From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/1] gpio: Provide the STMPE GPIO driver with its own IRQ Domain
Date: Fri, 23 Nov 2012 12:44:25 +0000 [thread overview]
Message-ID: <1353674665-31905-1-git-send-email-lee.jones@linaro.org> (raw)
The STMPE GPIO driver can be used as an IRQ controller by some
related devices. Here we provide it with its very own IRQ Domain
so that IRQs can be issued dynamically. This will stand the
driver in good stead when it is enabled for Device Tree, as this
it a prerequisite.
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/gpio/gpio-stmpe.c | 67 +++++++++++++++++++++++++++------------------
1 file changed, 41 insertions(+), 26 deletions(-)
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index dce3472..0e0471b 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -11,6 +11,7 @@
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/interrupt.h>
#include <linux/mfd/stmpe.h>
@@ -28,6 +29,7 @@ struct stmpe_gpio {
struct stmpe *stmpe;
struct device *dev;
struct mutex irq_lock;
+ struct irq_domain *domain;
int irq_base;
unsigned norequest_mask;
@@ -267,38 +269,55 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev)
return IRQ_HANDLED;
}
-static int __devinit stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio)
+int stmpe_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hwirq)
{
- int base = stmpe_gpio->irq_base;
- int irq;
+ struct stmpe_gpio *stmpe_gpio = d->host_data;
+
+ if (!stmpe_gpio)
+ return -EINVAL;
- for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) {
- irq_set_chip_data(irq, stmpe_gpio);
- irq_set_chip_and_handler(irq, &stmpe_gpio_irq_chip,
- handle_simple_irq);
- irq_set_nested_thread(irq, 1);
+ irq_set_chip_data(hwirq, stmpe_gpio);
+ irq_set_chip_and_handler(hwirq, &stmpe_gpio_irq_chip,
+ handle_simple_irq);
+ irq_set_nested_thread(hwirq, 1);
#ifdef CONFIG_ARM
- set_irq_flags(irq, IRQF_VALID);
+ set_irq_flags(hwirq, IRQF_VALID);
#else
- irq_set_noprobe(irq);
+ irq_set_noprobe(hwirq);
#endif
- }
return 0;
}
-static void stmpe_gpio_irq_remove(struct stmpe_gpio *stmpe_gpio)
+void stmpe_gpio_irq_unmap(struct irq_domain *d, unsigned int virq)
{
- int base = stmpe_gpio->irq_base;
- int irq;
-
- for (irq = base; irq < base + stmpe_gpio->chip.ngpio; irq++) {
#ifdef CONFIG_ARM
- set_irq_flags(irq, 0);
+ set_irq_flags(virq, 0);
#endif
- irq_set_chip_and_handler(irq, NULL, NULL);
- irq_set_chip_data(irq, NULL);
+ irq_set_chip_and_handler(virq, NULL, NULL);
+ irq_set_chip_data(virq, NULL);
+}
+
+const struct irq_domain_ops stmpe_gpio_irq_simple_ops = {
+ .unmap = stmpe_gpio_irq_unmap,
+ .map = stmpe_gpio_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static int __devinit stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio)
+{
+ int base = stmpe_gpio->irq_base;
+
+ stmpe_gpio->domain = irq_domain_add_simple(NULL,
+ stmpe_gpio->chip.ngpio, base,
+ &stmpe_gpio_irq_simple_ops, stmpe_gpio);
+ if (!stmpe_gpio->domain) {
+ dev_err(stmpe_gpio->dev, "failed to create irqdomain\n");
+ return -ENOSYS;
}
+
+ return 0;
}
static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
@@ -348,7 +367,7 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
IRQF_ONESHOT, "stmpe-gpio", stmpe_gpio);
if (ret) {
dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
- goto out_removeirq;
+ goto out_disable;
}
}
@@ -368,9 +387,6 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
out_freeirq:
if (irq >= 0)
free_irq(irq, stmpe_gpio);
-out_removeirq:
- if (irq >= 0)
- stmpe_gpio_irq_remove(stmpe_gpio);
out_disable:
stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
out_free:
@@ -398,10 +414,9 @@ static int __devexit stmpe_gpio_remove(struct platform_device *pdev)
stmpe_disable(stmpe, STMPE_BLOCK_GPIO);
- if (irq >= 0) {
+ if (irq >= 0)
free_irq(irq, stmpe_gpio);
- stmpe_gpio_irq_remove(stmpe_gpio);
- }
+
platform_set_drvdata(pdev, NULL);
kfree(stmpe_gpio);
--
1.7.9.5
next reply other threads:[~2012-11-23 12:44 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-23 12:44 Lee Jones [this message]
2012-11-23 12:58 ` [PATCH 1/1] gpio: Provide the STMPE GPIO driver with its own IRQ Domain Viresh Kumar
-- strict thread matches above, loose matches on Subject: below --
2012-11-23 15:19 Lee Jones
2012-11-30 14:01 ` Lee Jones
2012-12-01 16:25 ` Linus Walleij
2012-12-04 9:14 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353674665-31905-1-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).