From mboxrd@z Thu Jan 1 00:00:00 1970 From: thomas.petazzoni@free-electrons.com (Thomas Petazzoni) Date: Fri, 21 Dec 2012 15:49:12 +0100 Subject: [PATCH v2 13/20] arm: kirkwood: mplcec4: use Device Tree to probe SDIO In-Reply-To: <1356101359-6054-1-git-send-email-thomas.petazzoni@free-electrons.com> References: <1356101359-6054-1-git-send-email-thomas.petazzoni@free-electrons.com> Message-ID: <1356101359-6054-14-git-send-email-thomas.petazzoni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Now that the mvsdio driver has a Device Tree binding, and the SDIO controller is declared in kirkwood.dtsi, migrate the mplcec4 board to use the Device Tree to probe the SDIO controller and to mux the pins of the SDIO interface correctly. This patch has not been tested, it remains to be tested by a person having access to the hardware. Signed-off-by: Thomas Petazzoni Cc: Stefan Peter --- Changes since v1: * Remove the useless header inclusion from board-mplcec4.c, now that the SDIO interface is probed from the Device Tree. * Reference the pmx_sdio muxing option from the DT node describing the SDIO interface, in order to get proper muxing of this interface. --- arch/arm/boot/dts/kirkwood-mplcec4.dts | 11 +++++++++-- arch/arm/mach-kirkwood/board-mplcec4.c | 7 ------- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 262c654..662dfd8 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -20,12 +20,11 @@ pinctrl: pinctrl at 10000 { pinctrl-0 = < &pmx_nand &pmx_uart0 - &pmx_led_health &pmx_sdio + &pmx_led_health &pmx_sata0 &pmx_sata1 &pmx_led_user1o &pmx_led_user1g &pmx_led_user0o &pmx_led_user0g &pmx_led_misc - &pmx_sdio_cd >; pinctrl-names = "default"; @@ -133,6 +132,14 @@ status = "okay"; }; + + mvsdio at 90000 { + pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>; + pinctrl-names = "default"; + status = "okay"; + cd-gpios = <&gpio1 15 0>; + /* No WP GPIO */ + }; }; gpio-leds { diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c index 56bfe5a..73a0332 100644 --- a/arch/arm/mach-kirkwood/board-mplcec4.c +++ b/arch/arm/mach-kirkwood/board-mplcec4.c @@ -12,7 +12,6 @@ #include #include #include -#include #include "common.h" #include "mpp.h" @@ -24,11 +23,6 @@ static struct mv643xx_eth_platform_data mplcec4_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(2), }; -static struct mvsdio_platform_data mplcec4_mvsdio_data = { - .gpio_card_detect = 47, /* MPP47 used as SD card detect */ -}; - - void __init mplcec4_init(void) { /* @@ -36,7 +30,6 @@ void __init mplcec4_init(void) */ kirkwood_ge00_init(&mplcec4_ge00_data); kirkwood_ge01_init(&mplcec4_ge01_data); - kirkwood_sdio_init(&mplcec4_mvsdio_data); kirkwood_pcie_init(KW_PCIE0); } -- 1.7.9.5