From mboxrd@z Thu Jan 1 00:00:00 1970 From: thomas.petazzoni@free-electrons.com (Thomas Petazzoni) Date: Fri, 21 Dec 2012 15:49:09 +0100 Subject: [PATCH v2 10/20] arm: mvebu: enable the SDIO interface on the Globalscale Mirabox In-Reply-To: <1356101359-6054-1-git-send-email-thomas.petazzoni@free-electrons.com> References: <1356101359-6054-1-git-send-email-thomas.petazzoni@free-electrons.com> Message-ID: <1356101359-6054-11-git-send-email-thomas.petazzoni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The Globalscale Mirabox uses the SDIO interface of the Armada 370 to connect to a Wifi/Bluetooth SD8787 chip, so we enable the SDIO interface of this board in its Device Tree file. Signed-off-by: Thomas Petazzoni --- arch/arm/boot/dts/armada-370-mirabox.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 3b40713..1864820 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -52,5 +52,15 @@ phy = <&phy1>; phy-mode = "rgmii-id"; }; + + mvsdio at d00d4000 { + pinctrl-0 = <&sdio_pins2>; + pinctrl-names = "default"; + status = "okay"; + /* + * No CD or WP GPIOs: SDIO interface used for + * Wifi/Bluetooth chip + */ + }; }; }; -- 1.7.9.5