linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: xiechao.mail@gmail.com (Chao Xie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 29/29] arm: mmp: devicetree: add usb support for pxa910_dkb
Date: Wed, 21 Nov 2012 21:05:10 -0500	[thread overview]
Message-ID: <1353549910-988-29-git-send-email-xiechao.mail@gmail.com> (raw)
In-Reply-To: <1353549910-988-1-git-send-email-xiechao.mail@gmail.com>

From: Chao Xie <chao.xie@marvell.com>

Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
 arch/arm/boot/dts/pxa910.dtsi |   30 ++++++++++++++++++++++++++++++
 arch/arm/mach-mmp/mmp-dt.c    |    5 +++++
 2 files changed, 35 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
index 825aaca..ea6c71a 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -44,6 +44,36 @@
 				reg = <0xd4282000 0x1000>;
 				mrvl,intc-nr-irqs = <64>;
 			};
+			usbphy: usbphy at d4207000 {
+				compatible = "mrvl,pxa910-usb-phy";
+				clocks = "usb_clk";
+				reg = <0xd4207000 0x1ff>;
+			};
+			udc: udc at d4208100 {
+				compatible = "mrvl,mv-udc";
+				clocks = "usb_clk";
+				extern_attr = <0>;
+				mode = <0>;
+				reg = <0xd4208100 0x1ff>;
+				interrupts = <44>;
+			};
+			otg: otg at d4208100 {
+				compatible = "mrvl,mv-otg";
+				clocks = "usb_clk";
+				extern_attr = <0>;
+				mode = <0>;
+				force_a_bus_req = <1>;
+				disable_clock_gating = <1>;
+				reg = <0xd4208100 0x1ff>;
+				interrupts = <44>;
+			};
+			ehci: ehci at d4208100 {
+				compatible = "mrvl,mv-ehci";
+				clocks = "usb_clk";
+				mode = <0>;
+				reg = <0xd4208100 0x1ff>;
+				interrupts = <44>;
+			};
 
 		};
 
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
index 033cc31..5044552 100644
--- a/arch/arm/mach-mmp/mmp-dt.c
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -45,6 +45,11 @@ static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
+	OF_DEV_AUXDATA("mrvl,pxa910-usb-phy", 0xd4207000, "pxa910-usb-phy", NULL),
+	OF_DEV_AUXDATA("mrvl,mv-udc", 0xd4208100, "mv-udc", NULL),
+	OF_DEV_AUXDATA("mrvl,mv-otg", 0xd4208100, "mv-otg", NULL),
+	OF_DEV_AUXDATA("mrvl,mv-udc", 0xd4208100, "mv-ehci", NULL),
+
 	{}
 };
 
-- 
1.7.4.1

      parent reply	other threads:[~2012-11-22  2:05 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-22  2:04 [PATCH 01/29] usb: gadget: mv_udc: use udc_start and udc_stop functions Chao Xie
2012-11-22  2:04 ` [PATCH 02/29] usb: gadget: mv_udc: use devm_xxx for probe Chao Xie
2012-11-22  2:04 ` [PATCH 03/29] usb: gadget: mv_udc: fix the clk APIs Chao Xie
2012-11-22  2:04 ` [PATCH 04/29] usb: otg: mv_otg: use devm_xxx for probe Chao Xie
2012-11-22  2:04 ` [PATCH 05/29] usb: otg: mv_otg: fix the clk APIs Chao Xie
2012-11-22  2:04 ` [PATCH 06/29] usb: host: ehci-mv: fix " Chao Xie
2012-11-23 16:06   ` Alan Stern
2012-11-22  2:04 ` [PATCH 07/29] usb: host: ehci-mv: remove unused variable Chao Xie
2012-11-22  2:04 ` [PATCH 08/29] usb: gadget: mv_udc: fix the value of tranceiver Chao Xie
2012-11-22  2:04 ` [PATCH 09/29] usb: phy: mv_usb2: add PHY driver for marvell usb2 controller Chao Xie
2012-11-22  2:04 ` [PATCH 10/29] usb: gadget: mv_udc: use PHY driver for udc Chao Xie
2012-11-22  2:04 ` [PATCH 11/29] usb: ehci: ehci-mv: use PHY driver for ehci Chao Xie
2012-11-22  2:04 ` [PATCH 12/29] usb: otg: mv_otg: use PHY driver for otg Chao Xie
2012-11-22  2:04 ` [PATCH 13/29] arm: mmp2: change the defintion of usb devices Chao Xie
2012-11-22  2:04 ` [PATCH 14/29] arm: pxa910: " Chao Xie
2012-11-22  2:04 ` [PATCH 15/29] arm: brownstone: add usb support for the board Chao Xie
2012-11-22  2:04 ` [PATCH 16/29] arm: ttc_dkb: add usb support Chao Xie
2012-11-22  2:04 ` [PATCH 17/29] arm: mmp: remove the usb phy setting Chao Xie
2012-11-22  2:04 ` [PATCH 18/29] arm: mmp: remove usb devices from pxa168 Chao Xie
2012-11-22  2:05 ` [PATCH 19/29] usb: phy: mv_usb2_phy: add externel chip support Chao Xie
2012-11-22  2:05 ` [PATCH 20/29] usb: gadget: mv_udc: add extern " Chao Xie
2012-11-22  2:05 ` [PATCH 21/29] usb: ehci: ehci-mv: " Chao Xie
2012-11-22  2:05 ` [PATCH 22/29] usb: otg: mv_otg: " Chao Xie
2012-11-22  2:05 ` [PATCH 23/29] arm: mmp: add extern chip support for brownstone Chao Xie
2012-11-22  2:05 ` [PATCH 24/29] arm: mmp: add extern chip support for ttc_dkb Chao Xie
2012-11-22  2:05 ` [PATCH 25/29] usb: gadget: mv_udc: add device tree support Chao Xie
2012-11-22  2:05 ` [PATCH 26/29] usb: otg: mv_otg: " Chao Xie
2012-11-22  2:05 ` [PATCH 27/29] usb: ehci: ehci-mv: " Chao Xie
2012-11-22  2:05 ` [PATCH 28/29] arm: mmp: devicetree: add usb support for mmp2 Chao Xie
2012-11-22  2:05 ` Chao Xie [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1353549910-988-29-git-send-email-xiechao.mail@gmail.com \
    --to=xiechao.mail@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).