* [PATCH fix-3.8] video: vt8500: Fix X crash when initializing framebuffer.
@ 2012-12-27 0:25 Tony Prisk
2012-12-27 1:08 ` Florian Tobias Schandinat
2012-12-28 19:59 ` Sergei Shtylyov
0 siblings, 2 replies; 3+ messages in thread
From: Tony Prisk @ 2012-12-27 0:25 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds support for .fb_check_var which is required when
X attempts to initialize the framebuffer. The only supported
resolution is the native resolution of the LCD panel, so we test
against the resolution supplied from the DT panel definition.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
drivers/video/wm8505fb.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 77539c1..c84e376 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -41,10 +41,18 @@
#define to_wm8505fb_info(__info) container_of(__info, \
struct wm8505fb_info, fb)
+
+struct lcd_params {
+ u32 pixel_width;
+ u32 pixel_height;
+ u32 color_depth;
+};
+
struct wm8505fb_info {
struct fb_info fb;
void __iomem *regbase;
unsigned int contrast;
+ struct lcd_params lcd_params;
};
@@ -248,8 +256,21 @@ static int wm8505fb_blank(int blank, struct fb_info *info)
return 0;
}
+static int wm8505fb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct wm8505fb_info *fbi = to_wm8505fb_info(info);
+ if (!fbi) return -EINVAL;
+
+ if (info->var.bits_per_pixel != fbi->lcd_params.color_depth) return -EINVAL;
+ if (info->var.xres != fbi->lcd_params.pixel_width) return -EINVAL;
+ if (info->var.yres != fbi->lcd_params.pixel_height) return -EINVAL;
+ return 0;
+}
+
static struct fb_ops wm8505fb_ops = {
.owner = THIS_MODULE,
+ .fb_check_var = wm8505fb_check_var,
.fb_set_par = wm8505fb_set_par,
.fb_setcolreg = wm8505fb_setcolreg,
.fb_fillrect = wmt_ge_fillrect,
@@ -354,6 +375,10 @@ static int __devinit wm8505fb_probe(struct platform_device *pdev)
goto failed_free_res;
}
+ fbi->lcd_params.pixel_width = of_mode.xres;
+ fbi->lcd_params.pixel_height = of_mode.yres;
+ fbi->lcd_params.color_depth = bpp;
+
of_mode.vmode = FB_VMODE_NONINTERLACED;
fb_videomode_to_var(&fbi->fb.var, &of_mode);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH fix-3.8] video: vt8500: Fix X crash when initializing framebuffer.
2012-12-27 0:25 [PATCH fix-3.8] video: vt8500: Fix X crash when initializing framebuffer Tony Prisk
@ 2012-12-27 1:08 ` Florian Tobias Schandinat
2012-12-28 19:59 ` Sergei Shtylyov
1 sibling, 0 replies; 3+ messages in thread
From: Florian Tobias Schandinat @ 2012-12-27 1:08 UTC (permalink / raw)
To: linux-arm-kernel
On 12/27/2012 12:25 AM, Tony Prisk wrote:
> This patch adds support for .fb_check_var which is required when
> X attempts to initialize the framebuffer. The only supported
> resolution is the native resolution of the LCD panel, so we test
> against the resolution supplied from the DT panel definition.
Nack. As far as I understand this driver behaves as it is supposed to do
according to drivers/video/skeletonfb.c. The frambuffer code seems to do
what is documented as well. If the X driver cannot cope with a different
var set than requested it needs to be fixed anyway as check_var is
always allowed to alter the parameters requested.
Strange, I thought I already saw X complaining about this when I added
30bpp mode to viafb.
