From mboxrd@z Thu Jan 1 00:00:00 1970 From: robherring2@gmail.com (Rob Herring) Date: Wed, 12 Dec 2012 16:25:49 -0600 Subject: [PATCH 1/2] ARM: l2x0: Only set .set_debug on PL310 r3p0 and earlier Message-ID: <1355351150-15942-1-git-send-email-robherring2@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Rob Herring PL310 errata work-arounds using .set_debug function are only needed on r3p0 and earlier, so check the rev and only set .set_debug on older revs. Avoiding debug register accesses fixes aborts on non-secure platforms like highbank. It is assumed that non-secure platforms needing these work-arounds have already implemented .set_debug with secure monitor calls. Signed-off-by: Rob Herring --- arch/arm/mm/cache-l2x0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 8a97e64..6cf2fd1 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -334,7 +334,8 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) /* Unmapped register. */ sync_reg_offset = L2X0_DUMMY_REG; #endif - outer_cache.set_debug = pl310_set_debug; + if ((cache_id & L2X0_CACHE_ID_RTL_MASK) <= L2X0_CACHE_ID_RTL_R3P0) + outer_cache.set_debug = pl310_set_debug; break; case L2X0_CACHE_ID_PART_L210: ways = (aux >> 13) & 0xf; -- 1.7.10.4