* [PATCH v2 1/5] ARM: Exynos: add a register base address variable in mct controller driver
2012-11-24 20:44 [PATCH v2 0/5] ARM: Exynos: Enable device tree support for MCT controller Thomas Abraham
@ 2012-11-24 20:44 ` Thomas Abraham
2012-11-24 20:44 ` [PATCH v2 2/5] ARM: Exynos: prepare an array of MCT interrupt numbers and use it Thomas Abraham
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Thomas Abraham @ 2012-11-24 20:44 UTC (permalink / raw)
To: linux-arm-kernel
All the MCT register read/writes use a fixed remapped address S5P_VA_SYSTIMER.
With device tree support for MCT controller, it is possible to remove the
static remap of the MCT controller address space and do the remap during the
initialization of the MCT controller with the physical address obtained from
the device tree.
So in preparation of adding device tree support for MCT controller, add a new
register base address variable that will hold the remapped MCT controller base
address and convert all MCT register read/writes to use this new variable as
the base address instead of the fixed S5P_VA_SYSTIMER.
While at it, the MCT register offset and bit mask definitions are moved into
the MCT controller driver file since there are no other consumers of these
definitions.
Cc: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
---
arch/arm/mach-exynos/include/mach/regs-mct.h | 53 --------------
arch/arm/mach-exynos/mct.c | 97 ++++++++++++++++---------
2 files changed, 62 insertions(+), 88 deletions(-)
delete mode 100644 arch/arm/mach-exynos/include/mach/regs-mct.h
diff --git a/arch/arm/mach-exynos/include/mach/regs-mct.h b/arch/arm/mach-exynos/include/mach/regs-mct.h
deleted file mode 100644
index 80dd02a..0000000
--- a/arch/arm/mach-exynos/include/mach/regs-mct.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* arch/arm/mach-exynos4/include/mach/regs-mct.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 MCT configutation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_MCT_H
-#define __ASM_ARCH_REGS_MCT_H __FILE__
-
-#include <mach/map.h>
-
-#define EXYNOS4_MCTREG(x) (S5P_VA_SYSTIMER + (x))
-
-#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
-#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
-#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
-
-#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
-#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
-#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
-
-#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
-
-#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
-#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
-#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
-
-#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
-#define EXYNOS4_MCT_L_MASK (0xffffff00)
-
-#define MCT_L_TCNTB_OFFSET (0x00)
-#define MCT_L_ICNTB_OFFSET (0x08)
-#define MCT_L_TCON_OFFSET (0x20)
-#define MCT_L_INT_CSTAT_OFFSET (0x30)
-#define MCT_L_INT_ENB_OFFSET (0x34)
-#define MCT_L_WSTAT_OFFSET (0x40)
-
-#define MCT_G_TCON_START (1 << 8)
-#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
-#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
-
-#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
-#define MCT_L_TCON_INT_START (1 << 1)
-#define MCT_L_TCON_TIMER_START (1 << 0)
-
-#endif /* __ASM_ARCH_REGS_MCT_H */
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 57668eb..a9fd001 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -29,9 +29,36 @@
#include <mach/map.h>
#include <mach/irqs.h>
-#include <mach/regs-mct.h>
#include <asm/mach/time.h>
+#define EXYNOS4_MCTREG(x) (x)
+#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
+#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
+#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
+#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
+#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
