From: c.dall@virtualopensystems.com (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: Factor out cpuid implementor and part number
Date: Thu, 29 Nov 2012 14:47:21 -0500 [thread overview]
Message-ID: <1354218441-24866-1-git-send-email-c.dall@virtualopensystems.com> (raw)
Decoding the implementor and part number of the CPU id in the CPU ID
register is needed by KVM, so we factor it out to share the code.
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
---
Applies to Will Deacon's perf/updates branch
arch/arm/include/asm/cputype.h | 26 ++++++++++++++++++++++++++
arch/arm/kernel/perf_event_cpu.c | 31 ++++++++++++++++---------------
2 files changed, 42 insertions(+), 15 deletions(-)
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index cb47d28..306fb2c 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -51,6 +51,22 @@ extern unsigned int processor_id;
#define read_cpuid_ext(reg) 0
#endif
+#define IMPLEMENTOR_ARM 0x41
+#define IMPLEMENTOR_INTEL 0x69
+
+#define PART_NUMBER_ARM1136 0xB360
+#define PART_NUMBER_ARM1156 0xB560
+#define PART_NUMBER_ARM1176 0xB760
+#define PART_NUMBER_ARM11MPCORE 0xB020
+#define PART_NUMBER_CORTEX_A8 0xC080
+#define PART_NUMBER_CORTEX_A9 0xC090
+#define PART_NUMBER_CORTEX_A5 0xC050
+#define PART_NUMBER_CORTEX_A15 0xC0F0
+#define PART_NUMBER_CORTEX_A7 0xC070
+
+#define PART_NUMBER_XSCALE1 0x1
+#define PART_NUMBER_XSCALE2 0x2
+
/*
* The CPU ID never changes at run time, so we might as well tell the
* compiler that it's constant. Use this function to read the CPU ID
@@ -61,6 +77,16 @@ static inline unsigned int __attribute_const__ read_cpuid_id(void)
return read_cpuid(CPUID_ID);
}
+static inline unsigned int __attribute_const__ read_cpuid_implementor(void)
+{
+ return (read_cpuid_id() & 0xFF000000) >> 24;
+}
+
+static inline unsigned int __attribute_const__ read_cpuid_part_number(void)
+{
+ return (read_cpuid_id() & 0xFFF0);
+}
+
static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
{
return read_cpuid(CPUID_CACHETYPE);
diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c
index 9a4f630..fb817e1 100644
--- a/arch/arm/kernel/perf_event_cpu.c
+++ b/arch/arm/kernel/perf_event_cpu.c
@@ -202,47 +202,48 @@ static int __devinit probe_current_pmu(struct arm_pmu *pmu)
{
int cpu = get_cpu();
unsigned long cpuid = read_cpuid_id();
- unsigned long implementor = (cpuid & 0xFF000000) >> 24;
- unsigned long part_number = (cpuid & 0xFFF0);
+ unsigned long implementor = read_cpuid_implementor();
+ unsigned long part_number = read_cpuid_part_number();
int ret = -ENODEV;
pr_info("probing PMU on CPU %d\n", cpu);
/* ARM Ltd CPUs. */
- if (0x41 == implementor) {
+ if (implementor == IMPLEMENTOR_ARM) {
switch (part_number) {
- case 0xB360: /* ARM1136 */
- case 0xB560: /* ARM1156 */
- case 0xB760: /* ARM1176 */
+ case PART_NUMBER_ARM1136:
+ case PART_NUMBER_ARM1156:
+ case PART_NUMBER_ARM1176:
ret = armv6pmu_init(pmu);
break;
- case 0xB020: /* ARM11mpcore */
+ case PART_NUMBER_ARM11MPCORE:
ret = armv6mpcore_pmu_init(pmu);
break;
- case 0xC080: /* Cortex-A8 */
+ case PART_NUMBER_CORTEX_A8:
ret = armv7_a8_pmu_init(pmu);
break;
- case 0xC090: /* Cortex-A9 */
+ case PART_NUMBER_CORTEX_A9:
ret = armv7_a9_pmu_init(pmu);
break;
- case 0xC050: /* Cortex-A5 */
+ case PART_NUMBER_CORTEX_A5:
ret = armv7_a5_pmu_init(pmu);
break;
- case 0xC0F0: /* Cortex-A15 */
+ case PART_NUMBER_CORTEX_A15:
ret = armv7_a15_pmu_init(pmu);
break;
- case 0xC070: /* Cortex-A7 */
+ break;
+ case PART_NUMBER_CORTEX_A7:
ret = armv7_a7_pmu_init(pmu);
break;
}
/* Intel CPUs [xscale]. */
- } else if (0x69 == implementor) {
+ } else if (implementor == IMPLEMENTOR_INTEL) {
part_number = (cpuid >> 13) & 0x7;
switch (part_number) {
- case 1:
+ case PART_NUMBER_XSCALE1:
ret = xscale1pmu_init(pmu);
break;
- case 2:
+ case PART_NUMBER_XSCALE2:
ret = xscale2pmu_init(pmu);
break;
}
--
1.7.9.5
reply other threads:[~2012-11-29 19:47 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1354218441-24866-1-git-send-email-c.dall@virtualopensystems.com \
--to=c.dall@virtualopensystems.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).