From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Thu, 13 Dec 2012 13:22:06 +0000 Subject: [PATCH 4/8] ARM: ux500: Specify which IOS regulator to use for MMCI In-Reply-To: <1355404930-5691-1-git-send-email-lee.jones@linaro.org> References: <1355404930-5691-1-git-send-email-lee.jones@linaro.org> Message-ID: <1355404930-5691-5-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org In an effort to move platform specific GPIO controlled regulators out from platform code we've created a new mechanism to specify them from within the MMCI driver using the supply name 'vmmc-ios'. For that to happen when booting device tree, we need to supply it in the MMCI (SDI) node. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/href.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi index 592fb9d..f2c0f66 100644 --- a/arch/arm/boot/dts/href.dtsi +++ b/arch/arm/boot/dts/href.dtsi @@ -87,6 +87,7 @@ mmc-cap-sd-highspeed; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; + vqmmc-supply = <&vmmci>; cd-gpios = <&tc3589x_gpio 3 0x4>; -- 1.7.9.5