+#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
+#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
+#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
+#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
+#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
+#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
+#define EXYNOS4_MCT_L_MASK (0xffffff00)
+
+#define MCT_L_TCNTB_OFFSET (0x00)
+#define MCT_L_ICNTB_OFFSET (0x08)
+#define MCT_L_TCON_OFFSET (0x20)
+#define MCT_L_INT_CSTAT_OFFSET (0x30)
+#define MCT_L_INT_ENB_OFFSET (0x34)
+#define MCT_L_WSTAT_OFFSET (0x40)
+#define MCT_G_TCON_START (1 << 8)
+#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
+#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
+#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
+#define MCT_L_TCON_INT_START (1 << 1)
+#define MCT_L_TCON_TIMER_START (1 << 0)
+
#define TICK_BASE_CNT 1
enum {
@@ -39,64 +66,62 @@ enum {
MCT_INT_PPI
};
+static void __iomem *reg_base;
static unsigned long clk_rate;
static unsigned int mct_int_type;
struct mct_clock_event_device {
struct clock_event_device *evt;
- void __iomem *base;
+ unsigned long base;
char name[10];
};
-static void exynos4_mct_write(unsigned int value, void *addr)
+static void exynos4_mct_write(unsigned int value, unsigned long offset)
{
- void __iomem *stat_addr;
+ unsigned long stat_addr;
u32 mask;
u32 i;
- __raw_writel(value, addr);
+ __raw_writel(value, reg_base + offset);
- if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
- u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
- switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
- case (u32) MCT_L_TCON_OFFSET:
- stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) {
+ stat_addr = (offset & ~EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
+ switch (offset & EXYNOS4_MCT_L_MASK) {
+ case MCT_L_TCON_OFFSET:
mask = 1 << 3; /* L_TCON write status */
break;
- case (u32) MCT_L_ICNTB_OFFSET:
- stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ case MCT_L_ICNTB_OFFSET:
mask = 1 << 1; /* L_ICNTB write status */
break;
- case (u32) MCT_L_TCNTB_OFFSET:
- stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ case MCT_L_TCNTB_OFFSET:
mask = 1 << 0; /* L_TCNTB write status */
break;
default:
return;
}
} else {
- switch ((u32) addr) {
- case (u32) EXYNOS4_MCT_G_TCON:
+ switch (offset) {
+ case EXYNOS4_MCT_G_TCON:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 16; /* G_TCON write status */
break;
- case (u32) EXYNOS4_MCT_G_COMP0_L:
+ case EXYNOS4_MCT_G_COMP0_L:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 0; /* G_COMP0_L write status */
break;
- case (u32) EXYNOS4_MCT_G_COMP0_U:
+ case EXYNOS4_MCT_G_COMP0_U:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 1; /* G_COMP0_U write status */
break;
- case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
+ case EXYNOS4_MCT_G_COMP0_ADD_INCR:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 2; /* G_COMP0_ADD_INCR w status */
break;
- case (u32) EXYNOS4_MCT_G_CNT_L:
+ case EXYNOS4_MCT_G_CNT_L:
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
mask = 1 << 0; /* G_CNT_L write status */
break;
- case (u32) EXYNOS4_MCT_G_CNT_U:
+ case EXYNOS4_MCT_G_CNT_U:
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
mask = 1 << 1; /* G_CNT_U write status */
break;
@@ -107,12 +132,12 @@ static void exynos4_mct_write(unsigned int value, void *addr)
/* Wait maximum 1 ms until written values are applied */
for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
- if (__raw_readl(stat_addr) & mask) {
- __raw_writel(mask, stat_addr);
+ if (__raw_readl(reg_base + stat_addr) & mask) {
+ __raw_writel(mask, reg_base + stat_addr);
return;
}
- panic("MCT hangs after writing %d (addr:0x%08x)\n", value, (u32)addr);
+ panic("MCT hangs after writing %d (offset:0x%lx)\n", value, offset);
}
/* Clocksource handling */
@@ -123,7 +148,7 @@ static void exynos4_mct_frc_start(u32 hi, u32 lo)
exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L);
exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U);
- reg = __raw_readl(EXYNOS4_MCT_G_TCON);
+ reg = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
reg |= MCT_G_TCON_START;
exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
}
@@ -131,12 +156,12 @@ static void exynos4_mct_frc_start(u32 hi, u32 lo)
static cycle_t exynos4_frc_read(struct clocksource *cs)
{
unsigned int lo, hi;
- u32 hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
+ u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
do {
hi = hi2;
- lo = __raw_readl(EXYNOS4_MCT_G_CNT_L);
- hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
+ lo = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_L);
+ hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
} while (hi != hi2);
return ((cycle_t)hi << 32) | lo;
@@ -168,7 +193,7 @@ static void exynos4_mct_comp0_stop(void)
{
unsigned int tcon;
- tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
+ tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
@@ -181,7 +206,7 @@ static void exynos4_mct_comp0_start(enum clock_event_mode mode,
unsigned int tcon;
cycle_t comp_cycle;
- tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
+ tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
if (mode == CLOCK_EVT_MODE_PERIODIC) {
tcon |= MCT_G_TCON_COMP0_AUTO_INC;
@@ -278,12 +303,12 @@ static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
{
unsigned long tmp;
unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
- void __iomem *addr = mevt->base + MCT_L_TCON_OFFSET;
+ unsigned long offset = mevt->base + MCT_L_TCON_OFFSET;
- tmp = __raw_readl(addr);
+ tmp = __raw_readl(reg_base + offset);
if (tmp & mask) {
tmp &= ~mask;
- exynos4_mct_write(tmp, addr);
+ exynos4_mct_write(tmp, offset);
}
}
@@ -302,7 +327,7 @@ static void exynos4_mct_tick_start(unsigned long cycles,
/* enable MCT tick interrupt */
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
- tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET);
+ tmp = __raw_readl(reg_base + mevt->base + MCT_L_TCON_OFFSET);
tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
MCT_L_TCON_INTERVAL_MODE;
exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
@@ -354,7 +379,7 @@ static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
exynos4_mct_tick_stop(mevt);
/* Clear the MCT tick interrupt */
- if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+ if (__raw_readl(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
return 1;
} else {
@@ -463,6 +488,8 @@ static void __init exynos4_timer_resources(void)
clk_rate = clk_get_rate(mct_clk);
+ reg_base = S5P_VA_SYSTIMER;
+
#ifdef CONFIG_LOCAL_TIMERS
if (mct_int_type == MCT_INT_PPI) {
int err;
--
1.7.4.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 2/5] ARM: Exynos: prepare an array of MCT interrupt numbers and use it
2012-11-24 20:44 [PATCH v2 0/5] ARM: Exynos: Enable device tree support for MCT controller Thomas Abraham
2012-11-24 20:44 ` [PATCH v2 1/5] ARM: Exynos: add a register base address variable in mct controller driver Thomas Abraham
@ 2012-11-24 20:44 ` Thomas Abraham
2012-11-24 20:44 ` [PATCH v2 3/5] ARM: Exynos: add device tree support for MCT controller driver Thomas Abraham
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Thomas Abraham @ 2012-11-24 20:44 UTC (permalink / raw)
To: linux-arm-kernel
Instead of using soc_is_xxx macro at more than one place in the MCT
controller driver to decide the MCT interrpt number to be setup, populate
a table of known MCT global and local timer interrupts and use the values
in table to setup the MCT interrupts.
This also helps in adding device tree support for MCT controller driver by
allowing the driver to retrieve interrupt numbers from device tree and
populating them into this table, thereby supporting both legacy and dt
functionality to co-exist.
