From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Thu, 13 Dec 2012 13:22:07 +0000 Subject: [PATCH 5/8] ARM: ux500: Use the correct name when supplying a GPIO enable pin In-Reply-To: <1355404930-5691-1-git-send-email-lee.jones@linaro.org> References: <1355404930-5691-1-git-send-email-lee.jones@linaro.org> Message-ID: <1355404930-5691-6-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Correct a typo in the Device Tree source file, where instead of specifying property 'enable-gpio', which the driver is expecting we specified 'gpio-enable' instead. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/hrefprev60.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts index eec29c4..9194fb6 100644 --- a/arch/arm/boot/dts/hrefprev60.dts +++ b/arch/arm/boot/dts/hrefprev60.dts @@ -40,7 +40,7 @@ vmmci: regulator-gpio { gpios = <&tc3589x_gpio 18 0x4>; - gpio-enable = <&tc3589x_gpio 17 0x4>; + enable-gpio = <&tc3589x_gpio 17 0x4>; status = "okay"; }; -- 1.7.9.5