehci_mv == NULL) {
dev_err(&pdev->dev, "cannot allocate ehci_hcd_mv\n");
@@ -170,19 +202,36 @@ static int mv_ehci_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, ehci_mv);
- ehci_mv->pdata = pdata;
ehci_mv->hcd = hcd;
- ehci_mv->clknum = pdata->clknum;
- for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++) {
- ehci_mv->clk[clk_i] =
- devm_clk_get(&pdev->dev, pdata->clkname[clk_i]);
- if (IS_ERR(ehci_mv->clk[clk_i])) {
- dev_err(&pdev->dev, "error get clck \"%s\"\n",
- pdata->clkname[clk_i]);
- retval = PTR_ERR(ehci_mv->clk[clk_i]);
- goto err_clear_drvdata;
+ retval = mv_ehci_parse_dt(pdev, ehci_mv);
+ if (retval > 0) {
+ struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
+ int clk_i = 0;
+
+ /* no CONFIG_OF */
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "missing platform_data\n");
+ return -ENODEV;
+ }
+ ehci_mv->mode = pdata->mode;
+ ehci_mv->clknum = pdata->clknum;
+
+ size = sizeof(struct clk *) * ehci_mv->clknum;
+ ehci_mv->clk = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ if (ehci_mv->clk == NULL)
+ return -ENOMEM;
+ for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++) {
+ ehci_mv->clk[clk_i] = devm_clk_get(&pdev->dev,
+ pdata->clkname[clk_i]);
+ if (IS_ERR(ehci_mv->clk[clk_i])) {
+ retval = PTR_ERR(ehci_mv->clk[clk_i]);
+ return retval;
+ }
}
+ } else if (retval < 0) {
+ dev_err(&pdev->dev, "error parse dt\n");
+ return retval;
}
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -230,7 +279,6 @@ static int mv_ehci_probe(struct platform_device *pdev)
ehci = hcd_to_ehci(hcd);
ehci->caps = (struct ehci_caps *) ehci_mv->cap_regs;
- ehci_mv->mode = pdata->mode;
if (ehci_mv->mode == MV_USB_MODE_OTG) {
#ifdef CONFIG_USB_OTG_UTILS
ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
@@ -334,13 +382,19 @@ static void mv_ehci_shutdown(struct platform_device *pdev)
hcd->driver->shutdown(hcd);
}
+static struct of_device_id mv_ehci_dt_ids[] = {
+ { .compatible = "mrvl,mv-ehci" },
+};
+MODULE_DEVICE_TABLE(of, mv_ehci_dt_ids);
+
static struct platform_driver ehci_mv_driver = {
.probe = mv_ehci_probe,
.remove = mv_ehci_remove,
.shutdown = mv_ehci_shutdown,
.driver = {
- .name = "mv-ehci",
- .bus = &platform_bus_type,
- },
+ .name = "mv-ehci",
+ .bus = &platform_bus_type,
+ .of_match_table = mv_ehci_dt_ids,
+ },
.id_table = ehci_id_table,
};
--
1.7.4.1
next prev parent reply other threads:[~2012-11-22 2:05 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-22 2:04 [PATCH 01/29] usb: gadget: mv_udc: use udc_start and udc_stop functions Chao Xie
2012-11-22 2:04 ` [PATCH 02/29] usb: gadget: mv_udc: use devm_xxx for probe Chao Xie
2012-11-22 2:04 ` [PATCH 03/29] usb: gadget: mv_udc: fix the clk APIs Chao Xie
2012-11-22 2:04 ` [PATCH 04/29] usb: otg: mv_otg: use devm_xxx for probe Chao Xie
2012-11-22 2:04 ` [PATCH 05/29] usb: otg: mv_otg: fix the clk APIs Chao Xie
2012-11-22 2:04 ` [PATCH 06/29] usb: host: ehci-mv: fix " Chao Xie
2012-11-23 16:06 ` Alan Stern
2012-11-22 2:04 ` [PATCH 07/29] usb: host: ehci-mv: remove unused variable Chao Xie
2012-11-22 2:04 ` [PATCH 08/29] usb: gadget: mv_udc: fix the value of tranceiver Chao Xie
2012-11-22 2:04 ` [PATCH 09/29] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller Chao Xie
2012-11-22 2:04 ` [PATCH 10/29] usb: gadget: mv_udc: use PHY driver for udc Chao Xie
2012-11-22 2:04 ` [PATCH 11/29] usb: ehci: ehci-mv: use PHY driver for ehci Chao Xie
2012-11-22 2:04 ` [PATCH 12/29] usb: otg: mv_otg: use PHY driver for otg Chao Xie
2012-11-22 2:04 ` [PATCH 13/29] arm: mmp2: change the defintion of usb devices Chao Xie
2012-11-22 2:04 ` [PATCH 14/29] arm: pxa910: " Chao Xie
2012-11-22 2:04 ` [PATCH 15/29] arm: brownstone: add usb support for the board Chao Xie
2012-11-22 2:04 ` [PATCH 16/29] arm: ttc_dkb: add usb support Chao Xie
2012-11-22 2:04 ` [PATCH 17/29] arm: mmp: remove the usb phy setting Chao Xie
2012-11-22 2:04 ` [PATCH 18/29] arm: mmp: remove usb devices from pxa168 Chao Xie
2012-11-22 2:05 ` [PATCH 19/29] usb: phy: mv_usb2_phy: add externel chip support Chao Xie
2012-11-22 2:05 ` [PATCH 20/29] usb: gadget: mv_udc: add extern " Chao Xie
2012-11-22 2:05 ` [PATCH 21/29] usb: ehci: ehci-mv: " Chao Xie
2012-11-22 2:05 ` [PATCH 22/29] usb: otg: mv_otg: " Chao Xie
2012-11-22 2:05 ` [PATCH 23/29] arm: mmp: add extern chip support for brownstone Chao Xie
2012-11-22 2:05 ` [PATCH 24/29] arm: mmp: add extern chip support for ttc_dkb Chao Xie
2012-11-22 2:05 ` [PATCH 25/29] usb: gadget: mv_udc: add device tree support Chao Xie
2012-11-22 2:05 ` [PATCH 26/29] usb: otg: mv_otg: " Chao Xie
2012-11-22 2:05 ` Chao Xie [this message]
2012-11-22 2:05 ` [PATCH 28/29] arm: mmp: devicetree: add usb support for mmp2 Chao Xie
2012-11-22 2:05 ` [PATCH 29/29] arm: mmp: devicetree: add usb support for pxa910_dkb Chao Xie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353549910-988-27-git-send-email-xiechao.mail@gmail.com \
--to=xiechao.mail@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).