Cc: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
---
arch/arm/mach-exynos/mct.c | 57 +++++++++++++++++++++++++++----------------
1 files changed, 36 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index a9fd001..2f4ea16 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -66,9 +66,22 @@ enum {
MCT_INT_PPI
};
+enum {
+ MCT_G0_IRQ,
+ MCT_G1_IRQ,
+ MCT_G2_IRQ,
+ MCT_G3_IRQ,
+ MCT_L0_IRQ,
+ MCT_L1_IRQ,
+ MCT_L2_IRQ,
+ MCT_L3_IRQ,
+ MCT_NR_IRQS,
+};
+
static void __iomem *reg_base;
static unsigned long clk_rate;
static unsigned int mct_int_type;
+static int mct_irqs[MCT_NR_IRQS];
struct mct_clock_event_device {
struct clock_event_device *evt;
@@ -287,11 +300,7 @@ static void exynos4_clockevent_init(void)
clockevent_delta2ns(0xf, &mct_comp_device);
mct_comp_device.cpumask = cpumask_of(0);
clockevents_register_device(&mct_comp_device);
-
- if (soc_is_exynos5250())
- setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq);
- else
- setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq);
+ setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq);
}
#ifdef CONFIG_LOCAL_TIMERS
@@ -415,7 +424,6 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
{
struct mct_clock_event_device *mevt;
unsigned int cpu = smp_processor_id();
- int mct_lx_irq;
mevt = this_cpu_ptr(&percpu_mct_tick);
mevt->evt = evt;
@@ -442,21 +450,17 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
if (mct_int_type == MCT_INT_SPI) {
if (cpu == 0) {
- mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 :
- EXYNOS5_IRQ_MCT_L0;
mct_tick0_event_irq.dev_id = mevt;
- evt->irq = mct_lx_irq;
- setup_irq(mct_lx_irq, &mct_tick0_event_irq);
+ evt->irq = mct_irqs[MCT_L0_IRQ];
+ setup_irq(evt->irq, &mct_tick0_event_irq);
} else {
- mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 :
- EXYNOS5_IRQ_MCT_L1;
mct_tick1_event_irq.dev_id = mevt;
- evt->irq = mct_lx_irq;
- setup_irq(mct_lx_irq, &mct_tick1_event_irq);
- irq_set_affinity(mct_lx_irq, cpumask_of(1));
+ evt->irq = mct_irqs[MCT_L1_IRQ];
+ setup_irq(evt->irq, &mct_tick1_event_irq);
+ irq_set_affinity(evt->irq, cpumask_of(1));
}
} else {
- enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
+ enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
}
return 0;
@@ -472,7 +476,7 @@ static void exynos4_local_timer_stop(struct clock_event_device *evt)
else
remove_irq(evt->irq, &mct_tick1_event_irq);
else
- disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER);
+ disable_percpu_irq(mct_irqs[MCT_L0_IRQ]);
}
static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = {
@@ -494,11 +498,11 @@ static void __init exynos4_timer_resources(void)
if (mct_int_type == MCT_INT_PPI) {
int err;
- err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER,
+ err = request_percpu_irq(mct_irqs[MCT_L0_IRQ],
exynos4_mct_tick_isr, "MCT",
&percpu_mct_tick);
WARN(err, "MCT: can't request IRQ %d (%d)\n",
- EXYNOS_IRQ_MCT_LOCALTIMER, err);
+ mct_irqs[MCT_L0_IRQ], err);
}
local_timer_register(&exynos4_mct_tick_ops);
@@ -512,10 +516,21 @@ static void __init exynos_timer_init(void)
return;
}
- if ((soc_is_exynos4210()) || (soc_is_exynos5250()))
+ if (soc_is_exynos4210()) {
+ mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0;
+ mct_irqs[MCT_L0_IRQ] = EXYNOS4_IRQ_MCT_L0;
+ mct_irqs[MCT_L1_IRQ] = EXYNOS4_IRQ_MCT_L1;
mct_int_type = MCT_INT_SPI;
- else
+ } else if (soc_is_exynos5250()) {
+ mct_irqs[MCT_G0_IRQ] = EXYNOS5_IRQ_MCT_G0;
+ mct_irqs[MCT_L0_IRQ] = EXYNOS5_IRQ_MCT_L0;
+ mct_irqs[MCT_L1_IRQ] = EXYNOS5_IRQ_MCT_L1;
+ mct_int_type = MCT_INT_SPI;