Best regards,
Florian Tobias Schandinat
>
> Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
> ---
> drivers/video/wm8505fb.c | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
> index 77539c1..c84e376 100644
> --- a/drivers/video/wm8505fb.c
> +++ b/drivers/video/wm8505fb.c
> @@ -41,10 +41,18 @@
>
> #define to_wm8505fb_info(__info) container_of(__info, \
> struct wm8505fb_info, fb)
> +
> +struct lcd_params {
> + u32 pixel_width;
> + u32 pixel_height;
> + u32 color_depth;
> +};
> +
> struct wm8505fb_info {
> struct fb_info fb;
> void __iomem *regbase;
> unsigned int contrast;
> + struct lcd_params lcd_params;
> };
>
>
> @@ -248,8 +256,21 @@ static int wm8505fb_blank(int blank, struct fb_info *info)
> return 0;
> }
>
> +static int wm8505fb_check_var(struct fb_var_screeninfo *var,
> + struct fb_info *info)
> +{
> + struct wm8505fb_info *fbi = to_wm8505fb_info(info);
> + if (!fbi) return -EINVAL;
> +
> + if (info->var.bits_per_pixel != fbi->lcd_params.color_depth) return -EINVAL;
> + if (info->var.xres != fbi->lcd_params.pixel_width) return -EINVAL;
> + if (info->var.yres != fbi->lcd_params.pixel_height) return -EINVAL;
> + return 0;
> +}
> +
> static struct fb_ops wm8505fb_ops = {
> .owner = THIS_MODULE,
> + .fb_check_var = wm8505fb_check_var,
> .fb_set_par = wm8505fb_set_par,
> .fb_setcolreg = wm8505fb_setcolreg,
> .fb_fillrect = wmt_ge_fillrect,
> @@ -354,6 +375,10 @@ static int __devinit wm8505fb_probe(struct platform_device *pdev)
> goto failed_free_res;
> }
>
> + fbi->lcd_params.pixel_width = of_mode.xres;
> + fbi->lcd_params.pixel_height = of_mode.yres;
> + fbi->lcd_params.color_depth = bpp;
> +
> of_mode.vmode = FB_VMODE_NONINTERLACED;
> fb_videomode_to_var(&fbi->fb.var, &of_mode);
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH fix-3.8] video: vt8500: Fix X crash when initializing framebuffer.
2012-12-27 0:25 [PATCH fix-3.8] video: vt8500: Fix X crash when initializing framebuffer Tony Prisk
2012-12-27 1:08 ` Florian Tobias Schandinat
@ 2012-12-28 19:59 ` Sergei Shtylyov
1 sibling, 0 replies; 3+ messages in thread
From: Sergei Shtylyov @ 2012-12-28 19:59 UTC (permalink / raw)
To: linux-arm-kernel
Hello.
On 12/27/2012 03:25 AM, Tony Prisk wrote:
> This patch adds support for .fb_check_var which is required when
> X attempts to initialize the framebuffer. The only supported
> resolution is the native resolution of the LCD panel, so we test
> against the resolution supplied from the DT panel definition.
> Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
> ---
> drivers/video/wm8505fb.c | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
> diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
> index 77539c1..c84e376 100644
> --- a/drivers/video/wm8505fb.c
> +++ b/drivers/video/wm8505fb.c
[...]
> @@ -248,8 +256,21 @@ static int wm8505fb_blank(int blank, struct fb_info *info)
> return 0;
> }
>
> +static int wm8505fb_check_var(struct fb_var_screeninfo *var,
> + struct fb_info *info)
> +{
> + struct wm8505fb_info *fbi = to_wm8505fb_info(info);
> + if (!fbi) return -EINVAL;
> +
> + if (info->var.bits_per_pixel != fbi->lcd_params.color_depth) return -EINVAL;
> + if (info->var.xres != fbi->lcd_params.pixel_width) return -EINVAL;
> + if (info->var.yres != fbi->lcd_params.pixel_height) return -EINVAL;
> + return 0;
> +}
> +
[...]
$ scripts/checkpatch.pl
patches/video-vt8500-Fix-X-crash-when-initializing-framebuffer.patch
ERROR: code indent should use tabs where possible
#42: FILE: drivers/video/wm8505fb.c:263:
+ if (!fbi) return -EINVAL;$
WARNING: please, no spaces at the start of a line
#42: FILE: drivers/video/wm8505fb.c:263:
+ if (!fbi) return -EINVAL;$
ERROR: trailing statements should be on next line
#42: FILE: drivers/video/wm8505fb.c:263:
+ if (!fbi) return -EINVAL;
WARNING: line over 80 characters
#44: FILE: drivers/video/wm8505fb.c:265:
+ if (info->var.bits_per_pixel != fbi->lcd_params.color_depth) return -EINVAL;
ERROR: trailing statements should be on next line
#44: FILE: drivers/video/wm8505fb.c:265:
+ if (info->var.bits_per_pixel != fbi->lcd_params.color_depth) return -EINVAL;
ERROR: trailing statements should be on next line
#45: FILE: drivers/video/wm8505fb.c:266:
+ if (info->var.xres != fbi->lcd_params.pixel_width) return -EINVAL;
ERROR: trailing statements should be on next line
#46: FILE: drivers/video/wm8505fb.c:267:
+ if (info->var.yres != fbi->lcd_params.pixel_height) return -EINVAL;
total: 5 errors, 2 warnings, 49 lines checked
NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or
scripts/cleanfile
patches/video-vt8500-Fix-X-crash-when-initializing-framebuffer.patch has style
problems, please review.
If any of these errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
WBR, Sergei
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-12-28 19:59 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-12-27 0:25 [PATCH fix-3.8] video: vt8500: Fix X crash when initializing framebuffer Tony Prisk
2012-12-27 1:08 ` Florian Tobias Schandinat
2012-12-28 19:59 ` Sergei Shtylyov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox