From: thomas.abraham@linaro.org (Thomas Abraham)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 09/12] ARM: dts: add clock provider information for all controllers in Exynos4 SoC
Date: Sun, 25 Nov 2012 02:48:02 +0530 [thread overview]
Message-ID: <1353791885-2566-10-git-send-email-thomas.abraham@linaro.org> (raw)
In-Reply-To: <1353791885-2566-1-git-send-email-thomas.abraham@linaro.org>
For all supported peripheral controllers on Exynos4, add clock lookup
information.
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
---
arch/arm/boot/dts/exynos4.dtsi | 48 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 48 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 3428f1a..7486462 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -86,6 +86,8 @@
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
interrupts = <0 43 0>;
+ clocks = <&clock 345>;
+ clock-names = "watchdog";
status = "disabled";
};
@@ -93,6 +95,8 @@
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupts = <0 44 0>, <0 45 0>;
+ clocks = <&clock 346>;
+ clock-names = "rtc";
status = "disabled";
};
@@ -100,6 +104,8 @@
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
interrupts = <0 109 0>;
+ clocks = <&clock 347>;
+ clock-names = "keypad";
status = "disabled";
};
@@ -107,6 +113,8 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12510000 0x100>;
interrupts = <0 73 0>;
+ clocks = <&clock 297>, <&clock 145>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -114,6 +122,8 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12520000 0x100>;
interrupts = <0 74 0>;
+ clocks = <&clock 298>, <&clock 146>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -121,6 +131,8 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12530000 0x100>;
interrupts = <0 75 0>;
+ clocks = <&clock 299>, <&clock 147>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -128,6 +140,8 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12540000 0x100>;
interrupts = <0 76 0>;
+ clocks = <&clock 300>, <&clock 148>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -135,6 +149,8 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
interrupts = <0 52 0>;
+ clocks = <&clock 312>, <&clock 151>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -142,6 +158,8 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
interrupts = <0 53 0>;
+ clocks = <&clock 313>, <&clock 152>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -149,6 +167,8 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
+ clocks = <&clock 314>, <&clock 153>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -156,6 +176,8 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
interrupts = <0 55 0>;
+ clocks = <&clock 315>, <&clock 154>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -165,6 +187,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
interrupts = <0 58 0>;
+ clocks = <&clock 317>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -174,6 +198,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
interrupts = <0 59 0>;
+ clocks = <&clock 318>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -183,6 +209,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
interrupts = <0 60 0>;
+ clocks = <&clock 319>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -192,6 +220,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
interrupts = <0 61 0>;
+ clocks = <&clock 320>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -201,6 +231,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
interrupts = <0 62 0>;
+ clocks = <&clock 321>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -210,6 +242,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
interrupts = <0 63 0>;
+ clocks = <&clock 322>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -219,6 +253,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
interrupts = <0 64 0>;
+ clocks = <&clock 323>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -228,6 +264,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
interrupts = <0 65 0>;
+ clocks = <&clock 324>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -239,6 +277,8 @@
rx-dma-channel = <&pdma0 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 327>, <&clock 159>;
+ clock-names = "spi", "spi_busclk0";
status = "disabled";
};
@@ -250,6 +290,8 @@
rx-dma-channel = <&pdma1 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 328>, <&clock 160>;
+ clock-names = "spi", "spi_busclk0";
status = "disabled";
};
@@ -261,6 +303,8 @@
rx-dma-channel = <&pdma0 8>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 329>, <&clock 161>;
+ clock-names = "spi", "spi_busclk0";
status = "disabled";
};
@@ -275,12 +319,16 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <0 35 0>;
+ clocks = <&clock 292>;
+ clock-names = "apb_pclk";
};
pdma1: pdma at 12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <0 36 0>;
+ clocks = <&clock 293>;
+ clock-names = "apb_pclk";
};
};
};
--
1.7.4.4
next prev parent reply other threads:[~2012-11-24 21:18 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-24 21:17 [PATCH v4 00/12] clk: exynos4: migrate to common clock framework Thomas Abraham
2012-11-24 21:17 ` [PATCH v4 01/12] clk: samsung: add common clock framework helper functions for Samsung platforms Thomas Abraham
2012-11-24 21:17 ` [PATCH v4 02/12] clk: samsung: add pll clock registration helper functions Thomas Abraham
2012-11-24 21:17 ` [PATCH v4 03/12] clk: exynos4: register clocks using common clock framework Thomas Abraham
2012-11-24 21:17 ` [PATCH v4 04/12] ARM: Exynos: Rework timer initialization sequence Thomas Abraham
2012-11-24 21:17 ` [PATCH v4 05/12] ARM: Exynos4: Migrate clock support to common clock framework Thomas Abraham
2012-11-24 21:17 ` [PATCH v4 06/12] ARM: dts: add exynos4 clock controller nodes Thomas Abraham
2012-11-24 21:18 ` [PATCH v4 07/12] ARM: dts: add xxti and xusbxti fixed rate clock nodes for exynos4 based platforms Thomas Abraham
2012-11-24 21:18 ` [PATCH v4 08/12] ARM: Exynos4: allow legacy board support to specify xxti and xusbxti clock speed Thomas Abraham
2012-11-24 21:18 ` Thomas Abraham [this message]
2012-11-24 21:18 ` [PATCH v4 10/12] ARM: Exynos4: remove auxdata table from machine file Thomas Abraham
2012-11-24 21:18 ` [PATCH v4 11/12] ARM: Exynos: use fin_pll clock as the tick clock source for mct Thomas Abraham
2012-11-24 21:18 ` [PATCH v4 12/12] ARM: Exynos: add support for mct clock setup Thomas Abraham
2012-11-26 19:31 ` [PATCH v4 00/12] clk: exynos4: migrate to common clock framework Mike Turquette
2012-11-27 0:57 ` Kukjin Kim
2012-11-27 17:31 ` Mike Turquette
2012-11-27 8:54 ` Thomas Abraham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353791885-2566-10-git-send-email-thomas.abraham@linaro.org \
--to=thomas.abraham@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).