+ } else {
+ mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0;
+ mct_irqs[MCT_L0_IRQ] = EXYNOS_IRQ_MCT_LOCALTIMER;
mct_int_type = MCT_INT_PPI;
+ }
exynos4_timer_resources();
exynos4_clocksource_init();
--
1.7.4.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 3/5] ARM: Exynos: add device tree support for MCT controller driver
2012-11-24 20:44 [PATCH v2 0/5] ARM: Exynos: Enable device tree support for MCT controller Thomas Abraham
2012-11-24 20:44 ` [PATCH v2 1/5] ARM: Exynos: add a register base address variable in mct controller driver Thomas Abraham
2012-11-24 20:44 ` [PATCH v2 2/5] ARM: Exynos: prepare an array of MCT interrupt numbers and use it Thomas Abraham
@ 2012-11-24 20:44 ` Thomas Abraham
2012-11-24 20:44 ` [PATCH v2 4/5] ARM: Exynos: remove static io-remapping of mct registers for Exynos5 Thomas Abraham
2012-11-24 20:44 ` [PATCH v2 5/5] ARM: dts: add mct device tree node for all supported Exynos SoC's Thomas Abraham
4 siblings, 0 replies; 6+ messages in thread
From: Thomas Abraham @ 2012-11-24 20:44 UTC (permalink / raw)
To: linux-arm-kernel
Allow the MCT controller base address and interrupts to be obtained from
device tree and remove unused static definitions of these. The non-dt support
for Exynos5250 is removed but retained for Exynos4210 based platforms.
Cc: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
---
.../bindings/timer/samsung,exynos4210-mct.txt | 69 ++++++++++++++++++++
arch/arm/mach-exynos/include/mach/irqs.h | 6 --
arch/arm/mach-exynos/mct.c | 41 ++++++++----
3 files changed, 97 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
new file mode 100644
index 0000000..c1b0a3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
@@ -0,0 +1,69 @@
+Samsung's Multi Core Timer (MCT)
+
+The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
+global timer and CPU local timers. The global timer is a 64-bit free running
+up-counter and can generate 4 interrupts when the counter reaches one of the
+four preset counter values. The CPU local timers are 32-bit free running
+down-counters and generate an interrupt when the counter expires. There is
+one CPU local timer instantiated in MCT for every CPU in the system.
+
+Required properties:
+
+- compatible: should be "samsung,exynos4210-mct".
+- reg: base address of the mct controller and length of the address space
+ it occupies.
+- interrupts: the list of interrupts generated by the controller. The following
+ should be the order of the interrupts specified. The local timer interrupts
+ should be specified after the four global timer interrupts have been
+ specified.
+
+ 0: Global Timer Interrupt 0
+ 1: Global Timer Interrupt 1
+ 2: Global Timer Interrupt 2
+ 3: Global Timer Interrupt 3
+ 4: Local Timer Interrupt 0
+ 5: Local Timer Interrupt 1
+ 6: ..
+ 7: ..
+ i: Local Timer Interrupt n
+
+- samsung,mct-nr-local-irqs: The number of local timer interrupts supported
+ by the MCT controller.
+
+Example 1: In this example, the system uses only the first global timer
+ interrupt generated by MCT and the remaining three global timer
+ interrupts are unused. Two local timer interrupts have been
+ specified.
+
+ mct at 10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+ <0 42 0>, <0 48 0>;
+ samsung,mct-nr-local-irqs = <2>;
+ };
+
+Example 2: In this example, the MCT global and local timer interrupts are
+ connected to two seperate interrupt controllers. Hence, an
+ interrupt-map is created to map the interrupts to the respective
+ interrupt controllers.
