[PATCH v3 1/2] ARM: Exynos5250: Enabling ehci-s5p driver

[gautam.vivek@samsung.com (Vivek Gautam)]

Adding EHCI device tree node for Exynos5250 along with
the device base adress and gpio line for vbus.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
---
 .../devicetree/bindings/usb/exynos-usb.txt         |   25 ++++++++++++++++++++
 arch/arm/boot/dts/exynos5250-smdk5250.dts          |    4 +++
 arch/arm/boot/dts/exynos5250.dtsi                  |    6 ++++
 arch/arm/mach-exynos/include/mach/map.h            |    1 +
 arch/arm/mach-exynos/mach-exynos5-dt.c             |    2 +
 5 files changed, 38 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/exynos-usb.txt

diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
new file mode 100644
index 0000000..e8bbb47
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
@@ -0,0 +1,25 @@
+Samsung Exynos SoC USB controller
+
+The USB devices interface with USB controllers on Exynos SOCs.
+The device node has following properties.
+
+EHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
+   EHCI controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+   region.
+ - interrupts: interrupt number to the cpu.
+
+Optional properties:
+ - samsung,vbus-gpio:  if present, specifies the GPIO that
+   needs to be pulled up for the bus to be powered.
+
+Example:
+
+	usb at 12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+	};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 711b55f..f990086 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -218,4 +218,8 @@
 	i2s_2: i2s at 12D70000 {
 		status = "disabled";
 	};
+
+	usb at 12110000 {
+		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 581e57a..584bb9a 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -299,6 +299,12 @@
 		rx-dma-channel = <&pdma0 11>; /* preliminary */
 	};
 
+	usb at 12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index cbb2852..b2c662f 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -201,6 +201,7 @@
 #define EXYNOS4_PA_EHCI			0x12580000
 #define EXYNOS4_PA_OHCI			0x12590000
 #define EXYNOS4_PA_HSPHY		0x125B0000
+#define EXYNOS5_PA_EHCI			0x12110000
 #define EXYNOS4_PA_MFC			0x13400000
 
 #define EXYNOS4_PA_UART			0x13800000
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index 462e5ac..b3b9af1 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -110,6 +110,8 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 				"samsung-i2s.1", NULL),
 	OF_DEV_AUXDATA("samsung,samsung-i2s", 0x12D70000,
 				"samsung-i2s.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-ehci", EXYNOS5_PA_EHCI,
+				"s5p-ehci", NULL),
 	{},
 };
 
-- 
1.7.6.5