From: anilkumar.v@ti.com (Kumar, Anil)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: davinci: da850: add pinctrl driver entries
Date: Fri, 7 Dec 2012 15:57:30 +0530 [thread overview]
Message-ID: <1354876051-25938-2-git-send-email-anilkumar.v@ti.com> (raw)
In-Reply-To: <1354876051-25938-1-git-send-email-anilkumar.v@ti.com>
For DT, DaVinci platform can use pinctrl-single driver for handling
padconf registers.
Enable PINCTRL Kconfig for all DaVinci platform. Add required
pinctrl DT entries in da850 dts file.
Test procedure
1)Populate DT file with NAND node information.
2)Populate board DT file with pinmux information for NAND.
3)Boot and confirm NAND is detected by the kernel.
4)cat /proc/mtd to show partitions.
Signed-off-by: Kumar, Anil <anilkumar.v@ti.com>
---
:000000 100644 0000000... f999d9e... A Documentation/devicetree/bindings/arm/davinci/pinctrl.txt
:100644 100644 06e0adf... 54a5405... M arch/arm/Kconfig
:100644 100644 37dc5a3... 8cac9d2... M arch/arm/boot/dts/da850-evm.dts
:100644 100644 fbada87... 94471bc... M arch/arm/boot/dts/da850.dtsi
:100644 100644 f292239... 0892db4... M arch/arm/configs/da8xx_omapl_defconfig
.../devicetree/bindings/arm/davinci/pinctrl.txt | 29 ++++++++++++++++++++
arch/arm/Kconfig | 1 +
arch/arm/boot/dts/da850-evm.dts | 3 ++
arch/arm/boot/dts/da850.dtsi | 10 +++++++
arch/arm/configs/da8xx_omapl_defconfig | 1 +
5 files changed, 44 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/davinci/pinctrl.txt b/Documentation/devicetree/bindings/arm/davinci/pinctrl.txt
new file mode 100644
index 0000000..f999d9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/davinci/pinctrl.txt
@@ -0,0 +1,29 @@
+* Texas Instruments Davinci pinctrl-single
+
+This file provides information, what the device node for the
+davinci pinctrl-single interface contain.
+
+Required properties:
+- compatible: "pinctrl-single";
+
+- reg : offset and length of the register set for the mux registers
+
+- pinctrl-single,bit-per-mux: mask of allowed pinmux function bits in the
+ pinmux register
+
+- pinctrl-single,register-width: pinmux register access width in bits
+
+- pinctrl-single,function-mask: mask of allowed pinmux function bits in
+ the pinmux register
+
+Example:
+pmx_core:pinmux at 14120 {
+ compatible = "pinctrl-single";
+ reg = <0x14120 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+};
+~
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 06e0adf..54a5405 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -924,6 +924,7 @@ config ARCH_DAVINCI
select GENERIC_IRQ_CHIP
select HAVE_IDE
select NEED_MACH_GPIO_H
+ select PINCTRL
select USE_OF
select ZONE_DMA
help
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 37dc5a3..8cac9d2 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -15,6 +15,9 @@
model = "DA850/AM1808/OMAP-L138 EVM";
soc {
+ pmx_core:pinmux at 14120 {
+ status = "okay";
+ };
serial0: serial at 1c42000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index fbada87..94471bc 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -29,6 +29,16 @@
#size-cells = <1>;
ranges = <0x0 0x01c00000 0x400000>;
+ pmx_core:pinmux at 14120 {
+ compatible = "pinctrl-single";
+ reg = <0x14120 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ status = "disabled";
+ };
serial0: serial at 1c42000 {
compatible = "ns16550a";
reg = <0x42000 0x100>;
diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index f292239..0892db4 100644
--- a/arch/arm/configs/da8xx_omapl_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -81,6 +81,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DAVINCI=y
+CONFIG_PINCTRL_SINGLE=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_REGULATOR=y
--
1.7.4.1
next prev parent reply other threads:[~2012-12-07 10:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-07 10:27 [PATCH 0/2] ARM: davinci: da850: add pinctrl support Kumar, Anil
2012-12-07 10:27 ` Kumar, Anil [this message]
2013-01-07 15:05 ` [PATCH 1/2] ARM: davinci: da850: add pinctrl driver entries Sekhar Nori
2013-01-08 5:26 ` Kumar, Anil
2012-12-07 10:27 ` [PATCH 2/2] ARM: davinci: da850: add NAND " Kumar, Anil
2012-12-17 4:26 ` [PATCH 0/2] ARM: davinci: da850: add pinctrl support Kumar, Anil
2013-01-03 11:27 ` Kumar, Anil
2013-01-03 12:28 ` Sekhar Nori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1354876051-25938-2-git-send-email-anilkumar.v@ti.com \
--to=anilkumar.v@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).