From: ldewangan@nvidia.com (Laxman Dewangan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: tegra: dts: add aliases and DMA requestor for serial controller
Date: Wed, 19 Dec 2012 12:01:11 +0530 [thread overview]
Message-ID: <1355898671-3960-1-git-send-email-ldewangan@nvidia.com> (raw)
Add APB DMA requestor and serial aliases for serial controller.
There will be two serial driver i.e. 8250 based simple serial driver
and APB DMA based serial driver for higher baudrate and performace.
The simple serial driver get enabled with compatible nvidia,tegra20-uart
and APB DMA based driver will get enabled with compatible
nvidia,tegra20-hsuart.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
arch/arm/boot/dts/tegra20.dtsi | 30 +++++++++++++++++++++++++-----
arch/arm/boot/dts/tegra30.dtsi | 31 ++++++++++++++++++++++++++-----
2 files changed, 51 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index b8effa1..fe35c72 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -4,6 +4,14 @@
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
+ aliases {
+ serial0 = &uarta;
+ serial1 = &uartb;
+ serial2 = &uartc;
+ serial3 = &uartd;
+ serial4 = &uarte;
+ };
+
host1x {
compatible = "nvidia,tegra20-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
@@ -194,43 +202,55 @@
status = "disabled";
};
- serial at 70006000 {
+ /*
+ * There are two serial driver i.e. 8250 based simple serial
+ * driver and APB DMA based serial driver for higher baudrate
+ * and performace. To enable the 8250 based driver, the compatible
+ * is "nvidia,tegra20-uart" and to enable the APB DMA based serial
+ * driver, the comptible is "nvidia,tegra20-hsuart".
+ */
+ uarta: serial at 70006000 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
+ nvidia,dma-request-selector = <&apbdma 8>;
status = "disabled";
};
- serial at 70006040 {
+ uartb: serial at 70006040 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
+ nvidia,dma-request-selector = <&apbdma 9>;
status = "disabled";
};
- serial at 70006200 {
+ uartc: serial at 70006200 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
+ nvidia,dma-request-selector = <&apbdma 10>;
status = "disabled";
};
- serial at 70006300 {
+ uartd: serial at 70006300 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
+ nvidia,dma-request-selector = <&apbdma 19>;
status = "disabled";
};
- serial at 70006400 {
+ uarte: serial at 70006400 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <0 91 0x04>;
+ nvidia,dma-request-selector = <&apbdma 20>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 529fdb8..80a0edf 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -4,6 +4,14 @@
compatible = "nvidia,tegra30";
interrupt-parent = <&intc>;
+ aliases {
+ serial0 = &uarta;
+ serial1 = &uartb;
+ serial2 = &uartc;
+ serial3 = &uartd;
+ serial4 = &uarte;
+ };
+
host1x {
compatible = "nvidia,tegra30-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
@@ -190,43 +198,56 @@
0x70003000 0x3e4>; /* Mux registers */
};
- serial at 70006000 {
+ /*
+ * There are two serial driver i.e. 8250 based simple serial
+ * driver and APB DMA based serial driver for higher baudrate
+ * and performace. To enable the 8250 based driver, the compatible
+ * is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable
+ * the APB DMA based serial driver, the comptible is
+ * "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
+ */
+ uarta: serial at 70006000 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
+ nvidia,dma-request-selector = <&apbdma 8>;
status = "disabled";
};
- serial at 70006040 {
+ uartb: serial at 70006040 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
+ nvidia,dma-request-selector = <&apbdma 9>;
status = "disabled";
};
- serial at 70006200 {
+ uartc: serial at 70006200 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
+ nvidia,dma-request-selector = <&apbdma 10>;
status = "disabled";
};
- serial at 70006300 {
+ uartd: serial at 70006300 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
+ nvidia,dma-request-selector = <&apbdma 19>;
status = "disabled";
};
- serial at 70006400 {
+ uarte: serial at 70006400 {
compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <0 91 0x04>;
+ nvidia,dma-request-selector = <&apbdma 20>;
status = "disabled";
};
--
1.7.1.1
next reply other threads:[~2012-12-19 6:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-19 6:31 Laxman Dewangan [this message]
2012-12-19 17:00 ` [PATCH] ARM: tegra: dts: add aliases and DMA requestor for serial controller Stephen Warren
2012-12-20 6:15 ` Laxman Dewangan
2012-12-20 17:03 ` Stephen Warren
2012-12-21 4:18 ` Laxman Dewangan
2012-12-21 20:50 ` Stephen Warren
2012-12-22 20:15 ` Laxman Dewangan
2012-12-25 5:33 ` Stephen Warren
2012-12-25 9:43 ` Laxman Dewangan
2012-12-22 20:15 ` Laxman Dewangan
2013-01-02 19:19 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1355898671-3960-1-git-send-email-ldewangan@nvidia.com \
--to=ldewangan@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).