From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Mon, 10 Dec 2012 08:55:55 +0000 Subject: [PATCH 06/12] ARM: ux500: Set correct MMCI regulator voltages in the ux5x0 Device Tree In-Reply-To: <1355129761-8088-1-git-send-email-lee.jones@linaro.org> References: <1355129761-8088-1-git-send-email-lee.jones@linaro.org> Message-ID: <1355129761-8088-7-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The voltages for the MMCI GPIO controlled voltage regulation differ depending on who you believe and where you pick the information up from. More recent internal code suggests that the true upper voltage from the shifter is actually v3.3, instead of the previously indicated v2.9. Let's mirror that change in the Device Tree file. Signed-off-by: Lee Jones --- arch/arm/boot/dts/dbx5x0.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 9f55363..bbea89a 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -634,12 +634,12 @@ compatible = "regulator-gpio"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; regulator-name = "mmci-reg"; regulator-type = "voltage"; states = <1800000 0x1 - 2900000 0x0>; + 3300000 0x0>; status = "disabled"; }; -- 1.7.9.5