+
+ mct at 101C0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101C0000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+ samsung,mct-nr-local-irqs = <2>;
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &combiner 23 3>,
+ <0x4 0 &gic 0 120 0>,
+ <0x5 0 &gic 0 121 0>;
+ };
+ };
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 1f4dc35..c0e75d8 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -30,8 +30,6 @@
/* For EXYNOS4 and EXYNOS5 */
-#define EXYNOS_IRQ_MCT_LOCALTIMER IRQ_PPI(12)
-
#define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32)
/* For EXYNOS4 SoCs */
@@ -323,8 +321,6 @@
#define EXYNOS5_IRQ_CEC IRQ_SPI(114)
#define EXYNOS5_IRQ_SATA IRQ_SPI(115)
-#define EXYNOS5_IRQ_MCT_L0 IRQ_SPI(120)
-#define EXYNOS5_IRQ_MCT_L1 IRQ_SPI(121)
#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123)
#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124)
#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125)
@@ -419,8 +415,6 @@
#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(22, 4)
#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0)
-#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3)
-#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4)
#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0)
#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1)
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 2f4ea16..bf359f6 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -20,6 +20,8 @@
#include <linux/delay.h>
#include <linux/percpu.h>
#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
#include <asm/arch_timer.h>
#include <asm/hardware/gic.h>
@@ -485,14 +487,16 @@ static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = {
};
#endif /* CONFIG_LOCAL_TIMERS */
-static void __init exynos4_timer_resources(void)
+static void __init exynos4_timer_resources(struct device_node *np)
{
struct clk *mct_clk;
mct_clk = clk_get(NULL, "xtal");
clk_rate = clk_get_rate(mct_clk);
- reg_base = S5P_VA_SYSTIMER;
+ reg_base = np ? of_iomap(np, 0) : S5P_VA_SYSTIMER;
+ if (!reg_base)
+ panic("%s: unable to ioremap mct address space\n", __func__);
#ifdef CONFIG_LOCAL_TIMERS
if (mct_int_type == MCT_INT_PPI) {
@@ -511,28 +515,39 @@ static void __init exynos4_timer_resources(void)
static void __init exynos_timer_init(void)
{
+ struct device_node *np;
+ u32 nr_irqs, i;
+
if (soc_is_exynos5440()) {
arch_timer_of_register();
return;
}
- if (soc_is_exynos4210()) {
+ np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-mct");
+ if (np) {
+ if (of_machine_is_compatible("samsung,exynos4210") ||
+ of_machine_is_compatible("samsung,exynos5250"))
+ mct_int_type = MCT_INT_SPI;
+ else
+ mct_int_type = MCT_INT_PPI;
+
+ if (of_property_read_u32(np, "samsung,mct-nr-local-irqs",
+ &nr_irqs))
+ panic("%s: number of local irqs not specified\n",
+ __func__);
+
+ mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
+ for (i = 0; i < nr_irqs; i++)
+ mct_irqs[MCT_L0_IRQ + i] =
+ irq_of_parse_and_map(np, MCT_L0_IRQ + i);
+ } else if (soc_is_exynos4210()) {
mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0;
mct_irqs[MCT_L0_IRQ] = EXYNOS4_IRQ_MCT_L0;
mct_irqs[MCT_L1_IRQ] = EXYNOS4_IRQ_MCT_L1;
mct_int_type = MCT_INT_SPI;
- } else if (soc_is_exynos5250()) {
- mct_irqs[MCT_G0_IRQ] = EXYNOS5_IRQ_MCT_G0;
- mct_irqs[MCT_L0_IRQ] = EXYNOS5_IRQ_MCT_L0;
- mct_irqs[MCT_L1_IRQ] = EXYNOS5_IRQ_MCT_L1;
- mct_int_type = MCT_INT_SPI;
- } else {
- mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0;
- mct_irqs[MCT_L0_IRQ] = EXYNOS_IRQ_MCT_LOCALTIMER;
- mct_int_type = MCT_INT_PPI;
}
- exynos4_timer_resources();
+ exynos4_timer_resources(np);
exynos4_clocksource_init();
exynos4_clockevent_init();
}
--
1.7.4.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 4/5] ARM: Exynos: remove static io-remapping of mct registers for Exynos5
2012-11-24 20:44 [PATCH v2 0/5] ARM: Exynos: Enable device tree support for MCT controller Thomas Abraham
` (2 preceding siblings ...)
