From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@prisktech.co.nz (Tony Prisk) Date: Thu, 27 Dec 2012 13:21:34 +1300 Subject: [PATCH fix-3.8] rtc: vt8500: Correct handling of CR_24H bitfield Message-ID: <1356567694-3657-1-git-send-email-linux@prisktech.co.nz> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Control register bitfield for 12H/24H mode is handled incorrectly. Setting CR_24H actually enables 12H mode. This patch renames the define and changes the initialization code to correctly set 24H mode. Signed-off-by: Tony Prisk --- drivers/rtc/rtc-vt8500.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-vt8500.c b/drivers/rtc/rtc-vt8500.c index 14e2d8c..387edf6 100644 --- a/drivers/rtc/rtc-vt8500.c +++ b/drivers/rtc/rtc-vt8500.c @@ -70,7 +70,7 @@ | ALARM_SEC_BIT) #define VT8500_RTC_CR_ENABLE (1 << 0) /* Enable RTC */ -#define VT8500_RTC_CR_24H (1 << 1) /* 24h time format */ +#define VT8500_RTC_CR_12H (1 << 1) /* 12h time format */ #define VT8500_RTC_CR_SM_ENABLE (1 << 2) /* Enable periodic irqs */ #define VT8500_RTC_CR_SM_SEC (1 << 3) /* 0: 1Hz/60, 1: 1Hz */ #define VT8500_RTC_CR_CALIB (1 << 4) /* Enable calibration */ @@ -247,7 +247,7 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev) } /* Enable RTC and set it to 24-hour mode */ - writel(VT8500_RTC_CR_ENABLE | VT8500_RTC_CR_24H, + writel(VT8500_RTC_CR_ENABLE, vt8500_rtc->regbase + VT8500_RTC_CR); vt8500_rtc->rtc = rtc_device_register("vt8500-rtc", &pdev->dev, -- 1.7.9.5