2012-11-24 20:44 ` [PATCH v2 3/5] ARM: Exynos: add device tree support for MCT controller driver Thomas Abraham
@ 2012-11-24 20:44 ` Thomas Abraham
2012-11-24 20:44 ` [PATCH v2 5/5] ARM: dts: add mct device tree node for all supported Exynos SoC's Thomas Abraham
4 siblings, 0 replies; 6+ messages in thread
From: Thomas Abraham @ 2012-11-24 20:44 UTC (permalink / raw)
To: linux-arm-kernel
With device tree support enabled for MCT controller, the static io-remapping
of the MCT controller address space is removed for Exynos5 platforms (which
supports only device tree based boot).
Cc: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
---
arch/arm/mach-exynos/common.c | 5 -----
arch/arm/mach-exynos/include/mach/map.h | 1 -
2 files changed, 0 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 95c0882..8fafac5 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -253,11 +253,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_SYSRAM,
.pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM),
.length = SZ_4K,
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 1df6abb..7f99b7b 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -65,7 +65,6 @@
#define EXYNOS5_PA_CMU 0x10010000
#define EXYNOS4_PA_SYSTIMER 0x10050000
-#define EXYNOS5_PA_SYSTIMER 0x101C0000
#define EXYNOS4_PA_WATCHDOG 0x10060000
#define EXYNOS5_PA_WATCHDOG 0x101D0000
--
1.7.4.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 5/5] ARM: dts: add mct device tree node for all supported Exynos SoC's
2012-11-24 20:44 [PATCH v2 0/5] ARM: Exynos: Enable device tree support for MCT controller Thomas Abraham
` (3 preceding siblings ...)
2012-11-24 20:44 ` [PATCH v2 4/5] ARM: Exynos: remove static io-remapping of mct registers for Exynos5 Thomas Abraham
@ 2012-11-24 20:44 ` Thomas Abraham
4 siblings, 0 replies; 6+ messages in thread
From: Thomas Abraham @ 2012-11-24 20:44 UTC (permalink / raw)
To: linux-arm-kernel
Add MCT device tree node for Exynos4210, Exynos4212, Exynos4412 and Exynos5250.
Cc: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
---
arch/arm/boot/dts/exynos4210.dtsi | 8 ++++++++
arch/arm/boot/dts/exynos4212.dtsi | 10 ++++++++++
arch/arm/boot/dts/exynos4412.dtsi | 8 ++++++++
arch/arm/boot/dts/exynos5250.dtsi | 21 +++++++++++++++++++++
4 files changed, 47 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index e31bfc4..cca1546 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -47,6 +47,14 @@
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
+ mct at 10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+ <0 42 0>, <0 48 0>;
+ samsung,mct-nr-local-irqs = <4>;
+ };
+
pinctrl_0: pinctrl at 11400000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11400000 0x1000>;
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index c6ae200..87c6da4 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -25,4 +25,14 @@
gic:interrupt-controller at 10490000 {
cpu-offset = <0x8000>;
};
+
+ mct at 10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+ <1 12 0>, <1 12 0>;
+ samsung,mct-nr-local-irqs = <2>;
+ };
+
+
};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index d7dfe31..ccf020a 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -25,4 +25,12 @@
gic:interrupt-controller at 10490000 {
cpu-offset = <0x4000>;
};
+
+ mct at 10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+ <1 12 0>, <1 12 0>, <1 12 0>, <1 12 0>;
+ samsung,mct-nr-local-irqs = <4>;
+ };
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 39fc4bd..959aa1a 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -70,6 +70,27 @@
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
};
+ mct at 101C0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101C0000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+ samsung,mct-nr-local-irqs = <2>;
+
+ mct_map: mct-map {
+ compatible = "samsung,mct-map";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &combiner 23 3>,
+ <0x4 0 &gic 0 120 0>,
+ <0x5 0 &gic 0 121 0>;
+ };
+ };
+
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x101D0000 0x100>;
--
1.7.4.4
^ permalink raw reply related [flat|nested] 6+ messages in thread